nmap이 동일한 포트를 때로는 필터링된 것으로 표시하고 때로는 닫힌 것으로 표시하는 이유는 무엇입니까?

스마트 측정 장치에 대해 포트 범위 4050-4060을 검색하면 모든 포트가 닫힌 것으로 보고됩니다.

root@abc:~/rvm/dlms# nmap -p 4050-4060 192.168.1.242

Starting Nmap 6.47 ( http://nmap.org ) at 2016-04-08 15:09 CEST
Nmap scan report for 192.168.1.242
Host is up (0.0038s latency).
PORT     STATE  SERVICE
4050/tcp closed unknown
4051/tcp closed unknown
4052/tcp closed unknown
4053/tcp closed unknown
4054/tcp closed unknown
4055/tcp closed unknown
4056/tcp closed lms
4057/tcp closed unknown
4058/tcp closed kingfisher
4059/tcp closed unknown
4060/tcp closed unknown
MAC Address: 00:0F:93:00:C8:E5 (Landis+Gyr)

Nmap done: 1 IP address (1 host up) scanned in 5.40 seconds

포트 범위 4050-4059를 스캔하면(단 몇 초 후에) 일부 포트는 닫힌 것으로 보고되고 일부는 필터링된 것으로 보고됩니다.

root@abc:~/rvm/dlms# nmap -p 4050-4059 192.168.1.242

Starting Nmap 6.47 ( http://nmap.org ) at 2016-04-08 15:10 CEST
Nmap scan report for 192.168.1.242
Host is up (0.0038s latency).
PORT     STATE    SERVICE
4050/tcp closed   unknown
4051/tcp filtered unknown
4052/tcp closed   unknown
4053/tcp closed   unknown
4054/tcp closed   unknown
4055/tcp filtered unknown
4056/tcp filtered lms
4057/tcp closed   unknown
4058/tcp closed   kingfisher
4059/tcp filtered unknown
MAC Address: 00:0F:93:00:C8:E5 (Landis+Gyr)

Nmap done: 1 IP address (1 host up) scanned in 5.44 seconds

누구든지 어떤 아이디어가 있습니까?