Sendmail에서 authinfo 제공 시 "530 인증 필요" 오류 메시지 발생

Sendmail에서 authinfo 제공 시 "530 인증 필요" 오류 메시지 발생

sender_email- 존재하지 않는 이메일 주소이지만 수신 호스트가 다른 이메일의 이메일을 거부하므로 발신자 주소로 사용해야 합니다.

receiver_email- 메시지를 보낸 이메일이 수신되어야 합니다.

local_smtp- 로컬 네트워크의 다른 컴퓨터에 SMTP 서버를 설치하고 들어오는 모든 메일을 다음 컴퓨터로 전달하십시오.external_smtp

external_smtp- 다른 네트워크의 컴퓨터에 SMTP 서버를 설치하고 다른 네트워크에서 오지 않는 모든 이메일을 거부합니다.sender_email

특정 이메일의 이메일만 수락 하도록 이메일을 추가로 전달해야 하는 사용자/비밀번호로 이메일을 보내고 sender_email인증하도록 sendmail을 구성했습니다 . 이 경우에는 그렇습니다. 그러나 로그 파일에 따르면 인증에는 sendmail이 대신 사용됩니다 . 를 통해 인증하고 싶지 않습니다 . 왜냐하면 에 따라 다르기 때문입니다 .local_smtpexternal_smtpsender_emailexternal_smtplocal_smtpexternal_smtplocal_smtp

logfile:

10745 <<< Subject: Terminal Email Send
10745 <<<
10745 <<< Email Content line 1
10745 <<< Email Content line 2
10745 <<< [EOF]
10759 === CONNECT local_smtp.
10759 <<< 220 **********************************************************************^M
10759 >>> EHLO mgmt-snmp
10759 <<< 250-local_smtp says hello^M
10759 <<< 250-AUTH LOGIN PLAIN^M
10759 <<< 250-VRFY^M
10759 <<< 250 8BITMIME^M
10759 >>> MAIL From:<sender_email> AUTH=sender_email
10759 <<< 530 authentication required^M
10759 >>> This is a MIME-encapsulated message
10759 >>>
10759 >>> --t8IEdmbX010759.1442587188/mgmt-snmp
10759 >>>
10759 >>> The original message was received at Fri, 18 Sep 2015 16:39:48 +0200
10759 >>> from root@localhost
10759 >>>
10759 >>>    ----- The following addresses had permanent fatal errors -----
10759 >>> receiver_email
10759 >>>     (reason: 530 authentication required)
10759 >>>

관련이 있는 것 같은데 AUTH=sender_email어떻게 변경하는지 모르겠습니다.

sendmail.mc:

divert(-1)dnl
#-----------------------------------------------------------------------------
# $Sendmail: debproto.mc,v 8.14.4 2014-02-11 13:02:08 cowboy Exp $
#
# Copyright (c) 1998-2010 Richard Nelson.  All Rights Reserved.
#
# cf/debian/sendmail.mc.  Generated from sendmail.mc.in by configure.
#
# sendmail.mc prototype config file for building Sendmail 8.14.4
#
# Note: the .in file supports 8.7.6 - 9.0.0, but the generated
#   file is customized to the version noted above.
#
# This file is used to configure Sendmail for use with Debian systems.
#
# If you modify this file, you will have to regenerate /etc/mail/sendmail.cf
# by running this file through the m4 preprocessor via one of the following:
#   * make   (or make -C /etc/mail)
#   * sendmailconfig 
#   * m4 /etc/mail/sendmail.mc > /etc/mail/sendmail.cf
# The first two options are preferred as they will also update other files
# that depend upon the contents of this file.
#
# The best documentation for this .mc file is:
# /usr/share/doc/sendmail-doc/cf.README.gz
#
#-----------------------------------------------------------------------------
divert(0)dnl
#
#   Copyright (c) 1998-2005 Richard Nelson.  All Rights Reserved.
#
#  This file is used to configure Sendmail for use with Debian systems.
#
define(`_USE_ETC_MAIL_')dnl
include(`/usr/share/sendmail/cf/m4/cf.m4')dnl
VERSIONID(`$Id: sendmail.mc, v 8.14.4-4.1ubuntu1 2014-02-11 13:02:08 cowboy Exp $')
OSTYPE(`debian')dnl
DOMAIN(`debian-mta')dnl
dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE
undefine(`confHOST_STATUS_DIRECTORY')dnl        #DAEMON_HOSTSTATS=
dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE
dnl #
dnl # General defines
dnl #
dnl # SAFE_FILE_ENV: [undefined] If set, sendmail will do a chroot()
dnl #   into this directory before writing files.
dnl #   If *all* your user accounts are under /home then use that
dnl #   instead - it will prevent any writes outside of /home !
dnl #   define(`confSAFE_FILE_ENV',             `')dnl
dnl #
dnl # Daemon options - restrict to servicing LOCALHOST ONLY !!!
dnl # Remove `, Addr=' clauses to receive from any interface
dnl # If you want to support IPv6, switch the commented/uncommentd lines
dnl #
FEATURE(`no_default_msa')dnl
dnl DAEMON_OPTIONS(`Family=inet6, Name=MTA-v6, Port=smtp, Addr=::1')dnl
DAEMON_OPTIONS(`Family=inet,  Name=MTA-v4, Port=smtp')dnl
dnl DAEMON_OPTIONS(`Family=inet6, Name=MSP-v6, Port=submission, M=Ea, Addr=::1')dnl
DAEMON_OPTIONS(`Family=inet,  Name=MSP-v4, Port=submission, M=Ea, Addr=127.0.0.1')dnl
dnl #
dnl # Be somewhat anal in what we allow
define(`confPRIVACY_FLAGS',dnl
`needmailhelo,needexpnhelo,needvrfyhelo,restrictqrun,restrictexpand,nobodyreturn,authwarnings')dnl
dnl #
dnl # Define connection throttling and window length
define(`confCONNECTION_RATE_THROTTLE', `15')dnl
define(`confCONNECTION_RATE_WINDOW_SIZE',`10m')dnl
dnl #
dnl # Features
dnl #
dnl # use /etc/mail/local-host-names
FEATURE(`use_cw_file')dnl
dnl #
dnl # The access db is the basis for most of sendmail's checking
FEATURE(`access_db', , `skip')dnl
dnl #
dnl # The greet_pause feature stops some automail bots - but check the
dnl # provided access db for details on excluding localhosts...
FEATURE(`greet_pause', `1000')dnl 1 seconds
dnl #
dnl # Delay_checks allows sender<->recipient checking
FEATURE(`delay_checks', `friend', `n')dnl
dnl #
dnl # If we get too many bad recipients, slow things down...
define(`confBAD_RCPT_THROTTLE',`3')dnl
dnl #
dnl # Stop connections that overflow our concurrent and time connection rates
FEATURE(`conncontrol', `nodelay', `terminate')dnl
FEATURE(`ratecontrol', `nodelay', `terminate')dnl
dnl #
dnl # If you're on a dialup link, you should enable this - so sendmail
dnl # will not bring up the link (it will queue mail for later)
dnl define(`confCON_EXPENSIVE',`True')dnl
dnl #
dnl # Dialup/LAN connection overrides
dnl #
include(`/etc/mail/m4/dialup.m4')dnl
include(`/etc/mail/m4/provider.m4')dnl

dnl LOCAL_CONFIG
dnl EXPOSED_USER(root uucp)dnl # users exempt from masquerading
dnl LOCAL_USER(root)dnl
dnl MASQUERADE_AS(`external_smtp')dnl
dnl FEATURE(`allmasquerade')dnl
dnl FEATURE(`masquerade_envelope')dnl
dnl FEATURE(`nullclient', local_smtp)dnl

LOCAL_CONFIG
## Custom configurations below (will be preserved)
define(`SMART_HOST', `local_smtp')dnl
define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
FEATURE(`authinfo', `hash /etc/mail/authinfo')dnl
define(`RELAY_MAILER_ARGS', `TCP $h 25')dnl
dnl #
dnl # Default Mailer setup
MAILER_DEFINITIONS
MAILER(`local')dnl
MAILER(`smtp')dnl

authinfo:

AuthInfo:local_smtp "U:root" "I:my_username" "P:my_password"

답변1

루트로서 추적 맵(authinfo) 조회가 포함된 테스트 메시지를 보냅니다.

#!/bin/sh
# -d60.5 turn on traking map lookups
/usr/sbin/sendmail -d60.5 -v -i -fsender_email -- receiver_email  <<END
subject: test

test
END

다음 테스트의 가능한 결과를 정의합니다.

  • 인증 정보 조회 없음
  • 예상한 것과 다른 키를 사용하여 authinfo 조회
  • authinfo 조회에서 "일치 없음"이 반환됨
  • authinfo 조회가 올바른 값을 반환합니다.

관련 정보