Freeradius는 WAP 클라이언트를 볼 수 없습니다

Freeradius는 WAP 클라이언트를 볼 수 없습니다

Freeradius v.3 서버와 WAccessPoint(hostapd)가 모두 동일한 시스템(localhost) Ubuntu Server 16.04.1에 설치되어 있습니다.

먼저 freeradius 없이 연결을 테스트했습니다. -> WAP에 연결하고 NAS 및 MASQUERADE를 통해 인터넷을 사용할 수 있습니다.

Freeradius를 사용하여 인증을 시작하려고 할 때 WAP-PSK를 WAP-EAP로 변경하고 RADIUS-SERVER에 대해 hostapd.conf에 일부 줄을 추가한 다음 freeradius -X(디버그 모드에서)를 시작하지만 시도하면 연결 로그가 없습니다. AP.

Freeradius에 연결할 때마다 연결 성공 여부에 관계없이 기록되고 디버깅되어야 하지만 아무것도 표시되지 않습니다. 이는 내 클라이언트와 Freeradius가 서로를 인식하지 못한다는 의미입니다. 이것은 내 설정입니다.

호스트 구성 파일:

...
own_ip_addr=127.0.0.1
wpa_key_mgmt=WPA-EAP
rsn_pairwise=CCMP
wmm_enabled=1
wpa=2
channel=1
auth_algs=1
auth_server_addr=127.0.0.1
auth_server_port=1812
auth_server_shared_secret=secret 
...

/etc/freeradius/clients.conf

client localhost {
ipaddr=127.0.0.1
secret=secret
require_message_authenticator = yes
}

또한 WAP 인터페이스의 ipaddr을 사용하여 client.conf에 새 클라이언트를 생성하려고 시도했지만 나에게도 효과가 없었습니다.

업데이트 1:

자유 반경 -v:

FreeRADIUS Version 3.0.11, for host x86_64-pc-linux-gnu

netstat -alnp 네트워크 통계 grep 1812:

udp 0 0 0.0.0.0:1812 0.0.0.0:*
udp 0 0 127.0.0.1:25868 127.0.0.1:1812 ESTABLISHED 1191/hostapd

업데이트 2: 서버 구성 파일:

server {
listen {
    type = auth
    port = 1812
    ipaddr = *
}
authorize {
    preprocess
    eap {
            ok = return
    }
    expiration
    logintime
}
authenticate {
    eap
}
preacct {
    preprocess
    acct_unique
    suffix
    files
}
accounting {
    detail
    # unix
    radutmp
    # exec
    attr_filter.accounting_response
}
session {
    radutmp
}
post-auth {
    # exec
    Post-Auth-Type REJECT {
            attr_filter.access_reject
    }
}
pre-proxy {

}
post-proxy {
    eap
}

}

업데이트 3:

자유 반경-X:

    Server was built with: 
  accounting               : yes
  authentication           : yes
  ascend-binary-attributes : yes
  coa                      : yes
  control-socket           : yes
  detail                   : yes
  dhcp                     : yes
  dynamic-clients          : yes
  osfc2                    : no
  proxy                    : yes
  regex-pcre               : no
  regex-posix              : yes
  regex-posix-extended     : yes
  session-management       : yes
  stats                    : yes
  tcp                      : yes
  threads                  : yes
  tls                      : yes
  unlang                   : yes
  vmps                     : yes
  developer                : no
Server core libs:
  freeradius-server        : 3.0.11
  talloc                   : 2.0.*
  ssl                      : 1.0.2g release
Endianness:
  little
Compilation flags:
  cppflags : -Wdate-time -D_FORTIFY_SOURCE=2
  cflags   : -I/build/freeradius-G88Mfz/freeradius-3.0.11 -I/build/freeradius-G88Mfz/freeradius-3.0.11/src -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/autoconf.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/build.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/features.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/radpaths.h -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1
  ldflags  :  -Wl,-Bsymbolic-functions -Wl,-z,relro
  libs     : -lcrypto -lssl -ltalloc -lcap -lnsl -lresolv -ldl -lpthread -lreadline

Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/control
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/mynetwork
main {
 security {
    user = "freerad"
    group = "freerad"
    allow_core_dumps = no
 }
    name = "freeradius"
    prefix = "/usr"
    localstatedir = "/var"
    logdir = "/var/log/freeradius"
    run_dir = "/var/run/freeradius"
}
main {
    name = "freeradius"
    prefix = "/usr"
    localstatedir = "/var"
    sbindir = "/usr/sbin"
    logdir = "/var/log/freeradius"
    run_dir = "/var/run/freeradius"
    libdir = "/usr/lib/freeradius"
    radacctdir = "/var/log/freeradius/radacct"
    hostname_lookups = no
    max_request_time = 30
    cleanup_delay = 5
    max_requests = 16384
    pidfile = "/var/run/freeradius/freeradius.pid"
    checkrad = "/usr/sbin/checkrad"
    debug_level = 0
    proxy_requests = no
 log {
    stripped_names = no
    auth = yes
    auth_badpass = no
    auth_goodpass = no
    colourise = yes
    msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
    max_attributes = 200
    reject_delay = 1.000000
    status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client myclient {
    ipaddr = 10.0.0.1
    require_message_authenticator = yes
    secret = <<< secret >>>
  limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
  }
 }
 client localhost {
    ipaddr = 127.0.0.1
    require_message_authenticator = no
    secret = <<< secret >>>
    nas_type = "other"
    proto = "*"
  limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
  }
 }
 client localhost_ipv6 {
    ipv6addr = ::1
    require_message_authenticator = no
    secret = <<< secret >>>
  limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = eap
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
    filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
    header = "%t"
    permissions = 384
    locking = no
    escape_filenames = no
    log_packet_header = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
    filename = "/var/log/freeradius/linelog"
    escape_filenames = no
    syslog_severity = "info"
    permissions = 384
    format = "This is a log message for %{User-Name}"
    reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
    filename = "/var/log/freeradius/linelog-accounting"
    escape_filenames = no
    syslog_severity = "info"
    permissions = 384
    format = ""
    reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
    format = "prefix"
    delimiter = "/"
    ignore_default = no
    ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
    format = "suffix"
    delimiter = "@"
    ignore_default = no
    ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  realm realmpercent {
    format = "suffix"
    delimiter = "%"
    ignore_default = no
    ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
    format = "prefix"
    delimiter = "\\"
    ignore_default = no
    ignore_null = no
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
    wait = yes
    program = "/bin/echo %{User-Name}"
    input_pairs = "request"
    output_pairs = "reply"
    shell_escape = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
    filename = "/var/log/freeradius/radutmp"
    username = "%{User-Name}"
    case_sensitive = yes
    check_with_nas = yes
    permissions = 384
    caller_id = yes
  }
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
    wait = no
    input_pairs = "request"
    shell_escape = yes
    timeout = 10
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
    use_mppe = yes
    require_encryption = no
    require_strong = no
    with_ntdomain_hack = yes
   passchange {
   }
    allow_retry = yes
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
  cache cache_eap {
    driver = "rlm_cache_rbtree"
    key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
    ttl = 15
    max_entries = 0
    epoch = 0
    add_stats = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
    normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
    filename = "/etc/passwd"
    format = "*User-Name:Crypt-Password:"
    delimiter = ":"
    ignore_nislike = no
    ignore_empty = yes
    allow_multiple_keys = no
    hash_size = 100
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
    filename = "/etc/freeradius/mods-config/files/authorize"
    acctusersfile = "/etc/freeradius/mods-config/files/accounting"
    preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
  logintime {
    minimum_timeout = 60
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
    radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
    dhcp = yes
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration
  # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
    filename = "/var/log/freeradius/sradutmp"
    username = "%{User-Name}"
    case_sensitive = yes
    check_with_nas = yes
    permissions = 420
    caller_id = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
  preprocess {
    huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
    hints = "/etc/freeradius/mods-config/preprocess/hints"
    with_ascend_hack = no
    ascend_channels_per_line = 23
    with_ntdomain_hack = no
    with_specialix_jetstream_hack = no
    with_cisco_vsa_hack = no
    with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
    safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
    filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
    key = "%{Realm}"
    relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
    filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
    key = "%{Realm}"
    relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
    filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
    key = "%{User-Name}"
    relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
    filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
    key = "%{User-Name}"
    relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
    filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
    key = "%{User-Name}"
    relaxed = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
    default_eap_type = "tls"
    timer_expire = 60
    ignore_unknown_eap_types = no
    cisco_accounting_username_bug = no
    max_sessions = 4096
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
    rcode = "reject"
    simulcount = 0
    mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
    rcode = "fail"
    simulcount = 0
    mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
    rcode = "ok"
    simulcount = 0
    mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
    rcode = "handled"
    simulcount = 0
    mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
    rcode = "invalid"
    simulcount = 0
    mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
    rcode = "userlock"
    simulcount = 0
    mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
    rcode = "notfound"
    simulcount = 0
    mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
    rcode = "noop"
    simulcount = 0
    mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
    rcode = "updated"
    simulcount = 0
    mpp = no
  }
  # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
  detail auth_log {
    filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
    header = "%t"
    permissions = 384
    locking = no
    escape_filenames = no
    log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  detail reply_log {
    filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
    header = "%t"
    permissions = 384
    locking = no
    escape_filenames = no
    log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
    filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
    header = "%t"
    permissions = 384
    locking = no
    escape_filenames = no
    log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
    filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
    header = "%t"
    permissions = 384
    locking = no
    escape_filenames = no
    log_packet_header = no
  }
  # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
    wait = yes
    program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
    shell_escape = yes
  }
  instantiate {
  }
  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
  # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
  # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
  # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"   found in filter list for realm "DEFAULT". 
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"  found in filter list for realm "DEFAULT". 
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/freeradius/certs"
    pem_file_type = yes
    private_key_file = "/etc/freeradius/certs/server.key"
    certificate_file = "/etc/freeradius/certs/server.pem"
    ca_file = "/etc/freeradius/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/freeradius/certs/dh"
    random_file = "/dev/urandom"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "HIGH"
    ecdh_curve = "prime256v1"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
        tmpdir = "/tmp/radiusd"
        client = "/usr/bin/openssl verify -CApath /etc/freeradius/certs %{TLS-Client-Cert-Filename}"
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/sites-enabled/mynetwork
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading post-auth {...}
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
    type = "auth"
    ipaddr = *
    port = 1812
}
Listening on auth address * port 1812
Ready to process requests

답변1

귀하의 localhost 항목은 다음과 같습니다 /etc/freeradius/clients.conf.

client localhost {
    ipaddr = 127.0.0.1
    secret      = secret
    require_message_authenticator = no
    nas_type     = other
}

nas_type일반적으로 cisco, livingston또는 other.

또한 Hostapd.conf를 확인하십시오. 또한 설정해야 합니다.ieee8021x=1

CoA/연결 끊김 메시지를 보내는 것이 require_message_authenticator더 유용하며 이를 구성하려면 [아직] 필요하지 않습니다 radius_das_require_message_authenticator=1.hostapd.conf

디버깅을 실행하려면 데몬 freeradius -X도 중지해야 합니다 freeradius. netstat 명령에서 1812가 수신 대기 중이므로 서비스가 실행 중임을 알 수 있습니다. 디버깅에서는 단일 스레드 데몬에서 다시 시작한다고 가정합니다.

Freeradius는 "듣기...요청 처리 준비 완료"까지 시작됩니다. 진짜 재미는 여기에서 시작됩니다. 그 이후의 모든 것은 Wi-Fi 클라이언트 트랜잭션을 디버그하고 확인하는 것입니다. 서비스를 재개하려면 언제든지 ^C를 사용하여 종료하고 서비스를 다시 시작할 수 있습니다.

password클라이언트.conf의 /secret은 디버깅 명령이나 호스트패드.conf에 사용되는 /secret와 동일해야 합니다 . 그렇지 않으면 freeradius는 다른 비밀이 포함된 패킷을 거부합니다.

다른 사람들의 이익을 위해 FreeRadius 요청을 디버그하는 데 사용하는 디버깅 명령은 다음과 같습니다.

echo "Message-Authenticator = 0x00,FreeRADIUS-Statistics-Type = 31" | radclient localhost:18121 status adminsecret

이 작업에서는 상태를 확인하지만 가상 호스트가 활성 상태여야 합니다.

그리고:

echo "User-Name=test,User-Password=mypass,Framed-Protocol=PPP " | /usr/local/bin/radclient localhost:1812 auth secret

앞으로는 Freeradius에 더 익숙해진 후 이 설정을 프로덕션에서 사용하고 싶다면 수많은 버그 수정이 있으므로 github에서 현재 3.0.13을 다운로드하여 컴파일하는 것이 좋습니다.

관련 정보