Linux 네임스페이스 간 라우팅

Linux 네임스페이스를 사용하는 다음과 같은 네트워크 토폴로지가 있습니다.

.--------.veth0       .--------.veth2       .--------.
| ns_snd |------------| ns_mid |------------| ns_rcv |
'--------'       veth1'--------'       veth3'--------'

veth0: 10.0.0.1/30
veth1: 10.0.0.2/30
veth2: 10.0.0.5/30
veth3: 10.0.0.6/30

veth0은 ns_snd에 속하고,
veth[1,2]는 ns_mid에 속하고,
veth3은 ns_rcv에 속합니다.

명령은 다음과 같습니다:

S1="veth0"
S2M1="veth1"
M2R1="veth2"
R1="veth3"

NS_SND="ns_snd"
NS_RCV="ns_rcv"
NS_MID="ns_mid"


#Remove existing namespace
sudo ip netns del $NS_SND
sudo ip netns del $NS_RCV
sudo ip netns del $NS_MID

#Remove existing veth pairs
sudo ip link del $S1
sudo ip link del $R1
sudo ip link del $S2M1
sudo ip link del $M2R1

#Create veth pairs
sudo ip link add $S1 type veth peer name $S2M1
sudo ip link add $M2R1 type veth peer name $R1

#Bring up
sudo ip link set dev $S1 up
sudo ip link set dev $S2M1 up
sudo ip link set dev $M2R1 up
sudo ip link set dev $R1 up


#Create the specific namespaces
sudo ip netns add $NS_SND
sudo ip netns add $NS_RCV
sudo ip netns add $NS_MID

#Move the interfaces to the namespace
sudo ip link set $S1 netns $NS_SND
sudo ip link set $S2M1 netns $NS_MID
sudo ip link set $M2R1 netns $NS_MID
sudo ip link set $R1 netns $NS_RCV

#Configure the loopback interface in namespace
sudo ip netns exec $NS_SND ip address add 127.0.0.1/8 dev lo
sudo ip netns exec $NS_SND ip link set dev lo up
sudo ip netns exec $NS_RCV ip address add 127.0.0.1/8 dev lo
sudo ip netns exec $NS_RCV ip link set dev lo up
sudo ip netns exec $NS_MID ip address add 127.0.0.1/8 dev lo
sudo ip netns exec $NS_MID ip link set dev lo up

#add bridge
#sudo ip netns exec $NS_MID brctl addbr br549
#sudo ip netns exec $NS_MID brctl addif br549 $S2M1
#sudo ip netns exec $NS_MID brctl addif br549 $M2R1
#sudo ip netns exec $NS_RCV ip route add 10.0.0.0/30 via 10.0.0.5

#Bring up interface in namespace
sudo ip netns exec $NS_SND ip link set dev $S1 up
sudo ip netns exec $NS_SND ip address add 10.0.0.1/30 dev $S1
sudo ip netns exec $NS_MID ip link set dev $S2M1 up
sudo ip netns exec $NS_MID ip address add 10.0.0.2/30 dev $S2M1
sudo ip netns exec $NS_MID ip link set dev $M2R1 up
sudo ip netns exec $NS_MID ip address add 10.0.0.5/30 dev $M2R1
sudo ip netns exec $NS_RCV ip link set dev $R1 up
sudo ip netns exec $NS_RCV ip address add 10.0.0.6/30 dev $R1

#Add ip routes
sudo ip netns exec $NS_SND ip route add 10.0.0.4/30 via 10.0.0.2
sudo ip netns exec $NS_RCV ip route add 10.0.0.0/30 via 10.0.0.5

#sudo ip netns exec $NS_SND "./scripts/setup_ns_snd.sh"
#sudo ip netns exec $NS_RCV "./scripts/setup_ns_rcv.sh"

ns_snd에서 10.0.0.5에는 ping을 보낼 수 있지만 10.0.0.6에는 ping을 보낼 수 없습니다. 무엇을 추가해야 합니까, 아니면 무엇을 추가하지 않았습니까?