SSH는 Hamachi를 사용하여 키를 복사할 수 없습니다.

SSH는 Hamachi를 사용하여 키를 복사할 수 없습니다.

NAT 및 SPI 방화벽 라우터용 솔루션으로 hamachi 네트워크 컴퓨터에서 SSH를 작동시키려고 합니다. Ping이 작동하고 ssh-copy-id가 키 추가를 거부합니다.

user@c4 ~/.ssh % ssh-copy-id -i id_rsa.pub [email protected] 
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
Ubuntu 14.04.4 LTS
Permission denied (publickey,password).

클라이언트 c4 /etc/ssh_config:

# This is the ssh client system-wide configuration file.  See
# ssh_config(5) for more information.  This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.

# Configuration data is parsed as follows:
#  1. command line options
#  2. user-specific file
#  3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.

# Site-wide defaults for some commonly used options.  For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.

Host *
#   ForwardAgent no
#   ForwardX11 no
#   ForwardX11Trusted yes
#   RhostsRSAAuthentication no
#   RSAAuthentication yes
#   PasswordAuthentication yes
#   HostbasedAuthentication no
#   GSSAPIAuthentication no
#   GSSAPIDelegateCredentials no
#   GSSAPIKeyExchange no
#   GSSAPITrustDNS no
#   BatchMode no
#   CheckHostIP yes
#   AddressFamily any
#   ConnectTimeout 0
#   StrictHostKeyChecking ask
#   IdentityFile ~/.ssh/identity
#   IdentityFile ~/.ssh/id_rsa
#   IdentityFile ~/.ssh/id_dsa
#   Port 22
#   Protocol 2,1
#   Cipher 3des
#   Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
#   MACs hmac-md5,hmac-sha1,[email protected],hmac-ripemd160
#   EscapeChar ~
#   Tunnel no
#   TunnelDevice any:any
#   PermitLocalCommand no
#   VisualHostKey no
#   ProxyCommand ssh -q -W %h:%p gateway.example.com
#   RekeyLimit 1G 1h
    SendEnv LANG LC_*
    HashKnownHosts yes
    GSSAPIAuthentication yes
    GSSAPIDelegateCredentials no
    Protocol 2
    CheckHostIP yes
    StrictHostKeyChecking ask
    ForwardX11 yes
    CompressionLevel 9
    Compression yes
    ForwardAgent yes
    UseRsh no
    FallBackToRsh no
    BatchMode yes
    UsePrivilegedPort yes
    IdentityFile ~/.ssh/id_rsa

서버 c1 /etc/ssh/sshd_config:

# Package generated configuration file
# See the sshd_config(5) manpage for details

# What ports, IPs and protocols we listen for
Port 22
# Use these options to restrict which interfaces/protocols sshd will bind to
#ListenAddress ::
ListenAddress x.x.x.x
Protocol 2
# HostKeys for protocol version 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
HostKey /etc/ssh/ssh_host_ecdsa_key
HostKey /etc/ssh/ssh_host_ed25519_key
#Privilege Separation is turned on for security
UsePrivilegeSeparation yes

# Lifetime and size of ephemeral version 1 server key
KeyRegenerationInterval 1800
ServerKeyBits 2048

# Logging
SyslogFacility AUTH
LogLevel VERBOSE 

# Authentication:
LoginGraceTime 240
PermitRootLogin no
StrictModes yes

RSAAuthentication yes
PubkeyAuthentication yes
AuthorizedKeysFile  %h/.ssh/authorized_keys

# Don't read the user's ~/.rhosts and ~/.shosts files
IgnoreRhosts yes
# For this to work you will also need host keys in /etc/ssh_known_hosts
RhostsRSAAuthentication no
# similar for protocol version 2
HostbasedAuthentication no
# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
#IgnoreUserKnownHosts yes

# To enable empty passwords, change to yes (NOT RECOMMENDED)
PermitEmptyPasswords no

# Change to yes to enable challenge-response passwords (beware issues with
# some PAM modules and threads)
ChallengeResponseAuthentication no

# Change to no to disable tunnelled clear text passwords
#PasswordAuthentication yes

# Kerberos options
#KerberosAuthentication no
#KerberosGetAFSToken no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes

#X11Forwarding yes
#X11DisplayOffset 10
PrintMotd no
PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no

#MaxStartups 10:30:60
Banner /etc/issue.net

# Allow client to pass locale environment variables
AcceptEnv LANG LC_*

Subsystem sftp /usr/lib/openssh/sftp-server

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
IgnoreUserKnownHosts yes
PasswordAuthentication yes
GatewayPorts yes
AllowTcpForwarding yes
KeepAlive yes
AllowUsers user
X11Forwarding yes
X11DisplayOffset 10
X11UseLocalhost yes

나는 이 문제를 찾기 위해 며칠을 보냈습니다. 방화벽 없이 시도했지만 성공하지 못했습니다. 내가 이것을 잘못 구성한 부분을 누구든지 볼 수 있습니까?

관련 정보