SSD에 Linux 시스템이 있고 2개의 1TB HDD가 RAID-0 어레이로 설정되어 있습니다(어떤 이유로 이름이 "Raid 0"이고 설정한 사람이 그 안에 공간을 추가하는 것을 좋아하지 않습니다). 밑줄이나 대시 대신 이름을 지정하세요.
특정 북마크에 액세스하기 위해 RAID 어레이를 클릭할 필요가 없도록 시작 후 항상 2초 후에 RAID 어레이가 마운트되도록 시작 애플리케이션을 설정했습니다. 그런데 드라이브 이름이 계속 바뀌어서 내가 만든 북마크가 의미가 없어졌습니다! 배열의 이름은 원래 "Raid 0"이었지만 나중에 "Raid 0_", "Raid 0__", 현재는 "Raid 0______"이 되었습니다. 무슨 일이야? ?
inxi -FGxxx도움이 될 경우 출력은 다음과 같습니다.
System: Host: alborz-G750JW Kernel: 3.19.0-41-generic x86_64 (64 bit gcc: 4.8.2)
Desktop: Cinnamon 2.8.6 (Gtk 3.10.8) dm: mdm Distro: Linux Mint 17.3 Rosa
Machine: Mobo: ASUSTeK model: G750JW v: 1.0 Bios: American Megatrends v: G750JW.210 date: 12/11/2013
CPU: Quad core Intel Core i7-4700HQ (-HT-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 19157
clock speeds: min/max: 800/3400 MHz 1: 2499 MHz 2: 2504 MHz 3: 3175 MHz 4: 2400 MHz 5: 2477 MHz
6: 2988 MHz 7: 2467 MHz 8: 2995 MHz
Graphics: Card: NVIDIA GK106M [GeForce GTX 765M] bus-ID: 01:00.0 chip-ID: 10de:11e2
Display Server: X.Org 1.15.1 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
Resolution: [email protected]
GLX Renderer: GeForce GTX 765M/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 361.18 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:8c20
Card-2 NVIDIA GK106 HDMI Audio Controller driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0e0b
Sound: Advanced Linux Sound Architecture v: k3.19.0-41-generic
Network: Card-1: Broadcom BCM4352 802.11ac Wireless Network Adapter
driver: wl bus-ID: 03:00.0 chip-ID: 14e4:43b1
IF: wlan0 state: up mac: 6c:71:d9:36:60:b4
Card-2: Qualcomm Atheros QCA8171 Gigabit Ethernet
driver: alx port: d000 bus-ID: 04:00.0 chip-ID: 1969:10a1
IF: eth0 state: down mac: 74:d0:2b:e9:4c:c8
Drives: HDD Total Size: 2512.5GB (9.3% used)
ID-1: /dev/sda model: ST1000LM024_HN size: 1000.2GB serial: S2Y4J9FD404111
ID-2: /dev/sdb model: ST1000LM024_HN size: 1000.2GB serial: S2Y4J9FD404103
ID-3: /dev/sdc model: Samsung_SSD_850 size: 512.1GB serial: S1SXNSAFA14082N
Partition: ID-1: / size: 110G used: 41G (39%) fs: ext4 dev: /dev/sdc6
ID-2: /home size: 92G used: 18G (20%) fs: ext4 dev: /dev/sdc7
ID-3: swap-1 size: 16.00GB used: 0.00GB (0%) fs: swap dev: /dev/sdc8
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: System Temperatures: cpu: 47.0C mobo: N/A gpu: 0.0:46C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 235 Uptime: 1:12 Memory: 1564.5/15997.8MB
Init: Upstart v: 1.12.1 runlevel: 2 default: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.111 running in gnome-terminal) inxi: 2.2.28 `