내 플랫폼: SPARC T4-1 Generic_150400-24 sun4v sparc sun4v
콘솔 cli에 있을 때 문제의 디스크가 아래의 프로브-scsi-all, c0t5000CCA07058B9F0d0의 출력에서 다른 디스크와 동일해 보이지만 디스크 1의 출력 형식이 다른 것 같습니다. 출력) 아마도 무엇이 문제일까요?
전면 패널의 디스크 LED가 다른 디스크와 마찬가지로 녹색인 것을 볼 수 있습니다.
이상하게 ZFS의 CDROM 설치 메뉴에서 Solaris 10 설치를 하면 디스크 용량도 인식이 안되고 0MB라고 나옵니다. (아래 예시를 다른 박스에서 추가했기 때문에 설치 메뉴에 디스크 이름이 은 다르다 )
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t5000CCA07058B9F0d0 <HITACHI-H109060SESUN600G-A720-558.91GB>
/scsi_vhci/disk@g5000cca07058b9f0
1. c0t5000CCA070584ED8d0 <HITACHI-H109060SESUN600G-A690 cyl 64986 alt 2 hd 27 sec 668> solaris
/scsi_vhci/disk@g5000cca070584ed8
2. c0t5000CCA070590CD8d0 <HITACHI-H109060SESUN600G-A690 cyl 64986 alt 2 hd 27 sec 668> solaris
/scsi_vhci/disk@g5000cca070590cd8
3. c0t5000CCA070590E10d0 <HITACHI-H109060SESUN600G-A690 cyl 64986 alt 2 hd 27 sec 668> solaris
/scsi_vhci/disk@g5000cca070590e10
4. c0t5000CCA0705836F8d0 <HITACHI-H109060SESUN600G-A690 cyl 64986 alt 2 hd 27 sec 668> solaris
/scsi_vhci/disk@g5000cca0705836f8
5. c0t5000CCA0705893ECd0 <HITACHI-H109060SESUN600G-A690 cyl 64986 alt 2 hd 27 sec 668> solaris
/scsi_vhci/disk@g5000cca0705893ec
6. c0t5000CCA0705955F0d0 <HITACHI-H109060SESUN600G-A690 cyl 64986 alt 2 hd 27 sec 668> solaris
/scsi_vhci/disk@g5000cca0705955f0
7. c0t5000CCA07059468Cd0 <HITACHI-H109060SESUN600G-A690 cyl 64986 alt 2 hd 27 sec 668> solaris
/scsi_vhci/disk@g5000cca07059468c
Specify disk (enter its number): ^C
{0} ok probe-scsi-all
/pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2
Unit 0 Removable Read Only device AMI Virtual CDROM 1.00
/pci@400/pci@2/pci@0/pci@4/scsi@0
FCode Version 1.00.64, MPT Version 2.00, Firmware Version 9.05.00.00
Target 9
Unit 0 Disk HITACHI H109060SESUN600G A720 1172123568 Blocks, 600 GB
SASDeviceName 5000cca07059468c SASAddress 5000cca07059468d PhyNum 0
Target a
Unit 0 Removable Read Only device TEAC DV-W28S-B AT11
SATA device PhyNum 6
Target b
Unit 0 Disk HITACHI H109060SESUN600G A720 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0705836f8 SASAddress 5000cca0705836f9 PhyNum 1
Target c
Unit 0 Disk HITACHI H109060SESUN600G A720 1172123568 Blocks, 600 GB
SASDeviceName 5000cca070584ed8 SASAddress 5000cca070584ed9 PhyNum 2
Target d
Unit 0 Disk HITACHI H109060SESUN600G A720 1172123568 Blocks, 600 GB
SASDeviceName 5000cca070590cd8 SASAddress 5000cca070590cd9 PhyNum 3
/pci@400/pci@1/pci@0/pci@4/scsi@0
FCode Version 1.00.64, MPT Version 2.00, Firmware Version 9.05.00.00
Target 9
Unit 0 Disk HITACHI H109060SESUN600G A720 1172123568 Blocks, 600 GB
SASDeviceName 5000cca07058b9f0 SASAddress 5000cca07058b9f1 PhyNum 0
Target a
Unit 0 Disk HITACHI H109060SESUN600G A720 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0705893ec SASAddress 5000cca0705893ed PhyNum 1
Target b
Unit 0 Disk HITACHI H109060SESUN600G A720 1172123568 Blocks, 600 GB
SASDeviceName 5000cca070590e10 SASAddress 5000cca070590e11 PhyNum 2
Target c
Unit 0 Disk HITACHI H109060SESUN600G A720 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0705955f0 SASAddress 5000cca0705955f1 PhyNum 3
{0} ok
─ Select Disks ─────────────────────────────────────────────────────────────────
On this screen you must select the disks for installing Solaris software.
Start by looking at the Suggested Minimum field; this value is the
approximate space needed to install the software you've selected. For ZFS,
multiple disks will be configured as mirrors, so the disk you choose, or the
slice within the disk must exceed the Suggested Minimum value.
NOTE: ** denotes current boot disk
Disk Device Available Space
=============================================================================
[X] c0t5000CCA07057269Cd0 572308 MB
) [X] c0t5000CCA070583C94d0 572308 MB
) [X] c0t5000CCA0705862A4d0 572308 MB
) [-] c0t5000CCA070588C7Cd0 0 MB
[X] c0t5000CCA07058D0A0d0 572308 MB (F4 to edit
) [ ] c0t5000CCA07058F494d0 572308 MB
[ ] c0t5000CCA070590FD0d0 572308 MB
[ ] c0t5000CCA0705940C0d0 572308 MB
답변1
출력의 디스크 0에는 format
EFI 레이블이 있는 것으로 나타납니다.
바라보다디스크 레이블 생성 및 확인.
다른 디스크의 출력을 보고 prtvtoc /dev/rdsk/c0t5000C...
차이점을 확인하세요.