Grub(debian)은 AHCI 모드에서 부팅되지 않습니다.

Grub(debian)은 AHCI 모드에서 부팅되지 않습니다.

나는 꽤 오랫동안 Debian(Acer 노트북)을 사용해 왔지만 많은 문제는 발생하지 않았습니다. 그러나 최근에 사용하기 시작했을 때 다음과 같은 메시지를 받았습니다.

No bootable device - insert boot disk and press any key

라이브 CD(xubuntu)와 함께 작동하며 하드 드라이브가 표시됩니다(라이브 CD에서 일부 백업을 만들 수 있습니다).
인터넷을 검색한 후 BIOS AHCI 모드를 IDE 모드로 전환했습니다. 작동하지만 성능이 훨씬 낮고 때로는 브라우저를 열고 파일을 복사할 때 입력/출력 오류가 발생하여 하드 리셋을 수행해야 하는 경우가 있습니다.
하드 드라이브가 손상되었거나 시스템에 문제가 있습니까?
어쩌면 도움이 될 것입니다:

dmesg | grep -iE 'err|warn|fail|fatal'
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    1.142728] ACPI: Using IOAPIC for interrupt routing
[    1.580327] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.810972] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.811037] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.811099] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.811161] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.811222] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.811285] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.811347] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.811409] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.811444] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    4.027771] ata1.01: failed to resume link (SControl 0)
[    4.035765] ata2.01: failed to resume link (SControl 0)
[   14.020286] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
[   14.020299] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[   14.020305] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[   14.020309] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB_.PCI0.GPIO) (20140424/utaddress-254)
[   14.020314] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[   14.020317] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB_.PCI0.GPIO) (20140424/utaddress-254)
[   14.068599] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   14.828072] ACPI Warning: SystemIO range 0x0000000000004000-0x000000000000401F conflicts with OpRegion 0x0000000000004000-0x000000000000400F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
[   41.539932] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.539995] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540056] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540105] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540138] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540170] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540264] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540298] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   54.063360] WARNING: CPU: 0 PID: 1905 at /build/linux-zbOcpU/linux-3.16.7-ckt25/net/wireless/sme.c:920 cfg80211_connect+0x4aa/0x4f0 [cfg80211]()
[   54.063460]  [<ffffffff810677f7>] ? warn_slowpath_common+0x77/0x90
[   54.070138] WARNING: CPU: 0 PID: 1906 at /build/linux-zbOcpU/linux-3.16.7-ckt25/net/wireless/sme.c:920 cfg80211_connect+0x4aa/0x4f0 [cfg80211]()
[   54.070290]  [<ffffffff810677f7>] ? warn_slowpath_common+0x77/0x90
[   64.094209] WARNING: CPU: 0 PID: 1903 at /build/linux-zbOcpU/linux-3.16.7-ckt25/net/wireless/sme.c:920 cfg80211_connect+0x4aa/0x4f0 [cfg80211]()
[   64.094309]  [<ffffffff810677f7>] ? warn_slowpath_common+0x77/0x90

답변1

일반적으로 Live CD는 시스템의 모든 기능을 사용하지 않고 자급자족이 가능한 소프트웨어 패키지이기 때문에 더 잘 작동합니다.

먼저 부팅 시간 매개변수를 사용하여 acpi를 끈 다음 dsdt를 확인하세요.

관련 정보