dpkg: 오류: 중복 파일로 인해 파일 이름 '/usr/lib/gio/modules' 및 패키지 'libglib2.0-0'에 대한 관심이 유발됩니다.

[askubuntu.com에서 다시 게시됨]

소프트웨어를 설치할 수 없습니다. 며칠 전 예상치 못한 정전으로 인해 발생한 것 같아요.

내가 시도할 때 sudo apt-get install gparted나는 본다

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  libpython2.7-minimal mime-support python2.7-minimal
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
  busybox-initramfs cpio dmsetup fontconfig fontconfig-config
  fonts-dejavu-core initramfs-tools initramfs-tools-bin initscripts
  klibc-utils kmod libatk1.0-0 libatk1.0-data libatkmm-1.6-1 libavahi-client3
  libavahi-common-data libavahi-common3 libcairo2 libcairomm-1.0-1
  libcgmanager0 libcups2 libdatrie1 libdbus-1-3 libdevmapper1.02.1 libexpat1
  libffi6 libfontconfig1 libfreetype6 libgcrypt11 libgdk-pixbuf2.0-0
  libgdk-pixbuf2.0-common libglib2.0-0 libglibmm-2.4-1c2a libgnutls26
  libgpg-error0 libgraphite2-3 libgssapi-krb5-2 libgtk2.0-0 libgtk2.0-common
  libgtkmm-2.4-1c2a libharfbuzz0b libjasper1 libjbig0 libjpeg-turbo8 libjpeg8
  libk5crypto3 libkeyutils1 libklibc libkmod2 libkrb5-3 libkrb5support0
  libncursesw5 libnih-dbus1 libnih1 libp11-kit0 libpango-1.0-0
  libpangocairo-1.0-0 libpangoft2-1.0-0 libpangomm-1.4-1 libparted0debian1
  libpixman-1-0 libpng12-0 libprocps3 libsigc++-2.0-0c2a libtasn1-6
  libthai-data libthai0 libtiff5 libudev1 libx11-6 libx11-data libxau6
  libxcb-render0 libxcb-shm0 libxcb1 libxcomposite1 libxcursor1 libxdamage1
  libxdmcp6 libxext6 libxfixes3 libxi6 libxinerama1 libxml2 libxrandr2
  libxrender1 module-init-tools procps shared-mime-info ucf udev
Suggested packages:
  libarchive1 xfsprogs reiserfsprogs reiser4progs jfsutils ntfs-3g dosfstools
  yelp kpartx dmraid gpart bash-completion cups-common rng-tools gnutls-bin
  krb5-doc krb5-user librsvg2-common gvfs libjasper-runtime ttf-baekmuk
  ttf-arphic-gbsn00lp ttf-arphic-bsmi00lp ttf-arphic-gkai00mp
  ttf-arphic-bkai00mp parted nparted libparted0-dev libparted0-i18n
Recommended packages:
  psmisc dbus libglib2.0-data hicolor-icon-theme libgtk2.0-bin krb5-locales
  libgpm2 xml-core
The following NEW packages will be installed
  busybox-initramfs cpio dmsetup fontconfig fontconfig-config
  fonts-dejavu-core gparted initramfs-tools initramfs-tools-bin initscripts
  klibc-utils kmod libatk1.0-0 libatk1.0-data libatkmm-1.6-1 libavahi-client3
  libavahi-common-data libavahi-common3 libcairo2 libcairomm-1.0-1
  libcgmanager0 libcups2 libdatrie1 libdbus-1-3 libdevmapper1.02.1 libexpat1
  libffi6 libfontconfig1 libfreetype6 libgcrypt11 libgdk-pixbuf2.0-0
  libgdk-pixbuf2.0-common libglib2.0-0 libglibmm-2.4-1c2a libgnutls26
  libgpg-error0 libgraphite2-3 libgssapi-krb5-2 libgtk2.0-0 libgtk2.0-common
  libgtkmm-2.4-1c2a libharfbuzz0b libjasper1 libjbig0 libjpeg-turbo8 libjpeg8
  libk5crypto3 libkeyutils1 libklibc libkmod2 libkrb5-3 libkrb5support0
  libncursesw5 libnih-dbus1 libnih1 libp11-kit0 libpango-1.0-0
  libpangocairo-1.0-0 libpangoft2-1.0-0 libpangomm-1.4-1 libparted0debian1
  libpixman-1-0 libpng12-0 libprocps3 libsigc++-2.0-0c2a libtasn1-6
  libthai-data libthai0 libtiff5 libudev1 libx11-6 libx11-data libxau6
  libxcb-render0 libxcb-shm0 libxcb1 libxcomposite1 libxcursor1 libxdamage1
  libxdmcp6 libxext6 libxfixes3 libxi6 libxinerama1 libxml2 libxrandr2
  libxrender1 module-init-tools procps shared-mime-info ucf udev
0 to upgrade, 92 to newly install, 0 to remove and 0 not to upgrade.
1 not fully installed or removed.
Need to get 0 B/14.2 MB of archives.
After this operation, 59.9 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Extract templates from packages: 100%
Preconfiguring packages ...
dpkg: error: duplicate file trigger interest for filename `/usr/lib/gio/modules' and package `libglib2.0-0'
E: Sub-process /usr/bin/dpkg returned an error code (2)

이것은 몇 가지 수정을 시도한 후 이전에 발생한 다른 오류를 제거했지만 기록하지 않았습니다.

프로그램을 사용해 봤습니다https://askubuntu.com/questions/134842/dpkg-error-duplicate-file-trigger-interest-for-filename-usr-lib-gio-modulessed그러나 나는 그것을 어떻게 사용하는지 (또는 그것이 무엇인지) 모릅니다 . 제안된 명령은 다음과 같습니다.

sed -n -e"s,/,\\\\\\\\/,g; s/:$(dpkg --print-architecture)$//p " \
      /var/lib/dpkg/triggers/File \
| while read line; do
     sudo sed -i -e"/^$line$/d" /var/lib/dpkg/triggers/File
done

이 블록을 터미널에 붙여넣거나 별도의 스크립트로 실행하면 피드백을 받지 못합니다. 터미널에서 즉시 프롬프트로 다시 보내며, gparted를 다시 설치하려고 하면 위 뉴스와 똑같은 메시지가 나타납니다. .

나는 똑바로 보려고 노력했지만 /usr/lib/gio/modules그럴 수 없었습니다 /usr/lib/gio.

나는 달리고 있어 Linux Mint 17.2 64-bit, uname -r줘3.16.0-38-generic