SFTP와 공유되는 Raspi에 폴더를 만들려고 합니다. 폴더 관리 권한과 관련하여 몇 가지 문제가 있는 것으로 보고되었습니다. 이러한 문제를 해결하려는 노력은 소용없어 보입니다. 문제를 시뮬레이션할 수 있도록 모든 것을 보고하겠습니다.
나는 /etc/ssh/sshd_config다음을 넣었습니다: 그룹은 어디에 있습니까?나스사용자 포함나스 방문
SubSystem nas internal-sftp
Match Group nas
ChrootDirectory %h
ForceCommand internal-sftp
AllowTcpForwarding no
그 다음에
sudo groupadd nas
sudo gpasswd -a nasaccess nas
그리고 루트링:
sudo chown root:nasaccess /home/nasaccess
sudo chmod 750 /home/nasaccess
그리고 내부에 폴더를 추가했습니다.
sudo mkdir /home/nasaccess/files
sudo chown nasaccess: /home/nasaccess/files
sudo chmod 750 /home/nasaccess/files
SSH 서비스를 다시 시작하고 nasaccess에 연결할 때 다음을 얻습니다.
Write failed: Broken pipe
Couldn't read packet: Connection reset by peer
소속되지 않은 사용자나스예상대로 전체 SFTP 액세스가 가능합니다. 왜? 무작위 검색으로 찾은 문제 해결 방법이 현재 작동하는 것 같습니다.
Vorbose 모드는 다음 기능을 제공합니다.
sudo sftp -vvv nasaccess@localhost
OpenSSH_6.0p1 Debian-4+deb7u2, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to localhost [127.0.0.1] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/id_rsa type -1
debug1: identity file /root/.ssh/id_rsa-cert type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: identity file /root/.ssh/id_dsa-cert type -1
debug1: identity file /root/.ssh/id_ecdsa type -1
debug1: identity file /root/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.0p1 Debia n-4+deb7u2
debug1: match: OpenSSH_6.0p1 Debian-4+deb7u2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.0p1 Debian-4+deb7u2
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "localhost" from file "/root/.ss h/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /root/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-v01@open ssh.com,[email protected],ecdsa-sha2-nistp521-cert-v01@op enssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp 521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diff ie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],ecdsa-sha2-n [email protected],[email protected],ecdsa-sha2 -nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],s [email protected],[email protected],ssh-dss-cert-v00@openss h.com,ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour12 8,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rij [email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour12 8,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rij [email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256, hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@op enssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256, hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@op enssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp 521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diff ie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour12 8,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rij [email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour12 8,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rij [email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256, hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@op enssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256, hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@op enssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA 50:ed:ea:a5:d5:7a:5a:f0:ab:09:d6:e4:e4:e9:7c:d3
debug3: load_hostkeys: loading entries for host "localhost" from file "/root/.ss h/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /root/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'localhost' is known and matches the ECDSA host key.
debug1: Found key in /root/.ssh/known_hosts:1
debug1: ssh_ecdsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/id_rsa ((nil))
debug2: key: /root/.ssh/id_dsa ((nil))
debug2: key: /root/.ssh/id_ecdsa ((nil))
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,pa ssword
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/id_rsa
debug3: no such identity: /root/.ssh/id_rsa
debug1: Trying private key: /root/.ssh/id_dsa
debug3: no such identity: /root/.ssh/id_dsa
debug1: Trying private key: /root/.ssh/id_ecdsa
debug3: no such identity: /root/.ssh/id_ecdsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
nasaccess@localhost's password:
debug3: packet_send2: adding 48 (len 63 padlen 17 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to localhost ([127.0.0.1]:22).
debug2: fd 4 setting O_NONBLOCK
debug3: fd 5 is O_NONBLOCK
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting [email protected]
debug1: Entering interactive session.
Write failed: Broken pipe
Couldn't read packet: Connection reset by peer
답변1
키워드 구문이 Subsystem잘못되었습니다. 이 시도:
Subsystem internal-sftp
Match Group nas
ChrootDirectory %h
ForceCommand internal-sftp
AllowTcpForwarding no
/var/log/auth.log서버를 살펴보면 (예, localhost귀하의 경우라는 것을 알고 있습니다) 다음과 같은 메시지가 표시됩니다.
Jul 7 22:46:24 localhost sshd[30701]: Accepted publickey for jsmith from 192.168.56.1 port 61983 ssh2: RSA 86:87:b7:08:15:5e:a4:7b:32:ba:c8:fa:84:89:45:4c
Jul 7 22:46:24 localhost sshd[30701]: pam_unix(sshd:session): session opened for user jsmith by (uid=0)
Jul 7 22:46:25 localhost sshd[30706]: subsystem request for sftp by user jsmith failed, subsystem not found
Jul 7 22:46:25 localhost sshd[30701]: pam_unix(sshd:session): session closed for user jsmith
여기서 핵심은 마지막 줄에서 두 번째입니다.사용자 jsmith의 sftp에 대한 하위 시스템 요청이 실패했습니다. 하위 시스템을 찾을 수 없습니다., 이는 하위 시스템 명령에 문제가 있음을 나타냅니다. 에서 찾고sshd_config 매뉴얼 페이지그런 다음 올바른 구문을 안내받을 수 있습니다.