USB를 통해 외부적으로 연결된 120GB SSD를 새 서버에 설치하려고 합니다. SSD에 데이터가 가득 차서 포맷할 수 없습니다.
mount /dev/sdd1 /mnt/sdd1
mount: wrong fs type, bad option, bad superblock on /dev/sdd1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
그래서
dmesg | tail
scsi 11:0:0:0: Direct-Access Crucial_ CT120M500SSD1 PQ: 0 ANSI:5
sd 11:0:0:0: Attached scsi generic sg3 type 0
sd 11:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 11:0:0:0: [sdd] Write Protect is off
sd 11:0:0:0: [sdd] Mode Sense: 28 00 00 00
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1 sdd2
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sd 11:0:0:0: [sdd] Attached SCSI disk
fstab에 드라이브를 추가해 보았습니다.
/dev/sdd1 /mnt/sdd1 ext3 defaults 0 0
작동하지 않았습니다. UUID로도 교체했습니다.
UUID=ba1d4a62-0918-46bf-8664-21cb1b7bb263 /mnt/sdd1 ext3 defaults 0 0
나는 노력했다
mount -no remount,ro /dev/sdd1
mount: /mnt/sdd1 not mounted already, or bad option
그들 중 누구도 직업이 없습니다. 모든 데이터를 검색하려면 드라이브를 마운트해야 합니다.
명령 결과를 추가했습니다.
#####file -s /dev/sdd*
/dev/sdd: x86 boot sector; GRand Unified Bootloader, stage1 version 0x3, boot drive 0x80, 1st sector stage2 0x920c9d0, GRUB version 0.94; partition 1: ID=0x83, active, starthead 32, startsector 2048, 218089472 sectors; partition 2: ID=0x82, starthead 254, startsector 218091520, 16349184 sectors, code offset 0x48
/dev/sdd1: Linux rev 1.0 ext3 filesystem data (needs journal recovery) (large files)
/dev/sdd2: Linux/i386 swap file (new style) 1 (4K pages) size 2043647 pages
Fdisk 명령
###fdisk -l /dev/sdd
Disk /dev/sdd: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0008c809
Device Boot Start End Blocks Id System
/dev/sdd1 * 1 13576 109044736 83 Linux
/dev/sdd2 13576 14594 8174592 82 Linux swap / Solaris
별도의 명령
Model: Crucial_ CT120M500SSD1 (scsi)
Disk /dev/sdd: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 112GB 112GB primary ext3 boot
2 112GB 120GB 8371MB primary linux-swap(v1)
Tune2fs 명령
tune2fs -l /dev/sdd1
tune2fs 1.41.12 (17-May-2010)Filesystem volume name: <none>
Last mounted on: <not available>
Filesystem UUID: ba1d4a62-0918-46bf-8664-21cb1b7bb263
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal ext_attr resize_inode dir_index
filetype needs_recovery sparse_super large_file
Filesystem flags: signed_directory_hash
Default mount options: user_xattr acl
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 6815744
Block count: 27261184
Reserved block count: 1363059
Free blocks: 154680
Free inodes: 5319645
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 1017
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 8192
Inode blocks per group: 512
RAID stride: 1
Filesystem created: Sun Aug 25 14:25:16 2013
Last mount time: Mon May 18 07:54:51 2015
Last write time: Sun Aug 25 14:28:29 2013
Mount count: 45
Maximum mount count: -1
Last checked: Sun Aug 25 14:25:16 2013
Check interval: 0 (<none>)
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
First inode: 11
Inode size: 256
Required extra isize: 28
Desired extra isize: 28
Journal inode: 8
First orphan inode: 1697155
Default directory hash: half_md4
Directory Hash Seed: 033f8321-306b-4dd6-8bf5-f54db8940028
Journal backup: inode blocks