어떤 사람들은 여러 IP 주소에서 내 SSH를 무차별 대입하려고 시도했습니다(작은 샘플).
May 22 19:50:02 rpi sshd[1272]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=58.218.205.84 user=root
May 22 19:50:04 rpi sshd[1272]: Failed password for root from 58.218.205.84 port 50690 ssh2
May 22 19:50:06 rpi sshd[1272]: Failed password for root from 58.218.205.84 port 50690 ssh2
May 22 19:50:08 rpi sshd[1272]: Failed password for root from 58.218.205.84 port 50690 ssh2
May 22 19:50:09 rpi sshd[1272]: Received disconnect from 58.218.205.84: 11: [preauth]
May 22 19:50:09 rpi sshd[1272]: PAM 2 more authentication failures; logname= uid=0 euid=0 tty=ssh ruser= rhost=58.218.205.84 user=root
May 22 19:50:10 rpi sshd[1276]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=58.218.205.84 user=root
May 22 19:50:13 rpi sshd[1276]: Failed password for root from 58.218.205.84 port 58560 ssh2
May 22 19:50:15 rpi sshd[1276]: Failed password for root from 58.218.205.84 port 58560 ssh2
May 22 19:50:17 rpi sshd[1276]: Failed password for root from 58.218.205.84 port 58560 ssh2
May 22 19:50:18 rpi sshd[1276]: Received disconnect from 58.218.205.84: 11: [preauth]
May 22 19:50:18 rpi sshd[1276]: PAM 2 more authentication failures; logname= uid=0 euid=0 tty=ssh ruser= rhost=58.218.205.84 user=root
May 22 19:50:24 rpi sshd[1280]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=58.218.205.84 user=root
May 22 19:50:27 rpi sshd[1280]: Failed password for root from 58.218.205.84 port 34793 ssh2
May 22 19:50:29 rpi sshd[1280]: Failed password for root from 58.218.205.84 port 34793 ssh2
May 22 19:50:31 rpi sshd[1280]: Failed password for root from 58.218.205.84 port 34793 ssh2
May 22 19:50:31 rpi sshd[1280]: Received disconnect from 58.218.205.84: 11: [preauth]
May 22 19:50:31 rpi sshd[1280]: PAM 2 more authentication failures; logname= uid=0 euid=0 tty=ssh ruser= rhost=58.218.205.84 user=root
그래서 설치했는데 fail2ban안되네요. 구성은 다음과 같습니다.
# Fail2Ban configuration file.
#
# This file was composed for Debian systems from the original one
# provided now under /usr/share/doc/fail2ban/examples/jail.conf
# for additional examples.
#
# To avoid merges during upgrades DO NOT MODIFY THIS FILE
# and rather provide your changes in /etc/fail2ban/jail.local
#
# Author: Yaroslav O. Halchenko <[email protected]>
#
# $Revision$
#
# The DEFAULT allows a global definition of the options. They can be overridden
# in each jail afterwards.
[DEFAULT]
# "ignoreip" can be an IP address, a CIDR mask or a DNS host
ignoreip = 127.0.0.1/8 192.168.1.0/24
bantime = 600
maxretry = 3
# "backend" specifies the backend used to get files modification. Available
# options are "gamin", "polling" and "auto".
# yoh: For some reason Debian shipped python-gamin didn't work as expected
# This issue left ToDo, so polling is default backend for now
backend = auto
#
# Destination email address used solely for the interpolations in
# jail.{conf,local} configuration files.
destemail = root@localhost
#
# ACTIONS
#
# Default banning action (e.g. iptables, iptables-new,
# iptables-multiport, shorewall, etc) It is used to define
# action_* variables. Can be overridden globally or per
# section within jail.local file
banaction = iptables-multiport
# email action. Since 0.8.1 upstream fail2ban uses sendmail
# MTA for the mailing. Change mta configuration parameter to mail
# if you want to revert to conventional 'mail'.
mta = sendmail
# Default protocol
protocol = tcp
# Specify chain where jumps would need to be added in iptables-* actions
chain = INPUT
#
# Action shortcuts. To be used to define action parameter
# The simplest action to take: ban only
action_ = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
# ban & send an e-mail with whois report to the destemail.
action_mw = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
%(mta)s-whois[name=%(__name__)s, dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s"]
# ban & send an e-mail with whois report and relevant log lines
# to the destemail.
action_mwl = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
%(mta)s-whois-lines[name=%(__name__)s, dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"]
# Choose default action. To change, just override value of 'action' with the
# interpolation to the chosen action shortcut (e.g. action_mw, action_mwl, etc) in jail.local
# globally (section [DEFAULT]) or per specific section
action = %(action_)s
#
# JAILS
#
# Next jails corresponds to the standard configuration in Fail2ban 0.6 which
# was shipped in Debian. Enable any defined here jail by including
#
# [SECTION_NAME]
# enabled = true
#
# in /etc/fail2ban/jail.local.
#
# Optionally you may override any other parameter (e.g. banaction,
# action, port, logpath, etc) in that section within jail.local
[ssh]
enabled = true
port = ssh
filter = sshd
logpath = /var/log/auth.log
maxretry = 6
[dropbear]
enabled = false
port = ssh
filter = sshd
logpath = /var/log/dropbear
maxretry = 6
# Generic filter for pam. Has to be used with action which bans all ports
# such as iptables-allports, shorewall
[pam-generic]
enabled = false
# pam-generic filter can be customized to monitor specific subset of 'tty's
filter = pam-generic
# port actually must be irrelevant but lets leave it all for some possible uses
port = all
banaction = iptables-allports
port = anyport
logpath = /var/log/auth.log
maxretry = 6
[xinetd-fail]
enabled = false
filter = xinetd-fail
port = all
banaction = iptables-multiport-log
logpath = /var/log/daemon.log
maxretry = 2
[ssh-ddos]
enabled = false
port = ssh
filter = sshd-ddos
logpath = /var/log/auth.log
maxretry = 6
#
# HTTP servers
#
[apache]
enabled = false
port = http,https
filter = apache-auth
logpath = /var/log/apache*/*error.log
maxretry = 6
# default action is now multiport, so apache-multiport jail was left
# for compatibility with previous (<0.7.6-2) releases
[apache-multiport]
enabled = false
port = http,https
filter = apache-auth
logpath = /var/log/apache*/*error.log
maxretry = 6
[apache-noscript]
enabled = false
port = http,https
filter = apache-noscript
logpath = /var/log/apache*/*error.log
maxretry = 6
[apache-overflows]
enabled = false
port = http,https
filter = apache-overflows
logpath = /var/log/apache*/*error.log
maxretry = 2
#
# FTP servers
#
[vsftpd]
enabled = false
port = ftp,ftp-data,ftps,ftps-data
filter = vsftpd
logpath = /var/log/vsftpd.log
# or overwrite it in jails.local to be
# logpath = /var/log/auth.log
# if you want to rely on PAM failed login attempts
# vsftpd's failregex should match both of those formats
maxretry = 6
[proftpd]
enabled = false
port = ftp,ftp-data,ftps,ftps-data
filter = proftpd
logpath = /var/log/proftpd/proftpd.log
maxretry = 6
[pure-ftpd]
enabled = false
port = ftp,ftp-data,ftps,ftps-data
filter = pure-ftpd
logpath = /var/log/auth.log
maxretry = 6
[wuftpd]
enabled = false
port = ftp,ftp-data,ftps,ftps-data
filter = wuftpd
logpath = /var/log/auth.log
maxretry = 6
#
# Mail servers
#
[postfix]
enabled = false
port = smtp,ssmtp
filter = postfix
logpath = /var/log/mail.log
[couriersmtp]
enabled = false
port = smtp,ssmtp
filter = couriersmtp
logpath = /var/log/mail.log
#
# Mail servers authenticators: might be used for smtp,ftp,imap servers, so
# all relevant ports get banned
#
[courierauth]
enabled = false
port = smtp,ssmtp,imap2,imap3,imaps,pop3,pop3s
filter = courierlogin
logpath = /var/log/mail.log
[sasl]
enabled = false
port = smtp,ssmtp,imap2,imap3,imaps,pop3,pop3s
filter = sasl
# You might consider monitoring /var/log/mail.warn instead if you are
# running postfix since it would provide the same log lines at the
# "warn" level but overall at the smaller filesize.
logpath = /var/log/mail.log
[dovecot]
enabled = false
port = smtp,ssmtp,imap2,imap3,imaps,pop3,pop3s
filter = dovecot
logpath = /var/log/mail.log
# DNS Servers
# These jails block attacks against named (bind9). By default, logging is off
# with bind9 installation. You will need something like this:
#
# logging {
# channel security_file {
# file "/var/log/named/security.log" versions 3 size 30m;
# severity dynamic;
# print-time yes;
# };
# category security {
# security_file;
# };
# };
#
# in your named.conf to provide proper logging
# !!! WARNING !!!
# Since UDP is connection-less protocol, spoofing of IP and imitation
# of illegal actions is way too simple. Thus enabling of this filter
# might provide an easy way for implementing a DoS against a chosen
# victim. See
# http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html
# Please DO NOT USE this jail unless you know what you are doing.
#[named-refused-udp]
#
#enabled = false
#port = domain,953
#protocol = udp
#filter = named-refused
#logpath = /var/log/named/security.log
[named-refused-tcp]
enabled = false
port = domain,953
protocol = tcp
filter = named-refused
logpath = /var/log/named/security.log
무시해야 하는 로컬 IP를 제외하고 내부에서는 아무것도 변경하지 않았습니다. 따라서 오늘 4000번의 로그인 시도 후에도 해당 IP는 한 번도 차단되지 않았습니다. 로그에 해당 사용자가 여전히 분당 여러 번 재시도할 수 있다는 것이 분명하게 나와 있기 때문입니다.
그래서 나는 sudo iptables -L다음과 같은 결과를 얻었습니다.
libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/3.18.7-v7+/modules.dep.bin'
iptables v1.4.14: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
잘. 또한 Fail2ban 로그를 확인하여 cat /var/log/fail2ban.log다음을 얻었습니다.
2015-05-22 12:05:43,083 fail2ban.server : INFO Changed logging target to /var/log/fail2ban.log for Fail2ban v0.8.6
2015-05-22 12:05:43,086 fail2ban.jail : INFO Creating new jail 'ssh'
2015-05-22 12:05:43,088 fail2ban.jail : INFO Jail 'ssh' uses poller
2015-05-22 12:05:43,166 fail2ban.filter : INFO Added logfile = /var/log/auth.log
2015-05-22 12:05:43,169 fail2ban.filter : INFO Set maxRetry = 6
2015-05-22 12:05:43,173 fail2ban.filter : INFO Set findtime = 600
2015-05-22 12:05:43,176 fail2ban.actions: INFO Set banTime = 600
2015-05-22 12:05:43,385 fail2ban.jail : INFO Jail 'ssh' started
2015-05-22 12:05:43,467 fail2ban.actions.action: ERROR iptables -N fail2ban-ssh
iptables -A fail2ban-ssh -j RETURN
iptables -I INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh returned 300
2015-05-22 19:42:34,799 fail2ban.server : INFO Stopping all jails
2015-05-22 19:42:35,753 fail2ban.actions.action: ERROR iptables -D INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh
iptables -F fail2ban-ssh
iptables -X fail2ban-ssh returned 300
2015-05-22 19:42:35,754 fail2ban.jail : INFO Jail 'ssh' stopped
2015-05-22 19:42:35,763 fail2ban.server : INFO Exiting Fail2ban
2015-05-22 19:42:37,686 fail2ban.server : INFO Changed logging target to /var/log/fail2ban.log for Fail2ban v0.8.6
2015-05-22 19:42:37,689 fail2ban.jail : INFO Creating new jail 'ssh'
2015-05-22 19:42:37,695 fail2ban.jail : INFO Jail 'ssh' uses Gamin
2015-05-22 19:42:37,824 fail2ban.filter : INFO Added logfile = /var/log/auth.log
2015-05-22 19:42:37,827 fail2ban.filter : INFO Set maxRetry = 6
2015-05-22 19:42:37,834 fail2ban.filter : INFO Set findtime = 600
2015-05-22 19:42:37,837 fail2ban.actions: INFO Set banTime = 600
2015-05-22 19:42:38,053 fail2ban.jail : INFO Jail 'ssh' started
2015-05-22 19:42:38,126 fail2ban.actions.action: ERROR iptables -N fail2ban-ssh
iptables -A fail2ban-ssh -j RETURN
iptables -I INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh returned 300
fail2ban-regex저도 확인해 auth.log보니 4000개가 넘는 일치 항목이 있다고 하더군요.
무슨 일이에요, raspian에서 iptables가 깨졌나요? 어떻게 고치나요?
답변1
해결 방법을 찾았습니다. 다음을 수행하세요.
sudo rpi-update
펌웨어, 커널 버전 및 작동에 필요한 기타 사항을 업데이트했으며 iptables이제 fail2ban모든 것이 잘 작동합니다.