HDD를 연결할 수 없습니다/시스템이 HDD를 읽을 수 없습니다. dmesg 출력이 무엇을 의미하는지 잘 모르겠습니다`

오래된 Windows 노트북에서 제거한 하드 드라이브가 있는데 보관하고 싶은 정보가 전혀 없는 것 같습니다. ext4 등으로 포맷할 계획입니다.

어제 연결하여 뭔가를 하려고 했을 때 파일 시스템이 깨끗하지 않다는 오류 메시지를 받았습니다.

실행하면 fdisk -l멈춰서 터미널을 닫아야 합니다.

dmesg의 출력을 텍스트 파일에 기록했지만 어떤 문제가 나열되는지 모르겠습니다.

출력 링크입니다너무 길어서 여기에 붙여넣을 수 없습니다.

이는 기사를 더욱 독립적으로 만들거나 출력에 무엇이 포함되는지에 대한 아이디어를 제공하기 위해 발췌한 것입니다. 누구든지 도움이 된다면 좋을 것 같아요, 건배

[137892.604695] wlan0: associated
[137897.517506] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[137897.517818] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[147331.327969] usb 3-2: new high-speed USB device number 14 using xhci_hcd
[147331.352116] usb 3-2: New USB device found, idVendor=1631, idProduct=3200
[147331.352126] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147331.352131] usb 3-2: Product: VLI Product String
[147331.352136] usb 3-2: Manufacturer: VLI manufacture String
[147331.352140] usb 3-2: SerialNumber: 0000000000006283
[147331.353130] usb-storage 3-2:1.0: USB Mass Storage device detected
[147331.353335] scsi9 : usb-storage 3-2:1.0
[147332.340647] usb 4-2: Device not responding to set address.
[147332.548313] usb 4-2: Device not responding to set address.
[147332.749069] usb 4-2: device not accepting address 5, error -71
[147333.530241] usb 4-2: new SuperSpeed USB device number 6 using xhci_hcd
[147333.554400] usb 4-2: New USB device found, idVendor=1631, idProduct=3200
[147333.554412] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147333.554417] usb 4-2: Product: VLI Product String
[147333.554422] usb 4-2: Manufacturer: VLI manufacture String
[147333.554426] usb 4-2: SerialNumber: 0000000000006283
[147333.556163] usb-storage 4-2:1.0: USB Mass Storage device detected
[147333.556436] scsi10 : usb-storage 4-2:1.0
[147333.557216] usb 3-2: USB disconnect, device number 14
[147335.029094] scsi 10:0:0:0: Direct-Access     Hitachi  HTS547575A9E     JE4O PQ: 0 ANSI: 2
[147335.029374] sd 10:0:0:0: Attached scsi generic sg3 type 0
[147335.032836] sd 10:0:0:0: [sdc] 1465149165 512-byte logical blocks: (750 GB/698 GiB)
[147335.033330] sd 10:0:0:0: [sdc] Write Protect is off
[147335.033333] sd 10:0:0:0: [sdc] Mode Sense: 03 00 00 00
[147335.033829] sd 10:0:0:0: [sdc] No Caching mode page found
[147335.033832] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[147335.038517] sd 10:0:0:0: [sdc] No Caching mode page found
[147335.038520] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[147335.102150]  sdc: sdc1 sdc2 < sdc5 sdc6 >
[147335.121804] sd 10:0:0:0: [sdc] No Caching mode page found
[147335.121809] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[147335.121812] sd 10:0:0:0: [sdc] Attached SCSI disk
[147602.815372] usb 4-2: USB disconnect, device number 6
[147632.555007] usb 3-2: new high-speed USB device number 15 using xhci_hcd
[147632.579109] usb 3-2: New USB device found, idVendor=1631, idProduct=3200
[147632.579119] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147632.579125] usb 3-2: Product: VLI Product String
[147632.579129] usb 3-2: Manufacturer: VLI manufacture String
[147632.579134] usb 3-2: SerialNumber: 0000000000006283
[147632.580093] usb-storage 3-2:1.0: USB Mass Storage device detected
[147632.580298] scsi11 : usb-storage 3-2:1.0
[147633.575692] usb 4-2: Device not responding to set address.
[147633.783359] usb 4-2: Device not responding to set address.
[147633.984083] usb 4-2: device not accepting address 7, error -71
[147634.765262] usb 4-2: new SuperSpeed USB device number 8 using xhci_hcd
[147634.789376] usb 4-2: New USB device found, idVendor=1631, idProduct=3200
[147634.789386] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147634.789392] usb 4-2: Product: VLI Product String
[147634.789397] usb 4-2: Manufacturer: VLI manufacture String
[147634.789401] usb 4-2: SerialNumber: 0000000000006283
[147634.790854] usb-storage 4-2:1.0: USB Mass Storage device detected
[147634.791120] scsi12 : usb-storage 4-2:1.0
[147634.791635] usb 3-2: USB disconnect, device number 15
[147656.494733] usb 4-2: reset SuperSpeed USB device number 8 using xhci_hcd
[147656.511562] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e00
[147656.511566] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e40
[147656.626851] usb 4-2: reset SuperSpeed USB device number 8 using xhci_hcd
[147656.643599] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e00
[147656.643602] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e40
[147662.763786] usb 4-2: reset SuperSpeed USB device number 8 using xhci_hcd
[147662.780621] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e00
[147662.780625] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e40
[147662.891897] usb 4-2: reset SuperSpeed USB device number 8 using xhci_hcd
[147662.908702] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e00
[147662.908705] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e40
[147663.024010] usb 4-2: reset SuperSpeed USB device number 8 using xhci_hcd
[147663.040807] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e00
[147663.040811] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e40
[147663.041710] scsi 12:0:0:0: Device offlined - not ready after error recovery
[147751.783571] usb 4-2: USB disconnect, device number 8
[147768.504680] usb 3-2: new high-speed USB device number 16 using xhci_hcd
[147768.528775] usb 3-2: New USB device found, idVendor=1631, idProduct=3200
[147768.528786] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147768.528791] usb 3-2: Product: VLI Product String
[147768.528796] usb 3-2: Manufacturer: VLI manufacture String
[147768.528800] usb 3-2: SerialNumber: 0000000000006283
[147768.529776] usb-storage 3-2:1.0: USB Mass Storage device detected
[147768.530051] scsi13 : usb-storage 3-2:1.0
[147769.525243] usb 4-2: Device not responding to set address.
[147769.728880] usb 4-2: Device not responding to set address.
[147769.929750] usb 4-2: device not accepting address 9, error -71
[147770.710935] usb 4-2: new SuperSpeed USB device number 10 using xhci_hcd
[147770.734206] usb 4-2: New USB device found, idVendor=1631, idProduct=3200
[147770.734208] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147770.734209] usb 4-2: Product: VLI Product String
[147770.734210] usb 4-2: Manufacturer: VLI manufacture String
[147770.734211] usb 4-2: SerialNumber: 0000000000006283
[147770.735356] usb-storage 4-2:1.0: USB Mass Storage device detected
[147770.735492] scsi14 : usb-storage 4-2:1.0
[147770.735896] usb 3-2: USB disconnect, device number 16
[147772.975132] scsi 14:0:0:0: Direct-Access     WDC WD32 00BEVT-75A23     01.0 PQ: 0 ANSI: 2
[147772.975725] sd 14:0:0:0: Attached scsi generic sg3 type 0 

---

편집 - USB 드라이브를 연결하지 않고 dmesg를 다시 실행했는데, 연결 직후에 한 번, 연결 후 몇 초 후에 한 번, 두 번 실행했습니다.

첫 번째 메시지

두 번째 메시지

---

편집 2

일반 포트 대신 SuperSpeed ​​​​포트를 사용했는데, 확실히 원활하게 작동하는 것 같습니다.

USB 포트가 4개 있는데 어느 것이 속도인지 잘 모르겠습니다(색상은 지정되지 않음).

첫 번째 테스트는 포트 1을 사용하여 수행되었습니다. 이제 다른 포트를 테스트하겠습니다. 이를 테스트하기 위해 방금 사용했습니다.어댑터그런 다음 다음을 실행하십시오 dmesg > hdd.txt.

포트 2

포트 3

포트 4

참고로(내 노트북을 볼 때 어떤 포트가 무엇인지):

port 2  | port 4
--------------------
port 1  | port 3