gmp 5.0.5 mpfr 3.1.1 오류가 있는 gcc 4.6.3 로컬 설치

나도 액세스할 수 있는 서버의 홈 디렉터리에 새 gcc 버전(g++ 버전)을 설치하려고 합니다. 서버에는 이미 다른 곳에 gcc(및 gmp 등)가 있지만 이전 버전에서는 그럴 것 같습니다.현지의새로운 것을 설치하십시오.

나는 팔로우한다이 가이드엄밀히 말하면 내 홈 디렉토리에서 작업합니다. 어쨌든 새 tar(gcc, gmp, mpfr, mpc)를 다운로드하고 압축을 풀고 gmp, mpfr, mpc를 gcc의 소스 디렉터리로 옮겼습니다(이름이 gmp, mpfr, 다음 으로 지정되었는지 확인 mpc). 그런 다음 cd ..소스 코드를 종료하고 빌드 디렉터리( objdir)로 이동하여 거기에서 구성을 실행했습니다. 구성은 문제 없이 진행되지만 "make"는 결국 다음을 반환합니다.

checking for MPFR... yes
checking for recent GMP... yes
checking for recent MPFR... no
configure: error: MPFR version >= 2.4.2 required
make[2]: *** [configure-stage1-mpc] Error 1
make[2]: Leaving directory `/home/myusername/gcc-temp/objdir'
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory `/home/myusername/gcc-temp/objdir'
make: *** [all] Error 2

정말 버전 2.4.2여야 합니까? 이것이 문제인가요?

gcc 등이 다른 곳에 설치되었다는 사실이 문제를 일으키나요? LD_LIBRARY_PATH=""다른 곳을 보지 못하게 하는 등 몇 가지 조치를 취했지만 소용이 없었습니다. 나는 gmp를 사용하는 데 아무런 문제가 없는 것 같기 때문에 gcc 소스 디렉토리에서 mpfr을 사용하는 것이 좋을 것이라고 생각했을 것입니다.

완벽한 config.log:

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by configure, which was
generated by GNU Autoconf 2.64.  Invocation command line was

  $ /home/myusername/gcc-temp/gcc-4.6.3/configure --prefix=/home/myusername/opt/gcc-4.6.3 --with-local-prefix=/home/myusername/usr/local

## --------- ##
## Platform. ##
## --------- ##

hostname = erased
uname -m = x86_64
uname -r = 2.6.18-308.1.1.el5
uname -s = Linux
uname -v = #1 SMP Fri Feb 17 16:51:01 EST 2012

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = x86_64
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /opt/streamline/bin
PATH: /opt/streamline/sbin
PATH: /software/bin
PATH: /usr/kerberos/bin
PATH: /opt/intel/Compiler/11.1/bin/intel64/
PATH: /opt/absoft/bin
PATH: /opt/pgi//linux86-64/9.0/bin
PATH: /usr/local/bin
PATH: /bin
PATH: /usr/bin
PATH: /opt/pathscale/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2222: checking build system type
configure:2236: result: x86_64-unknown-linux-gnu
configure:2283: checking host system type
configure:2296: result: x86_64-unknown-linux-gnu
configure:2316: checking target system type
configure:2329: result: x86_64-unknown-linux-gnu
configure:2383: checking for a BSD-compatible install
configure:2451: result: /usr/bin/install -c
configure:2462: checking whether ln works
configure:2484: result: yes
configure:2488: checking whether ln -s works
configure:2492: result: yes
configure:2499: checking for a sed that does not truncate output
configure:2563: result: /bin/sed
configure:2572: checking for gawk
configure:2588: found /bin/gawk
configure:2599: result: gawk
configure:3913: checking for gcc
configure:3929: found /usr/bin/gcc
configure:3940: result: gcc
configure:4169: checking for C compiler version
configure:4178: gcc --version >&5
gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:4189: $? = 0
configure:4178: gcc -v >&5
Using built-in specs.
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --disable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux
Thread model: posix
gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)
configure:4189: $? = 0
configure:4178: gcc -V >&5
gcc: '-V' option must have argument
configure:4189: $? = 1
configure:4178: gcc -qversion >&5
gcc: unrecognized option '-qversion'
gcc: no input files
configure:4189: $? = 1
configure:4209: checking for C compiler default output file name
configure:4231: gcc    conftest.c  >&5
configure:4235: $? = 0
configure:4272: result: a.out
configure:4288: checking whether the C compiler works
configure:4297: ./a.out
configure:4301: $? = 0
configure:4316: result: yes
configure:4323: checking whether we are cross compiling
configure:4325: result: no
configure:4328: checking for suffix of executables
configure:4335: gcc -o conftest    conftest.c  >&5
configure:4339: $? = 0
configure:4361: result: 
configure:4367: checking for suffix of object files
configure:4389: gcc -c   conftest.c >&5
configure:4393: $? = 0
configure:4414: result: o
configure:4418: checking whether we are using the GNU C compiler
configure:4437: gcc -c   conftest.c >&5
configure:4437: $? = 0
configure:4446: result: yes
configure:4455: checking whether gcc accepts -g
configure:4475: gcc -c -g  conftest.c >&5
configure:4475: $? = 0
configure:4516: result: yes
configure:4533: checking for gcc option to accept ISO C89
configure:4597: gcc  -c -g -O2  conftest.c >&5
configure:4597: $? = 0
configure:4610: result: none needed
configure:4688: checking for g++
configure:4704: found /usr/bin/g++
configure:4715: result: g++
configure:4742: checking for C++ compiler version
configure:4751: g++ --version >&5
g++ (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:4762: $? = 0
configure:4751: g++ -v >&5
Using built-in specs.
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --disable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux
Thread model: posix
gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)
configure:4762: $? = 0
configure:4751: g++ -V >&5
g++: '-V' option must have argument
configure:4762: $? = 1
configure:4751: g++ -qversion >&5
g++: unrecognized option '-qversion'
g++: no input files
configure:4762: $? = 1
configure:4766: checking whether we are using the GNU C++ compiler
configure:4785: g++ -c   conftest.cpp >&5
configure:4785: $? = 0
configure:4794: result: yes
configure:4803: checking whether g++ accepts -g
configure:4823: g++ -c -g  conftest.cpp >&5
configure:4823: $? = 0
configure:4864: result: yes
configure:4953: checking for gnatbind
configure:4983: result: no
configure:5045: checking for gnatmake
configure:5075: result: no
configure:5094: checking whether compiler driver understands Ada
configure:5117: result: no
configure:5126: checking how to compare bootstrapped objects
configure:5151: result: cmp --ignore-initial=16 $$f1 $$f2
configure:5167: checking for objdir
configure:5182: result: .libs
configure:5724: checking for PWL_handle_timeout in -lpwl
configure:5749: gcc -o conftest -g -O2    conftest.c -lpwl   >&5
/usr/bin/ld: cannot find -lpwl
collect2: ld returned 1 exit status
configure:5749: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| 
| /* Override any GCC internal prototype to avoid an error.
|    Use char because int might match the return type of a GCC
|    builtin and then its argument prototype would still apply.  */
| #ifdef __cplusplus
| extern "C"
| #endif
| char PWL_handle_timeout ();
| int
| main ()
| {
| return PWL_handle_timeout ();
|   ;
|   return 0;
| }
configure:5758: result: no
configure:5772: checking for version 0.11 (revision 0 or later) of PPL
configure:5789: gcc -c -g -O2  -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr -I$$s/mpc/src   conftest.c >&5
conftest.c:10:19: error: ppl_c.h: No such file or directory
conftest.c: In function 'main':
conftest.c:16: error: 'choke' undeclared (first use in this function)
conftest.c:16: error: (Each undeclared identifier is reported only once
conftest.c:16: error: for each function it appears in.)
conftest.c:16: error: expected ';' before 'me'
configure:5789: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| #include "ppl_c.h"
| int
| main ()
| {
| 
|     #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
|     choke me
|     #endif
| 
|   ;
|   return 0;
| }
configure:5793: result: no
configure:7214: checking for default BUILD_CONFIG
configure:7246: result: bootstrap-debug
configure:7736: checking for bison
configure:7752: found /usr/bin/bison
configure:7763: result: bison -y
configure:7784: checking for bison
configure:7800: found /usr/bin/bison
configure:7811: result: bison
configure:7831: checking for gm4
configure:7861: result: no
configure:7831: checking for gnum4
configure:7861: result: no
configure:7831: checking for m4
configure:7847: found /usr/bin/m4
configure:7858: result: m4
configure:7878: checking for flex
configure:7894: found /usr/bin/flex
configure:7905: result: flex
configure:7926: checking for flex
configure:7942: found /usr/bin/flex
configure:7953: result: flex
configure:7973: checking for makeinfo
configure:7989: found /usr/bin/makeinfo
configure:8000: result: makeinfo
configure:8034: checking for expect
configure:8064: result: no
configure:8083: checking for runtest
configure:8113: result: no
configure:8228: checking for ar
configure:8244: found /usr/bin/ar
configure:8255: result: ar
configure:8369: checking for as
configure:8385: found /usr/bin/as
configure:8396: result: as
configure:8510: checking for dlltool
configure:8540: result: no
configure:8651: checking for ld
configure:8667: found /usr/bin/ld
configure:8678: result: ld
configure:8792: checking for lipo
configure:8822: result: no
configure:8933: checking for nm
configure:8949: found /usr/bin/nm
configure:8960: result: nm
configure:9074: checking for ranlib
configure:9090: found /usr/bin/ranlib
configure:9101: result: ranlib
configure:9210: checking for strip
configure:9226: found /usr/bin/strip
configure:9237: result: strip
configure:9346: checking for windres
configure:9376: result: no
configure:9487: checking for windmc
configure:9517: result: no
configure:9628: checking for objcopy
configure:9644: found /usr/bin/objcopy
configure:9655: result: objcopy
configure:9769: checking for objdump
configure:9785: found /usr/bin/objdump
configure:9796: result: objdump
configure:9949: checking for cc
configure:9965: found /usr/bin/cc
configure:9976: result: cc
configure:10110: checking for c++
configure:10126: found /usr/bin/c++
configure:10137: result: c++
configure:10271: checking for gcc
configure:10287: found /usr/bin/gcc
configure:10298: result: gcc
configure:10427: checking for gcj
configure:10443: found /usr/bin/gcj
configure:10454: result: gcj
configure:10588: checking for gfortran
configure:10604: found /usr/bin/gfortran
configure:10615: result: gfortran
configure:10749: checking for gccgo
configure:10779: result: no
configure:10840: checking for ar
configure:10873: result: no
configure:10990: checking for ar
configure:11006: found /usr/bin/ar
configure:11017: result: ar
configure:11070: checking for as
configure:11103: result: no
configure:11220: checking for as
configure:11236: found /usr/bin/as
configure:11247: result: as
configure:11300: checking for dlltool
configure:11333: result: no
configure:11450: checking for dlltool
configure:11480: result: no
configure:11530: checking for ld
configure:11563: result: no
configure:11680: checking for ld
configure:11696: found /usr/bin/ld
configure:11707: result: ld
configure:11760: checking for lipo
configure:11793: result: no
configure:11910: checking for lipo
configure:11940: result: no
configure:11990: checking for nm
configure:12023: result: no
configure:12140: checking for nm
configure:12156: found /usr/bin/nm
configure:12167: result: nm
configure:12220: checking for objdump
configure:12253: result: no
configure:12370: checking for objdump
configure:12386: found /usr/bin/objdump
configure:12397: result: objdump
configure:12450: checking for ranlib
configure:12483: result: no
configure:12600: checking for ranlib
configure:12616: found /usr/bin/ranlib
configure:12627: result: ranlib
configure:12680: checking for strip
configure:12713: result: no
configure:12830: checking for strip
configure:12846: found /usr/bin/strip
configure:12857: result: strip
configure:12910: checking for windres
configure:12943: result: no
configure:13060: checking for windres
configure:13090: result: no
configure:13140: checking for windmc
configure:13173: result: no
configure:13290: checking for windmc
configure:13320: result: no
configure:13348: checking where to find the target ar
configure:13381: result: host tool
configure:13390: checking where to find the target as
configure:13423: result: host tool
configure:13432: checking where to find the target cc
configure:13455: result: just compiled
configure:13474: checking where to find the target c++
configure:13500: result: just compiled
configure:13519: checking where to find the target c++ for libstdc++
configure:13545: result: just compiled
configure:13564: checking where to find the target dlltool
configure:13597: result: host tool
configure:13606: checking where to find the target gcc
configure:13629: result: just compiled
configure:13648: checking where to find the target gcj
configure:13674: result: just compiled
configure:13693: checking where to find the target gfortran
configure:13719: result: just compiled
configure:13738: checking where to find the target gccgo
configure:13774: result: host tool
configure:13783: checking where to find the target ld
configure:13816: result: host tool
configure:13825: checking where to find the target lipo
configure:13847: result: host tool
configure:13856: checking where to find the target nm
configure:13889: result: host tool
configure:13898: checking where to find the target objdump
configure:13931: result: host tool
configure:13940: checking where to find the target ranlib
configure:13973: result: host tool
configure:13982: checking where to find the target strip
configure:14015: result: host tool
configure:14024: checking where to find the target windres
configure:14057: result: host tool
configure:14066: checking where to find the target windmc
configure:14099: result: host tool
configure:14136: checking whether to enable maintainer-specific portions of Makefiles
configure:14145: result: no
configure:14178: checking whether -fkeep-inline-functions is supported
configure:14197: gcc -c -g -O2 -fkeep-inline-functions  conftest.c >&5
configure:14197: $? = 0
configure:14198: result: yes
configure:14395: creating ./config.status

## ---------------------- ##
## Running config.status. ##
## ---------------------- ##

This file was extended by config.status, which was
generated by GNU Autoconf 2.64.  Invocation command line was

  CONFIG_FILES    = 
  CONFIG_HEADERS  = 
  CONFIG_LINKS    = 
  CONFIG_COMMANDS = 
  $ ./config.status 

on lin04.hpc.nottingham.ac.uk

config.status:996: creating Makefile

## ---------------- ##
## Cache variables. ##
## ---------------- ##

#### ---snip---
#### (cut ac_cv_xxx variables so that the log would fit in the post)

acx_cv_cc_gcc_supports_ada=no
acx_cv_prog_LN=ln
gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
gcc_cv_tool_dirs=/home/myusername/opt/gcc-4.6.3/libexec/gcc/x86_64-unknown-linux-gnu/4.6.3:/home/myusername/opt/gcc-4.6.3/libexec/gcc/x86_64-unknown-linux-gnu:/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.3:/usr/lib/gcc/x86_64-unknown-linux-gnu:/home/myusername/opt/gcc-4.6.3/x86_64-unknown-linux-gnu/bin/x86_64-unknown-linux-gnu/4.6.3:/home/myusername/opt/gcc-4.6.3/x86_64-unknown-linux-gnu/bin:
gcc_cv_tool_prefix=/home/myusername/opt/gcc-4.6.3
lt_cv_objdir=.libs

## ----------------- ##
## Output variables. ##
## ----------------- ##

AR='ar'
AR_FOR_BUILD='$(AR)'
AR_FOR_TARGET='$(AR)'
AS='as'
AS_FOR_BUILD='$(AS)'
AS_FOR_TARGET='$(AS)'
AWK='gawk'
BISON='bison'
BUILD_CONFIG='bootstrap-debug'
CC='gcc'
CC_FOR_BUILD='$(CC)'
CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
CFLAGS='-g -O2'
CFLAGS_FOR_BUILD='-g -O2'
CFLAGS_FOR_TARGET='-g -O2'
COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'
CONFIGURE_GDB_TK=''
CPPFLAGS=''
CXX='g++'
CXXFLAGS='-g -O2'
CXXFLAGS_FOR_BUILD='-g -O2'
CXXFLAGS_FOR_TARGET='-g -O2'
CXX_FOR_BUILD='$(CXX)'
CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
DEBUG_PREFIX_CFLAGS_FOR_TARGET=''
DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"'
DLLTOOL='dlltool'
DLLTOOL_FOR_BUILD='$(DLLTOOL)'
DLLTOOL_FOR_TARGET='$(DLLTOOL)'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EXEEXT=''
EXPECT='expect'
FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
FLEX='flex'
GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
GCC_SHLIB_SUBDIR=''
GCJ_FOR_BUILD='$(GCJ)'
GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
GDB_TK=''
GFORTRAN_FOR_BUILD='$(GFORTRAN)'
GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
GNATBIND='no'
GNATMAKE='no'
GOC_FOR_BUILD='$(GOC)'
GOC_FOR_TARGET='$(GOC)'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_GDB_TK=''
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
LD='ld'
LDFLAGS=''
LDFLAGS_FOR_BUILD=''
LD_FOR_BUILD='$(LD)'
LD_FOR_TARGET='$(LD)'
LEX='flex'
LIBOBJS=''
LIBS=''
LIPO='lipo'
LIPO_FOR_TARGET='$(LIPO)'
LN='ln'
LN_S='ln -s'
LTLIBOBJS=''
M4='m4'
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='makeinfo'
NM='nm'
NM_FOR_BUILD='$(NM)'
NM_FOR_TARGET='$(NM)'
OBJCOPY='objcopy'
OBJDUMP='objdump'
OBJDUMP_FOR_TARGET='$(OBJDUMP)'
OBJEXT='o'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_URL=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
RANLIB='ranlib'
RANLIB_FOR_BUILD='$(RANLIB)'
RANLIB_FOR_TARGET='$(RANLIB)'
RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
RPATH_ENVVAR='LD_LIBRARY_PATH'
RUNTEST='runtest'
SED='/bin/sed'
SHELL='/bin/sh'
STRIP='strip'
STRIP_FOR_TARGET='$(STRIP)'
SYSROOT_CFLAGS_FOR_TARGET=''
TOPLEVEL_CONFIGURE_ARGUMENTS='/home/myusername/gcc-temp/gcc-4.6.3/configure --prefix=/home/myusername/opt/gcc-4.6.3 --with-local-prefix=/home/myusername/usr/local'
WINDMC='windmc'
WINDMC_FOR_BUILD='$(WINDMC)'
WINDMC_FOR_TARGET='$(WINDMC)'
WINDRES='windres'
WINDRES_FOR_BUILD='$(WINDRES)'
WINDRES_FOR_TARGET='$(WINDRES)'
YACC='bison -y'
ac_ct_CC='gcc'
ac_ct_CXX='g++'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_configargs=' --cache-file=../config.cache '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking'
build_configdirs=' libiberty fixincludes'
build_cpu='x86_64'
build_libsubdir='build-x86_64-unknown-linux-gnu'
build_noncanonical='x86_64-unknown-linux-gnu'
build_os='linux-gnu'
build_subdir='build-x86_64-unknown-linux-gnu'
build_tooldir='${exec_prefix}/x86_64-unknown-linux-gnu'
build_vendor='unknown'
clooginc=''
clooglibs=''
compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*'
config_shell='/bin/sh'
configdirs=' intl libiberty zlib libcpp libdecnumber gmp mpfr mpc fixincludes gcc lto-plugin'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
do_compare='cmp --ignore-initial=16 $$f1 $$f2'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='${prefix}'
extra_host_libiberty_configure_flags='--enable-shared'
extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs'
extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/.libs'
extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs'
gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr -I$$s/mpc/src '
gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L$$r/$(HOST_SUBDIR)/mpfr/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_configargs=' --cache-file=./config.cache  '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking'
host_cpu='x86_64'
host_noncanonical='x86_64-unknown-linux-gnu'
host_os='linux-gnu'
host_subdir='.'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
poststage1_ldflags='-static-libstdc++ -static-libgcc'
poststage1_libs=''
pplinc=''
ppllibs=''
prefix='/home/myusername/opt/gcc-4.6.3'
program_transform_name='s,y,y,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
stage1_cflags='-g -fkeep-inline-functions'
stage1_checking='--enable-checking=yes,types'
stage1_languages='c,lto'
stage1_ldflags=''
stage1_libs=''
stage2_werror_flag=''
sysconfdir='${prefix}/etc'
target='x86_64-unknown-linux-gnu'
target_alias=''
target_configargs='--cache-file=./config.cache --enable-multilib   '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking'
target_configdirs=' libgcc libgomp libstdc++-v3 libmudflap libssp libquadmath libgfortran boehm-gc libffi zlib libjava libobjc'
target_cpu='x86_64'
target_noncanonical='x86_64-unknown-linux-gnu'
target_os='linux-gnu'
target_subdir='x86_64-unknown-linux-gnu'
target_vendor='unknown'
tooldir='${exec_prefix}/x86_64-unknown-linux-gnu'

## ------------------- ##
## File substitutions. ##
## ------------------- ##

alphaieee_frag='/dev/null'
host_makefile_frag='/dev/null'
ospace_frag='/dev/null'
serialization_dependencies='serdep.tmp'
target_makefile_frag='/home/myusername/gcc-temp/gcc-4.6.3/config/mt-gnu'

## ----------- ##
## confdefs.h. ##
## ----------- ##

/* confdefs.h */
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
#define LT_OBJDIR ".libs/"

configure: exit 0