내 전동 공구에 대한 매뉴얼 페이지 항목을 어떻게 추가합니까?

나는 사용하여 발견했다펄 포드매뉴얼 페이지를 직접 작성하는 것보다 훨씬 쉽게 이 pod2man유틸리티(기본 Perl 패키지의 일부)를 사용하여 POD 파일에서 매뉴얼 페이지를 만들 수 있습니다. 일부 실행 파일은 이미 Perl로 작성되었으므로 POD 형식을 스크립트에 직접 추가하면 POD 파일로 직접 변환됩니다. POD가 단순하기 때문에 코드가 다른 언어로 작성되었음에도 불구하고 POD 형식을 사용하는 여러 프로젝트도 보았습니다.

매뉴얼 페이지에 대한 추가 디렉토리를 추가하려면 $MANPATH환경 변수를 설정할 수 있습니다. $MANPATH앞에 접두사를 붙이면 :구성된 man 경로 목록에 추가됩니다. manpath현재 정의된 man 경로를 보려면 이 명령을 사용하십시오 .

노력하다pandoc– 확장 기능을 사용합니다.가격 인하배운 구문스택 오버플로.

여기예는 다음과 같습니다매뉴얼 페이지:

% PANDOC(1) Pandoc User Manuals
% John MacFarlane
% January 8, 2008

# NAME

pandoc - general markup converter

# SYNOPSIS

pandoc [*options*] [*input-file*]...

# DESCRIPTION

Pandoc converts files from one markup format to another. It can
read markdown and (subsets of) reStructuredText, HTML, and LaTeX, and
it can write plain text, markdown, reStructuredText, HTML, LaTeX,
ConTeXt, Texinfo, groff man, MediaWiki markup, RTF, OpenDocument XML,
ODT, DocBook XML, EPUB, and Slidy or S5 HTML slide shows.

If no *input-file* is specified, input is read from *stdin*.
Otherwise, the *input-files* are concatenated (with a blank
line between each) and used as input.  Output goes to *stdout* by
default (though output to *stdout* is disabled for the `odt` and
`epub` output formats).  For output to a file, use the `-o` option:

    pandoc -o output.html input.txt

Instead of a file, an absolute URI may be given.  In this case
pandoc will fetch the content using HTTP:

    pandoc -f html -t markdown http://www.fsf.org

The input and output formats may be specified using command-line options
(see **OPTIONS**, below, for details).  If these formats are not
specified explicitly, Pandoc will attempt to determine them
from the extensions of the input and output filenames.  If input comes
from *stdin* or from a file with an unknown extension, the input is assumed
to be markdown.  If no output filename is specified using the `-o`
option, or if a filename is specified but its extension is unknown,
the output will default to HTML.  Thus, for example,

    pandoc -o chap1.tex chap1.txt

converts *chap1.txt* from markdown to LaTeX.  And

    pandoc README

converts *README* from markdown to HTML.

Pandoc's version of markdown is an extended variant of standard
markdown: the differences are described in the *README* file in
the user documentation.  If standard markdown syntax is desired, the
`--strict` option may be used.

Pandoc uses the UTF-8 character encoding for both input and output.
If your local character encoding is not UTF-8, you
should pipe input and output through `iconv`:

    iconv -t utf-8 input.txt | pandoc | iconv -f utf-8

# OPTIONS

-f *FORMAT*, -r *FORMAT*, \--from=*FORMAT*, \--read=*FORMAT*
:   Specify input format.  *FORMAT* can be
    `native` (native Haskell), `markdown` (markdown or plain text),
    `rst` (reStructuredText), `html` (HTML), or `latex` (LaTeX).
    If `+lhs` is appended to `markdown`, `rst`, or `latex`, the input
    will be treated as literate Haskell source.

-t *FORMAT*, -w *FORMAT*, \--to=*FORMAT*, \--write=*FORMAT*
:   Specify output format.  *FORMAT* can be `native` (native Haskell),
    `plain` (plain text), `markdown` (markdown), `rst` (reStructuredText),
    `html` (HTML), `latex` (LaTeX), `context` (ConTeXt), `man` (groff man), 
    `mediawiki` (MediaWiki markup), `texinfo` (GNU Texinfo),
    `docbook` (DocBook XML), `opendocument` (OpenDocument XML),
    `odt` (OpenOffice text document), `epub` (EPUB book),
    `slidy` (Slidy HTML and javascript slide show),
    `s5` (S5 HTML and javascript slide show), or `rtf` (rich text
    format). Note that `odt` and `epub` output will not be directed to
    *stdout*; an output filename must be specified using the `-o/--output`
    option.  If `+lhs` is appended to `markdown`, `rst`, `latex`, or `html`,
    the output will be rendered as literate Haskell source.

-s, \--standalone
:   Produce output with an appropriate header and footer (e.g. a
    standalone HTML, LaTeX, or RTF file, not a fragment).

-o *FILE*, \--output=*FILE*
:   Write output to *FILE* instead of *stdout*.  If *FILE* is
    \``-`', output will go to *stdout*.

-p, \--preserve-tabs
:   Preserve tabs instead of converting them to spaces.

\--tab-stop=*TABSTOP*
:   Specify tab stop (default is 4).

\--strict
:   Use strict markdown syntax, with no extensions or variants.

\--reference-links
:   Use reference-style links, rather than inline links, in writing markdown
    or reStructuredText.

-R, \--parse-raw
:   Parse untranslatable HTML codes and LaTeX environments as raw HTML
    or LaTeX, instead of ignoring them.

-S, \--smart
:   Use smart quotes, dashes, and ellipses.  (This option is significant
    only when the input format is `markdown`.  It is selected automatically
    when the output format is `latex` or `context`.)

-m*URL*, \--latexmathml=*URL*
:   Use LaTeXMathML to display embedded TeX math in HTML output.
    To insert a link to a local copy of the `LaTeXMathML.js` script,
    provide a *URL*. If no *URL* is provided, the contents of the
    script will be inserted directly into the HTML header.

\--mathml
:   Convert TeX math to MathML.  In standalone mode, a small javascript
    will be inserted that allows the MathML to be viewed on some browsers.

\--jsmath=*URL*
:   Use jsMath to display embedded TeX math in HTML output.
    The *URL* should point to the jsMath load script; if provided,
    it will be linked to in the header of standalone HTML documents.

\--gladtex
:   Enclose TeX math in `<eq>` tags in HTML output.  These can then
    be processed by gladTeX to produce links to images of the typeset
    formulas. 

\--mimetex=*URL*
:   Render TeX math using the mimeTeX CGI script.  If *URL* is not specified,
    it is assumed that the script is at `/cgi-bin/mimetex.cgi`.

\--webtex=*URL*
:   Render TeX math using an external script. The formula will be
    concatenated with the URL provided. If *URL* is not specified, the
    Google Chart API will be used.

-i, \--incremental
:   Make list items in Slidy or S5 display incrementally (one by one).

\--offline
:   Include all the CSS and javascript needed for a Slidy or S5 slide
    show in the output, so that the slide show will work even when no
    internet connection is available.

\--xetex
:   Create LaTeX outut suitable for processing by XeTeX.

-N, \--number-sections
:   Number section headings in LaTeX, ConTeXt, or HTML output.
    (Default is not to number them.)

\--section-divs
:   Wrap sections in `<div>` tags, and attach identifiers to the
    enclosing `<div>` rather than the header itself.

\--no-wrap
:   Disable text wrapping in output. (Default is to wrap text.)

\--sanitize-html
:   Sanitizes HTML (in markdown or HTML input) using a whitelist.
    Unsafe tags are replaced by HTML comments; unsafe attributes
    are omitted.  URIs in links and images are also checked against a
    whitelist of URI schemes.

\--email-obfuscation=*none|javascript|references*
:   Specify a method for obfuscating `mailto:` links in HTML documents.
    *none* leaves `mailto:` links as they are.  *javascript* obfuscates
    them using javascript. *references* obfuscates them by printing their
    letters as decimal or hexadecimal character references.
    If `--strict` is specified, *references* is used regardless of the
    presence of this option.

\--id-prefix*=string*
:   Specify a prefix to be added to all automatically generated identifiers
    in HTML output.  This is useful for preventing duplicate identifiers
    when generating fragments to be included in other pages.

\--indented-code-classes*=classes*
:   Specify classes to use for indented code blocks--for example,
    `perl,numberLines` or `haskell`. Multiple classes may be separated
    by spaces or commas.

\--toc, \--table-of-contents
:   Include an automatically generated table of contents (HTML, markdown,
    RTF) or an instruction to create one (LaTeX, reStructuredText).
    This option has no effect on man, DocBook, Slidy, or S5 output.

\--base-header-level=*LEVEL*
:   Specify the base level for headers (defaults to 1).

\--template=*FILE*
:   Use *FILE* as a custom template for the generated document. Implies
    `-s`. See TEMPLATES below for a description of template syntax. If
    this option is not used, a default template appropriate for the
    output format will be used. See also `-D/--print-default-template`.

-V KEY=VAL, \--variable=*KEY:VAL*
:   Set the template variable KEY to the value VAL when rendering the
    document in standalone mode. This is only useful when the
    `--template` option is used to specify a custom template, since
    pandoc automatically sets the variables used in the default
    templates.

-c *CSS*, \--css=*CSS*
:   Link to a CSS style sheet.  *CSS* is the pathname of the style sheet.

-H *FILE*, \--include-in-header=*FILE*
:   Include contents of *FILE* at the end of the header.  Implies `-s`.

-B *FILE*, \--include-before-body=*FILE*
:   Include contents of *FILE* at the beginning of the document body.
    Implies `-s`.

-A *FILE*, \--include-after-body=*FILE*
:   Include contents of *FILE* at the end of the document body.
    Implies `-s`.

-C *FILE*, \--custom-header=*FILE*
:   Use contents of *FILE* as the document header. *Note: This option is
    deprecated. Users should transition to using `--template` instead.*

\--reference-odt=*filename*
:   Use the specified file as a style reference in producing an ODT.
    For best results, the reference ODT should be a modified version
    of an ODT produced using pandoc.  The contents of the reference ODT
    are ignored, but its stylesheets are used in the new ODT. If no
    reference ODT is specified on the command line, pandoc will look
    for a file `reference.odt` in the user data directory (see
    `--data-dir`). If this is not found either, sensible defaults will be
    used.

\--epub-stylesheet=*filename*
:   Use the specified CSS file to style the EPUB.  If no stylesheet
    is specified, pandoc will look for a file `epub.css` in the
    user data directory (see `--data-dir`, below).  If it is not
    found there, sensible defaults will be used.

\--epub-metadata=*filename*
:   Look in the specified XML file for metadata for the EPUB.
    The file should contain a series of Dublin Core elements
    (http://dublincore.org/documents/dces/), for example:

         <dc:rights>Creative Commons</dc:rights>
         <dc:language>es-AR</dc:language>

    By default, pandoc will include the following metadata elements:
    `<dc:title>` (from the document title), `<dc:creator>` (from the
    document authors), `<dc:language>` (from the locale), and
    `<dc:identifier id="BookId">` (a randomly generated UUID). Any of
    these may be overridden by elements in the metadata file.

-D *FORMAT*, \--print-default-template=*FORMAT*
:   Print the default template for an output *FORMAT*. (See `-t`
    for a list of possible *FORMAT*s.)

-T *STRING*, \--title-prefix=*STRING*
:   Specify *STRING* as a prefix to the HTML window title.

\--data-dir*=DIRECTORY*
:   Specify the user data directory to search for pandoc data files.
    If this option is not specified, the default user data directory
    will be used:

        $HOME/.pandoc

    in unix and

        C:\Documents And Settings\USERNAME\Application Data\pandoc

    in Windows. A `reference.odt`, `epub.css`, `templates` directory,
    or `s5` directory placed in this directory will override pandoc's
    normal defaults.

\--dump-args
:   Print information about command-line arguments to *stdout*, then exit.
    The first line of output contains the name of the output file specified
    with the `-o` option, or \``-`' (for *stdout*) if no output file was
    specified.  The remaining lines contain the command-line arguments,
    one per line, in the order they appear.  These do not include regular
    Pandoc options and their arguments, but do include any options appearing
    after a \``--`' separator at the end of the line.
    This option is intended primarily for use in wrapper scripts.

\--ignore-args
:   Ignore command-line arguments (for use in wrapper scripts).
    Regular Pandoc options are not ignored.  Thus, for example,

        pandoc --ignore-args -o foo.html -s foo.txt -- -e latin1

    is equivalent to

        pandoc -o foo.html -s

-v, \--version
:   Print version.

-h, \--help
:   Show usage message.

# TEMPLATES

When the `-s/--standalone` option is used, pandoc uses a template to
add header and footer material that is needed for a self-standing
document.  To see the default template that is used, just type

    pandoc --print-default-template=FORMAT

where `FORMAT` is the name of the output format. A custom template
can be specified using the `--template` option.  You can also override
the system default templates for a given output format `FORMAT`
by putting a file `templates/FORMAT.template` in the user data
directory (see `--data-dir`, below).

Templates may contain *variables*.  Variable names are sequences of
alphanumerics, `-`, and `_`, starting with a letter.  A variable name
surrounded by `$` signs will be replaced by its value.  For example,
the string `$title$` in

    <title>$title$</title>

will be replaced by the document title.

To write a literal `$` in a template, use `$$`.

Some variables are set automatically by pandoc.  These vary somewhat
depending on the output format, but include:

`legacy-header`
:   contents specified by `-C/--custom-header`
`header-includes`
:   contents specified by `-H/--include-in-header` (may have multiple
    values)
`toc`
:   non-null value if `--toc/--table-of-contents` was specified
`include-before`
:   contents specified by `-B/--include-before-body` (may have
    multiple values)
`include-after`
:   contents specified by `-A/--include-after-body` (may have
    multiple values)
`body`
:   body of document
`title`
:   title of document, as specified in title block
`author`
:   author of document, as specified in title block (may have
    multiple values)
`date`
:   date of document, as specified in title block

Variables may be set at the command line using the `-V/--variable`
option. This allows users to include custom variables in their
templates.

Templates may contain conditionals.  The syntax is as follows:

    $if(variable)$
    X 
    $else$
    Y
    $endif$

This will include `X` in the template if `variable` has a non-null
value; otherwise it will include `Y`. `X` and `Y` are placeholders for
any valid template text, and may include interpolated variables or other
conditionals. The `$else$` section may be omitted.

When variables can have multiple values (for example, `author` in
a multi-author document), you can use the `$for$` keyword:

    $for(author)$
    <meta name="author" content="$author$" />
    $endfor$

You can optionally specify a separator to be used between
consecutive items:

    $for(author)$$author$$sep$, $endfor$

# SEE ALSO

`markdown2pdf` (1).
The *README* file distributed with Pandoc contains full documentation.

The Pandoc source code and all documentation may be downloaded from
<http://johnmacfarlane.net/pandoc/>.

이것을 매뉴얼 페이지로 변환하려면 다음을 실행하십시오.

pandoc -s -t man pandoc.1.md -o example10.1

심상결과변환됨(생성된 매뉴얼 페이지의 일부):

당신은 할 수설치하다 판독저장소에서최대 인기 있는 리눅스 분산.

추가 링크:

• 더 많은 Pandoc 데모
• Pandoc을 온라인으로 사용해 보세요
• 판독 매뉴얼
• GitHub의 Pandoc(참고: >430관찰자, >11400별, >1350포크)
• Wikipedia의 Pandoc

간단히 말해서 man groff_man파일 형식(웹 버전).

저장 /usr/local/man/man1하거나 /usr/share/man/man1작동하지 않는 경우.

바라보다맨페이지 HOWTO자세한 내용은.

~에 따르면이 페이지, 그것은 간단합니다:

nano nuseradd

그런 다음 이와 같은 예제를 붙여넣고 수정하세요.이 페이지(또는 man 7 mdoc) 형식 옵션 해석:

.\" Manpage for nuseradd.
.\" Contact [email protected] to correct errors or typos.
.TH man 8 "06 May 2010" "1.0" "nuseradd man page"
.SH NAME
nuseradd \- create a new LDAP user
.SH SYNOPSIS
nuseradd [USERNAME]
.SH DESCRIPTION
nuseradd is high level shell program for adding users to LDAP server.  On Debian, administrators should usually use nuseradd.debian(8) instead.
.SH OPTIONS
The nuseradd does not take any options. However, you can supply username.
.SH SEE ALSO
useradd(8), passwd(5), nuseradd.debian(8)
.SH BUGS
No known bugs.
.SH AUTHOR
Vivek Gite ([email protected])

그런 다음 새 매뉴얼 페이지를 gzip으로 압축하여 올바른 매뉴얼 섹션에 복사하세요.

1   Executable shell commands
2   System calls (functions provided by the kernel)
3   Library calls (functions within program libraries)
4   Special files (usually found in /dev)
5   File formats and conventions eg /etc/passwd
6   Games
7   Miscellaneous (including macro packages and conventions), e.g. man(7), groff(7)
8   System administration commands (usually only for root)
9   Kernel routines [Non standard]

이 예는 관리 도구이므로 섹션 8에 있습니다.

cat nuseradd |gzip > /usr/local/man/man8/nuseradd.1

아니면 누군가다른 위치에서 읽어 보세요., 예를 들어 로컬:man ./nuseradd