NetworkManager는 LMDE에서 TTLS 및 PAP를 사용하여 WPA-EAP에 인증할 수 없습니다.

저는 업데이트 팩 7이 포함된 Debian 버전의 Linux Mint를 실행하고 있습니다. TTLS와 PAP를 사용하여 WPA 기업 네트워크에 연결하려고 했지만 성공하지 못했습니다.

문제는 인증에 있는 것 같습니다. 시각적으로 NetworkManager가 계속해서 비밀번호를 묻습니다. 비밀번호는 정확하며 Android, Ubuntu 및 ArchLinux Manjaro에서 작동합니다. 이전에 LMDE UP6에서 작동하는 것을 보았지만 지금은 작동하지 않습니다(UP7).

내가 얻은 로그는 다음과 같습니다(읽기 쉽도록 시간을 제거했습니다).

NetworkManager[2641]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
NetworkManager[2641]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[2641]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
NetworkManager[2641]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
NetworkManager[2641]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager[2641]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[2641]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
NetworkManager[2641]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
NetworkManager[2641]: <info> Activation (wlan0/wireless): connection 'EduRoam CACert' has security, and secrets exist.  No new secrets needed.
NetworkManager[2641]: <info> Config: added 'ssid' value 'eduroam'
NetworkManager[2641]: <info> Config: added 'scan_ssid' value '1'
NetworkManager[2641]: <info> Config: added 'key_mgmt' value 'WPA-EAP'
NetworkManager[2641]: <info> Config: added 'password' value '<omitted>'
NetworkManager[2641]: <info> Config: added 'eap' value 'TTLS'
NetworkManager[2641]: <info> Config: added 'fragment_size' value '1300'
NetworkManager[2641]: <info> Config: added 'phase2' value 'auth=PAP'
NetworkManager[2641]: <info> Config: added 'ca_path' value '/etc/ssl/certs'
NetworkManager[2641]: <info> Config: added 'ca_path2' value '/etc/ssl/certs'
NetworkManager[2641]: <info> Config: added 'ca_cert' value '/home/darkhogg/.eduroam/ca.pem'
NetworkManager[2641]: <info> Config: added 'identity' value '[email protected]'
NetworkManager[2641]: <info> Config: added 'anonymous_identity' value '[email protected]'
NetworkManager[2641]: <info> Config: added 'bgscan' value 'simple:30:-45:300'
NetworkManager[2641]: <info> Config: added 'proactive_key_caching' value '1'
NetworkManager[2641]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
NetworkManager[2641]: <info> Config: set interface ap_scan to 1
NetworkManager[2641]: <info> (wlan0): supplicant interface state: disconnected -> scanning
NetworkManager[2641]: <info> (wlan0): supplicant interface state: scanning -> authenticating
NetworkManager[2641]: <info> (wlan0): supplicant interface state: authenticating -> associated
NetworkManager[2641]: <info> (wlan0): supplicant interface state: associated -> disconnected
NetworkManager[2641]: <info> (wlan0): supplicant interface state: disconnected -> scanning
NetworkManager[2641]: <info> (wlan0): supplicant interface state: scanning -> authenticating
NetworkManager[2641]: <info> (wlan0): supplicant interface state: authenticating -> associating
NetworkManager[2641]: <info> (wlan0): supplicant interface state: associating -> associated
NetworkManager[2641]: <info> (wlan0): supplicant interface state: associated -> disconnected
NetworkManager[2641]: <info> (wlan0): supplicant interface state: disconnected -> scanning
NetworkManager[2641]: <info> (wlan0): supplicant interface state: scanning -> authenticating
NetworkManager[2641]: <info> (wlan0): supplicant interface state: authenticating -> associating
NetworkManager[2641]: <info> (wlan0): supplicant interface state: associating -> associated
NetworkManager[2641]: <info> (wlan0): supplicant interface state: associated -> disconnected
NetworkManager[2641]: <info> (wlan0): supplicant interface state: disconnected -> scanning
NetworkManager[2641]: <info> (wlan0): supplicant interface state: scanning -> authenticating
NetworkManager[2641]: <info> (wlan0): supplicant interface state: authenticating -> associating
NetworkManager[2641]: <info> (wlan0): supplicant interface state: associating -> associated
NetworkManager[2641]: <info> (wlan0): supplicant interface state: associated -> disconnected
NetworkManager[2641]: <info> (wlan0): supplicant interface state: disconnected -> scanning
NetworkManager[2641]: <warn> Activation (wlan0/wireless): association took too long.
NetworkManager[2641]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
NetworkManager[2641]: <warn> Activation (wlan0/wireless): asking for new secrets
NetworkManager[2641]: <info> (wlan0): supplicant interface state: scanning -> authenticating
NetworkManager[2641]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
NetworkManager[2641]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.

우리 대학에서는 이 네트워크를 사용하여 eduroamWi-Fi 액세스를 제공합니다. 더 많은 정보를 확인하실 수 있습니다여기. 특히 저는 스페인 출신이고 마드리드 콤플루텐세 대학교에서 공부했습니다. 이는 모든 대학이 원하는 대로 어느 정도 구현한다는 것을 이해하기 때문에 관련이 있을 수 있습니다.

스크립트와 구성이 포함된 여러 튜토리얼을 따라했지만 성공하지 못했습니다 wpa_supplicant. 결과는 항상 동일했습니다. 인증이 실패하고 비밀번호를 묻는 반복이 다시 발생했습니다.