최근에 Arch를 설치했지만 아직 설정하지 않았습니다. 특히 WiFi가 (Arch에서) 표시되지만 연결할 수 없습니다. 클릭해도 아무 일도 일어나지 않습니다. 무엇이 문제일까요?
$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp5s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 28:d2:44:16:42:e5 brd ff:ff:ff:ff:ff:ff
3: wlp4s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 68:17:29:70:56:cf brd ff:ff:ff:ff:ff:ff
inet6 fe80::6a17:29ff:fe70:56cf/64 scope link
valid_lft forever preferred_lft forever