init.d 스크립트에 변수 전달

내 init.d 스크립트는 다음과 같습니다.

매개변수를 사용하여 데몬 프로세스를 시작하고 싶습니다.

--http_root /tv

데몬 없이 애플리케이션을 시작하면 매개변수가 허용됩니다.

하지만 해당 매개변수로 데몬을 시작하기 위해 아래 스크립트를 조정하는 방법을 알 수 없는 것 같습니다. 매개변수가 매번 전달되기를 원합니다.

sudo service tvheadend start

이미 보냈습니다. init.d 스크립트에 매개변수를 전달하고 싶지 않습니다.

어떻게 해야 하나요?

#! /bin/sh
### BEGIN INIT INFO
# Provides:          tvheadend
# Required-Start:    $local_fs $remote_fs udev
# Required-Stop:     $local_fs $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
### END INIT INFO

# Author: Andreas Öman

# Do NOT "set -e"

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/usr/sbin:/usr/bin:/sbin:/bin
DESC="Tvheadend"
NAME=tvheadend
DAEMON=/usr/bin/$NAME
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Configure command line options
[ "$TVH_ENABLED" = "1" ] || exit 0

ARGS="-f"
[ -z "$TVH_USER"      ] || ARGS="$ARGS -u $TVH_USER"
[ -z "$TVH_GROUP"     ] || ARGS="$ARGS -g $TVH_GROUP"
[ -z "$TVH_CONF_DIR"  ] || ARGS="$ARGS -c $TVH_CONF_DIR"
[ -z "$TVH_ADAPTERS"  ] || ARGS="$ARGS -a $TVH_ADAPTERS"
[ "$TVH_IPV6" = "1"   ] && ARGS="$ARGS -6"
[ -z "$TVH_HTTP_PORT" ] || ARGS="$ARGS --http_port $TVH_HTTP_PORT"
[ -z "$TVH_HTTP_ROOT" ] || ARGS="$ARGS --http_root $TVH_HTTP_ROOT"
[ -z "$TVH_HTSP_PORT" ] || ARGS="$ARGS --htsp_port $TVH_HTSP_PORT"
[ -z "$TVH_ARGS"      ] || ARGS="$ARGS $TVH_ARGS"
[ "$TVH_DEBUG" = "1"  ] && ARGS="$ARGS -s"

# Load the VERBOSE setting and other rcS variables
[ -f /etc/default/rcS ] && . /etc/default/rcS

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
    # Return
    #   0 if daemon has been started
    #   1 if daemon was already running
    #   2 if daemon could not be started
        udevadm settle
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
        || return 1
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
        $ARGS \
        || return 2
}

#
# Function that stops the daemon/service
#
do_stop()
{
    # Return
    #   0 if daemon has been stopped
    #   1 if daemon was already stopped
    #   2 if daemon could not be stopped
    #   other if a failure occurred
    start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
    RETVAL="$?"
    [ "$RETVAL" = 2 ] && return 2
    # Many daemons don't delete their pidfiles when they exit.
    rm -f $PIDFILE
    return "$RETVAL"
}


case "$1" in
  start)
    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
    do_start
    case "$?" in
        0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
        2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
  stop)
    [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
    do_stop
    case "$?" in
        0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
        2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
  restart|force-reload)
    #
    # If the "reload" option is implemented then remove the
    # 'force-reload' alias
    #
    log_daemon_msg "Restarting $DESC" "$NAME"
    do_stop
    case "$?" in
      0|1)
        do_start
        case "$?" in
            0) log_end_msg 0 ;;
            1) log_end_msg 1 ;; # Old process is still running
            *) log_end_msg 1 ;; # Failed to start
        esac
        ;;
      *)
        # Failed to stop
        log_end_msg 1
        ;;
    esac
    ;;
  *)
    echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
    exit 3
    ;;
esac

: