Debian6 64비트에서 센서 감지를 실행하려고 하는데 다음과 같은 결과가 나타납니다.
죄송합니다. 센서가 감지되지 않았습니다. 시스템에 센서가 없거나 지원되지 않거나 지원되지 않는 I2C 또는 SMBus 어댑터에 연결되어 있습니다.
센서 애플릿과 센서 CPU가 올바르게 실행 중입니다.
root@debian:/# dmesg | grep -i error
[ 0.558964] ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
[ 7.537292] PM: Error -22 checking image file
[ 9.581500] nouveau: probe of 0000:01:00.0 failed with error -22
root@debian:/# lspci
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09)
00:02.0 Display controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5)
00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 7 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation Device 1244 (rev a1)
01:00.1 Audio device: nVidia Corporation Device 0bee (rev a1)
03:00.0 USB Controller: Device 1b21:1042
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
05:00.0 PCI bridge: Device 1b21:1080 (rev 01)
다음과 같은 실행 센서만 표시됩니다.
root@debian:/# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +99.0°C)
temp2: +29.8°C (crit = +99.0°C)
이 제안된 스크립트(http://dl.lm-sensors.org/lm-sensors/files/sensors-Detect)를 사용하면 센서 감지가 더 많은 것을 찾는 것 같습니다. Debian을 다시 시작하거나 lm-sensor 서비스를 시작하면 센서의 동일한 출력