텍스트 입력이 필요한 창(터미널, IDE, 브라우저 등)으로 초점을 변경할 때 처음 몇 번 + CTRL, C+ CTRL또는 V+ CTRL조합이 A작동하지 않고 문자만 삽입하면 됩니다. 이후 1-2-3회 정도 지나니 정상적으로 작동이 시작되었습니다.
CTRL일부 프로그램이 이를 가로채고 일정 시간이 지난 후에야 해제하는 것처럼 느껴집니다 .
문제를 해결하도록 도와주세요.
참고: 이는 몇 가지 업데이트 외에 시스템 설정을 변경하지 않고 무작위로 시작되었습니다. 아무도 손으로 구성을 건드리지 않았으니 100%입니다.
System:
Kernel: 5.15.0-91-generic x86_64 bits: 64 compiler: gcc v: 11.4.0
Desktop: MATE 1.26.0 Distro: Linux Mint 21.2 Victoria
base: Ubuntu 22.04 jammy
Machine:
Type: Laptop System: LENOVO product: 81NE v: Lenovo IdeaPad S540-15IWL
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: No DPK serial: <superuser required>
UEFI: LENOVO v: APCN31WW date: 07/18/2019
Battery:
ID-1: BAT0 charge: 59.0 Wh (95.8%) condition: 61.6/70.1 Wh (87.9%)
volts: 16.8 min: 15.2 model: SMP L18M4PF5 status: Charging
CPU:
Info: quad core model: Intel Core i7-8565U bits: 64 type: MT MCP
arch: Comet/Whiskey Lake note: check rev: C cache: L1: 256 KiB L2: 1024 KiB
L3: 8 MiB
Speed (MHz): avg: 623 high: 700 min/max: 400/4600 cores: 1: 635 2: 700
3: 649 4: 600 5: 600 6: 600 7: 600 8: 600 bogomips: 31999
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel WhiskeyLake-U GT2 [UHD Graphics 620] vendor: Lenovo
driver: i915 v: kernel bus-ID: 00:02.0
Device-2: IMC Networks Integrated Camera type: USB driver: uvcvideo
bus-ID: 1-4:3
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: modesetting
unloaded: fbdev,vesa gpu: i915 resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa Intel UHD Graphics 620 (WHL GT2)
v: 4.6 Mesa 23.0.4-0ubuntu1~22.04.1 direct render: Yes
Audio:
Device-1: Intel Cannon Point-LP High Definition Audio vendor: Lenovo
driver: snd_hda_intel v: kernel bus-ID: 00:1f.3
Sound Server-1: ALSA v: k5.15.0-91-generic running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: no
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel Cannon Point-LP CNVi [Wireless-AC] driver: iwlwifi
v: kernel bus-ID: 00:14.3
IF: wlp0s20f3 state: up mac: <filter>
IF-ID-1: br-1ac2f2e40bea state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-2: br-45804a830400 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-3: br-864ecca4332c state: down mac: <filter>
IF-ID-4: br-8da35ad00b95 state: down mac: <filter>
IF-ID-5: br-c290156f9647 state: down mac: <filter>
IF-ID-6: br-c49216d2fecf state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-7: br-d189c579e022 state: down mac: <filter>
IF-ID-8: br-ee108dbaec61 state: down mac: <filter>
IF-ID-9: CloudflareWARP state: unknown speed: 10 Mbps duplex: full
mac: N/A
IF-ID-10: docker0 state: down mac: <filter>
IF-ID-11: veth082f7d8 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-12: veth84b7d92 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-13: veth89ff816 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-14: vethaa9063f state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-15: vethdbb3fc2 state: up speed: 10000 Mbps duplex: full
mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB
driver: btusb v: 0.8 bus-ID: 1-10:5
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter>
bt-v: 3.0 lmp-v: 5.1
Drives:
Local Storage: total: 953.87 GiB used: 233.26 GiB (24.5%)
ID-1: /dev/nvme0n1 vendor: Intel model: SSDPEKKW010T8L size: 953.87 GiB
temp: 32.9 C
Partition:
ID-1: / size: 914.69 GiB used: 116.34 GiB (12.7%) fs: ext4 dev: /dev/dm-1
mapped: vgmint-root
ID-2: /boot size: 1.61 GiB used: 593.6 MiB (36.1%) fs: ext4
dev: /dev/nvme0n1p2
ID-3: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat
dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 12 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
System Temperatures: cpu: 27.8 C pch: 38.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 327 Uptime: 1h 54m Memory: 11.44 GiB used: 3.89 GiB (34.1%)
Init: systemd runlevel: 5 Compilers: gcc: 11.4.0 Packages: 2376 Shell: Zsh
v: 5.8.1 inxi: 3.3.13