매우 이상한 문제가 있습니다. 며칠 동안 git, ssh 및 vpn에 문제가 있었지만 Amazon eero 라우터를 사용할 때만 발생했습니다. 스마트폰 핫스팟을 사용하여 eero에 연결하거나 모뎀/라우터에 직접 연결하는 데 문제가 없습니다.
문제는 다음과 같습니다. SSH 연결이 필요한 git 명령을 실행하려고 하면 명령이 출력되지 않고 중단됩니다. SSH 연결 없이 동일한 명령을 실행하면 제대로 작동합니다. 예를 들어, 동일한 저장소에서는 git clone https://...제대로 작동 git clone git@...하지만 그렇지 않습니다.
ssh그 자체로는 잘 작동하고 내 서버와 github에도 연결할 수 있지만 -T매개 변수를 추가하면 github 또는 다른 서버에 연결하려고 할 때 ssh가 중단되기 시작합니다. 10~15분 동안 매달린 후 그것은 나에게 말했습니다 Connection to server.x closed by remote host.
게다가 VPN에 연결하려고 하면(저는 NordVPN을 사용합니다) VPN은 연결되지만 인터넷 연결이 중단됩니다.
앞서 말했듯이 이러한 모든 문제는 Amazon eero 라우터에 연결했을 때만 발생하기 시작했습니다.
제가 사용하는 운영체제는 아치리눅스입니다. 동일한 시스템에서 Windows를 부팅하면 VPN에 연결하거나 SSH 기반 git 명령을 실행할 수 있습니다.
내가 시도한 것은 다음과 같습니다.
- eero 라우터에서 DNS 변경
- 로컬 컴퓨터에서 DNS 변경
- eero 라우터의 NAT 포트 22 및 9418, eero에 연결하기 위한 라우터의 포트 22 및 9418
- 라우터와 로컬 컴퓨터에서 모든 방화벽을 비활성화합니다.
- eero 라우터 하드 리셋
이 중 어느 것도 작동하지 않습니다.
다음은 예제(작동 중)와 그 중 하나(작동하지 않음)입니다.ssh -vvv [email protected]ssh -Tvvv [email protected]
ssh -vvv [email protected](피복재)
OpenSSH_9.5p1, OpenSSL 3.1.4 24 Oct 2023
debug1: Reading configuration data /home/skato/.ssh/config
debug1: /home/skato/.ssh/config line 1: Applying options for github.com
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 2: include /etc/ssh/ssh_config.d/*.conf matched no files
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/skato/.ssh/known_hosts'
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/skato/.ssh/known_hosts2'
debug2: resolving "github.com" port 22
debug3: resolve_host: lookup github.com:22
debug3: ssh_connect_direct: entering
debug1: Connecting to github.com [140.82.121.4] port 22.
debug3: set_sock_tos: set socket 3 IP_TOS 0x48
debug1: Connection established.
debug1: identity file /home/skato/.ssh/id_rsa type 0
debug1: identity file /home/skato/.ssh/id_rsa-cert type -1
debug1: identity file /home/skato/.ssh/id_ecdsa type -1
debug1: identity file /home/skato/.ssh/id_ecdsa-cert type -1
debug1: identity file /home/skato/.ssh/id_ecdsa_sk type -1
debug1: identity file /home/skato/.ssh/id_ecdsa_sk-cert type -1
debug1: identity file /home/skato/.ssh/id_ed25519 type -1
debug1: identity file /home/skato/.ssh/id_ed25519-cert type -1
debug1: identity file /home/skato/.ssh/id_ed25519_sk type -1
debug1: identity file /home/skato/.ssh/id_ed25519_sk-cert type -1
debug1: identity file /home/skato/.ssh/id_xmss type -1
debug1: identity file /home/skato/.ssh/id_xmss-cert type -1
debug1: identity file /home/skato/.ssh/id_dsa type -1
debug1: identity file /home/skato/.ssh/id_dsa-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_9.5
debug1: Remote protocol version 2.0, remote software version babeld-f8b1fc6c
debug1: compat_banner: no match: babeld-f8b1fc6c
debug2: fd 3 setting O_NONBLOCK
debug1: Authenticating to github.com:22 as 'git'
debug3: record_hostkey: found key type ED25519 in file /home/skato/.ssh/known_hosts:3
debug3: record_hostkey: found key type ECDSA in file /home/skato/.ssh/known_hosts:4
debug3: record_hostkey: found key type RSA in file /home/skato/.ssh/known_hosts:12
debug3: load_hostkeys_file: loaded 3 keys from github.com
debug1: load_hostkeys: fopen /home/skato/.ssh/known_hosts2: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory
debug3: order_hostkeyalgs: have matching best-preference key type [email protected], using HostkeyAlgorithms verbatim
debug3: send packet: type 20
debug1: SSH2_MSG_KEXINIT sent
debug3: receive packet: type 20
debug1: SSH2_MSG_KEXINIT received
debug2: local client KEXINIT proposal
debug2: KEX algorithms: [email protected],curve25519-sha256,[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,ext-info-c
debug2: host key algorithms: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],rsa-sha2-512,rsa-sha2-256
debug2: ciphers ctos: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: ciphers stoc: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: MACs ctos: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,[email protected],zlib
debug2: compression stoc: none,[email protected],zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256
debug2: host key algorithms: ssh-ed25519,ecdsa-sha2-nistp256,rsa-sha2-512,rsa-sha2-256,ssh-rsa
debug2: ciphers ctos: [email protected],[email protected],[email protected],aes256-ctr,aes192-ctr,aes128-ctr
debug2: ciphers stoc: [email protected],[email protected],[email protected],aes256-ctr,aes192-ctr,aes128-ctr
debug2: MACs ctos: [email protected],[email protected],hmac-sha2-512,hmac-sha2-256
debug2: MACs stoc: [email protected],[email protected],hmac-sha2-512,hmac-sha2-256
debug2: compression ctos: none,[email protected],zlib
debug2: compression stoc: none,[email protected],zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug1: kex: algorithm: curve25519-sha256
debug1: kex: host key algorithm: ssh-ed25519
debug1: kex: server->client cipher: [email protected] MAC: <implicit> compression: none
debug1: kex: client->server cipher: [email protected] MAC: <implicit> compression: none
debug3: send packet: type 30
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug3: receive packet: type 31
debug1: SSH2_MSG_KEX_ECDH_REPLY received
debug1: Server host key: ssh-ed25519 SHA256:+DiY3wvvV6TuJJhbpZisF/zLDA0zPMSvHdkr4UvCOqU
debug3: record_hostkey: found key type ED25519 in file /home/skato/.ssh/known_hosts:3
debug3: record_hostkey: found key type ECDSA in file /home/skato/.ssh/known_hosts:4
debug3: record_hostkey: found key type RSA in file /home/skato/.ssh/known_hosts:12
debug3: load_hostkeys_file: loaded 3 keys from github.com
debug1: load_hostkeys: fopen /home/skato/.ssh/known_hosts2: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory
debug1: Host 'github.com' is known and matches the ED25519 host key.
debug1: Found key in /home/skato/.ssh/known_hosts:3
debug3: send packet: type 21
debug2: ssh_set_newkeys: mode 1
debug1: rekey out after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: receive packet: type 21
debug1: SSH2_MSG_NEWKEYS received
debug2: ssh_set_newkeys: mode 0
debug1: rekey in after 134217728 blocks
debug1: Will attempt key: /home/skato/.ssh/id_rsa RSA SHA256:zaBX+3TpV+3eRToKSta/UFkCrA+YnOfS25Ki4179Txg
debug1: Will attempt key: /home/skato/.ssh/id_ecdsa
debug1: Will attempt key: /home/skato/.ssh/id_ecdsa_sk
debug1: Will attempt key: /home/skato/.ssh/id_ed25519
debug1: Will attempt key: /home/skato/.ssh/id_ed25519_sk
debug1: Will attempt key: /home/skato/.ssh/id_xmss
debug1: Will attempt key: /home/skato/.ssh/id_dsa
debug2: pubkey_prepare: done
debug3: send packet: type 5
debug3: receive packet: type 7
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=<[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],ssh-ed25519,ecdsa-sha2-nistp521,ecdsa-sha2-nistp384,ecdsa-sha2-nistp256,rsa-sha2-512,rsa-sha2-256,ssh-rsa>
debug3: receive packet: type 6
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug3: send packet: type 50
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey
debug3: start over, passed a different list publickey
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /home/skato/.ssh/id_rsa RSA SHA256:zaBX+3TpV+3eRToKSta/UFkCrA+YnOfS25Ki4179Txg
debug3: send packet: type 50
debug2: we sent a publickey packet, wait for reply
debug3: receive packet: type 60
debug1: Server accepts key: /home/skato/.ssh/id_rsa RSA SHA256:zaBX+3TpV+3eRToKSta/UFkCrA+YnOfS25Ki4179Txg
debug3: sign_and_send_pubkey: using publickey with RSA SHA256:zaBX+3TpV+3eRToKSta/UFkCrA+YnOfS25Ki4179Txg
debug3: sign_and_send_pubkey: signing using rsa-sha2-512 SHA256:zaBX+3TpV+3eRToKSta/UFkCrA+YnOfS25Ki4179Txg
debug3: send packet: type 50
debug3: receive packet: type 52
Authenticated to github.com ([140.82.121.4]:22) using "publickey".
debug1: channel 0: new session [client-session] (inactive timeout: 0)
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug3: send packet: type 90
debug1: Entering interactive session.
debug1: pledge: filesystem
debug3: client_repledge: enter
debug3: receive packet: type 80
debug1: client_input_global_request: rtype [email protected] want_reply 0
debug3: client_input_hostkeys: received RSA key SHA256:uNiVztksCsDhcc0u9e8BujQXVUpKZIDTMczCvj3tD2s
debug3: client_input_hostkeys: received ECDSA key SHA256:p2QAMXNIC1TJYWeIOttrVc98/R1BUFWu3/LiyKgUfQM
debug3: client_input_hostkeys: received ED25519 key SHA256:+DiY3wvvV6TuJJhbpZisF/zLDA0zPMSvHdkr4UvCOqU
debug1: client_input_hostkeys: searching /home/skato/.ssh/known_hosts for github.com / (none)
debug3: hostkeys_foreach: reading file "/home/skato/.ssh/known_hosts"
debug3: hostkeys_find: found ssh-ed25519 key at /home/skato/.ssh/known_hosts:3
debug3: hostkeys_find: found ecdsa-sha2-nistp256 key at /home/skato/.ssh/known_hosts:4
debug3: hostkeys_find: found ssh-rsa key at /home/skato/.ssh/known_hosts:12
debug1: client_input_hostkeys: searching /home/skato/.ssh/known_hosts2 for github.com / (none)
debug1: client_input_hostkeys: hostkeys file /home/skato/.ssh/known_hosts2 does not exist
debug3: client_input_hostkeys: 3 server keys: 0 new, 3 retained, 0 incomplete match. 0 to remove
debug1: client_input_hostkeys: no new or deprecated keys from server
debug3: client_repledge: enter
debug3: receive packet: type 91
debug2: channel_input_open_confirmation: channel 0: callback start
debug2: fd 3 setting TCP_NODELAY
debug3: set_sock_tos: set socket 3 IP_TOS 0x48
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 1
debug3: send packet: type 98
debug2: channel 0: request shell confirm 1
debug3: send packet: type 98
debug3: client_repledge: enter
debug1: pledge: fork
debug2: channel_input_open_confirmation: channel 0: callback done
debug2: channel 0: open confirm rwindow 32000 rmax 35000
debug3: receive packet: type 100
debug2: channel_input_status_confirm: type 100 id 0
PTY allocation request failed on channel 0
debug3: receive packet: type 99
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
debug2: channel 0: rcvd ext data 3
debug2: channel 0: rcvd ext data 5
debug2: channel 0: rcvd ext data 2
debug2: channel 0: rcvd ext data 76
debug2: channel 0: rcvd ext data 1
debug3: receive packet: type 98
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug3: receive packet: type 96
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug3: receive packet: type 97
debug2: channel 0: rcvd close
debug2: chan_shutdown_read: channel 0: (i0 o1 sock -1 wfd 4 efd 6 [write])
debug2: channel 0: input open -> closed
debug3: channel 0: will not send data after close
debug2: channel 0: obuf_empty delayed efd 6/(87)
Hi sk4t0! You've successfully authenticated, but GitHub does not provide shell access.
debug2: channel 0: written 87 to efd 6
debug3: channel 0: will not send data after close
debug2: channel 0: obuf empty
debug2: chan_shutdown_write: channel 0: (i3 o1 sock -1 wfd 5 efd 6 [write])
debug2: channel 0: output drain -> closed
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug3: send packet: type 97
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
#0 client-session (t4 [session] r43 i3/0 o3/0 e[write]/0 fd -1/-1/6 sock -1 cc -1 io 0x00/0x00)
debug3: send packet: type 1
Connection to github.com closed.
Transferred: sent 3844, received 3076 bytes, in 0.3 seconds
Bytes per second: sent 14869.6, received 11898.8
debug1: Exit status 1
ssh -Tvvv [email protected](작동 안함)
OpenSSH_9.5p1, OpenSSL 3.1.4 24 Oct 2023
debug1: Reading configuration data /home/skato/.ssh/config
debug1: /home/skato/.ssh/config line 1: Applying options for github.com
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 2: include /etc/ssh/ssh_config.d/*.conf matched no files
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/skato/.ssh/known_hosts'
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/skato/.ssh/known_hosts2'
debug2: resolving "github.com" port 22
debug3: resolve_host: lookup github.com:22
debug3: ssh_connect_direct: entering
debug1: Connecting to github.com [140.82.121.4] port 22.
debug3: set_sock_tos: set socket 3 IP_TOS 0x48
debug1: Connection established.
debug1: identity file /home/skato/.ssh/id_rsa type 0
debug1: identity file /home/skato/.ssh/id_rsa-cert type -1
debug1: identity file /home/skato/.ssh/id_ecdsa type -1
debug1: identity file /home/skato/.ssh/id_ecdsa-cert type -1
debug1: identity file /home/skato/.ssh/id_ecdsa_sk type -1
debug1: identity file /home/skato/.ssh/id_ecdsa_sk-cert type -1
debug1: identity file /home/skato/.ssh/id_ed25519 type -1
debug1: identity file /home/skato/.ssh/id_ed25519-cert type -1
debug1: identity file /home/skato/.ssh/id_ed25519_sk type -1
debug1: identity file /home/skato/.ssh/id_ed25519_sk-cert type -1
debug1: identity file /home/skato/.ssh/id_xmss type -1
debug1: identity file /home/skato/.ssh/id_xmss-cert type -1
debug1: identity file /home/skato/.ssh/id_dsa type -1
debug1: identity file /home/skato/.ssh/id_dsa-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_9.5
debug1: Remote protocol version 2.0, remote software version babeld-f8b1fc6c
debug1: compat_banner: no match: babeld-f8b1fc6c
debug2: fd 3 setting O_NONBLOCK
debug1: Authenticating to github.com:22 as 'git'
debug3: record_hostkey: found key type ED25519 in file /home/skato/.ssh/known_hosts:3
debug3: record_hostkey: found key type ECDSA in file /home/skato/.ssh/known_hosts:4
debug3: record_hostkey: found key type RSA in file /home/skato/.ssh/known_hosts:12
debug3: load_hostkeys_file: loaded 3 keys from github.com
debug1: load_hostkeys: fopen /home/skato/.ssh/known_hosts2: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory
debug3: order_hostkeyalgs: have matching best-preference key type [email protected], using HostkeyAlgorithms verbatim
debug3: send packet: type 20
debug1: SSH2_MSG_KEXINIT sent
debug3: receive packet: type 20
debug1: SSH2_MSG_KEXINIT received
debug2: local client KEXINIT proposal
debug2: KEX algorithms: [email protected],curve25519-sha256,[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,ext-info-c
debug2: host key algorithms: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],rsa-sha2-512,rsa-sha2-256
debug2: ciphers ctos: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: ciphers stoc: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: MACs ctos: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,[email protected],zlib
debug2: compression stoc: none,[email protected],zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256
debug2: host key algorithms: ssh-ed25519,ecdsa-sha2-nistp256,rsa-sha2-512,rsa-sha2-256,ssh-rsa
debug2: ciphers ctos: [email protected],[email protected],[email protected],aes256-ctr,aes192-ctr,aes128-ctr
debug2: ciphers stoc: [email protected],[email protected],[email protected],aes256-ctr,aes192-ctr,aes128-ctr
debug2: MACs ctos: [email protected],[email protected],hmac-sha2-512,hmac-sha2-256
debug2: MACs stoc: [email protected],[email protected],hmac-sha2-512,hmac-sha2-256
debug2: compression ctos: none,[email protected],zlib
debug2: compression stoc: none,[email protected],zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug1: kex: algorithm: curve25519-sha256
debug1: kex: host key algorithm: ssh-ed25519
debug1: kex: server->client cipher: [email protected] MAC: <implicit> compression: none
debug1: kex: client->server cipher: [email protected] MAC: <implicit> compression: none
debug3: send packet: type 30
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug3: receive packet: type 31
debug1: SSH2_MSG_KEX_ECDH_REPLY received
debug1: Server host key: ssh-ed25519 SHA256:+DiY3wvvV6TuJJhbpZisF/zLDA0zPMSvHdkr4UvCOqU
debug3: record_hostkey: found key type ED25519 in file /home/skato/.ssh/known_hosts:3
debug3: record_hostkey: found key type ECDSA in file /home/skato/.ssh/known_hosts:4
debug3: record_hostkey: found key type RSA in file /home/skato/.ssh/known_hosts:12
debug3: load_hostkeys_file: loaded 3 keys from github.com
debug1: load_hostkeys: fopen /home/skato/.ssh/known_hosts2: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory
debug1: Host 'github.com' is known and matches the ED25519 host key.
debug1: Found key in /home/skato/.ssh/known_hosts:3
debug3: send packet: type 21
debug2: ssh_set_newkeys: mode 1
debug1: rekey out after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: receive packet: type 21
debug1: SSH2_MSG_NEWKEYS received
debug2: ssh_set_newkeys: mode 0
debug1: rekey in after 134217728 blocks
debug1: Will attempt key: /home/skato/.ssh/id_rsa RSA SHA256:zaBX+3TpV+3eRToKSta/UFkCrA+YnOfS25Ki4179Txg
debug1: Will attempt key: /home/skato/.ssh/id_ecdsa
debug1: Will attempt key: /home/skato/.ssh/id_ecdsa_sk
debug1: Will attempt key: /home/skato/.ssh/id_ed25519
debug1: Will attempt key: /home/skato/.ssh/id_ed25519_sk
debug1: Will attempt key: /home/skato/.ssh/id_xmss
debug1: Will attempt key: /home/skato/.ssh/id_dsa
debug2: pubkey_prepare: done
debug3: send packet: type 5
debug3: receive packet: type 7
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=<[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],ssh-ed25519,ecdsa-sha2-nistp521,ecdsa-sha2-nistp384,ecdsa-sha2-nistp256,rsa-sha2-512,rsa-sha2-256,ssh-rsa>
debug3: receive packet: type 6
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug3: send packet: type 50
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey
debug3: start over, passed a different list publickey
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /home/skato/.ssh/id_rsa RSA SHA256:zaBX+3TpV+3eRToKSta/UFkCrA+YnOfS25Ki4179Txg
debug3: send packet: type 50
debug2: we sent a publickey packet, wait for reply
debug3: receive packet: type 60
debug1: Server accepts key: /home/skato/.ssh/id_rsa RSA SHA256:zaBX+3TpV+3eRToKSta/UFkCrA+YnOfS25Ki4179Txg
debug3: sign_and_send_pubkey: using publickey with RSA SHA256:zaBX+3TpV+3eRToKSta/UFkCrA+YnOfS25Ki4179Txg
debug3: sign_and_send_pubkey: signing using rsa-sha2-512 SHA256:zaBX+3TpV+3eRToKSta/UFkCrA+YnOfS25Ki4179Txg
debug3: send packet: type 50
debug3: receive packet: type 52
Authenticated to github.com ([140.82.121.4]:22) using "publickey".
debug1: channel 0: new session [client-session] (inactive timeout: 0)
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug3: send packet: type 90
debug1: Entering interactive session.
debug1: pledge: filesystem
debug3: client_repledge: enter
debug3: receive packet: type 80
debug1: client_input_global_request: rtype [email protected] want_reply 0
debug3: client_input_hostkeys: received RSA key SHA256:uNiVztksCsDhcc0u9e8BujQXVUpKZIDTMczCvj3tD2s
debug3: client_input_hostkeys: received ECDSA key SHA256:p2QAMXNIC1TJYWeIOttrVc98/R1BUFWu3/LiyKgUfQM
debug3: client_input_hostkeys: received ED25519 key SHA256:+DiY3wvvV6TuJJhbpZisF/zLDA0zPMSvHdkr4UvCOqU
debug1: client_input_hostkeys: searching /home/skato/.ssh/known_hosts for github.com / (none)
debug3: hostkeys_foreach: reading file "/home/skato/.ssh/known_hosts"
debug3: hostkeys_find: found ssh-ed25519 key at /home/skato/.ssh/known_hosts:3
debug3: hostkeys_find: found ecdsa-sha2-nistp256 key at /home/skato/.ssh/known_hosts:4
debug3: hostkeys_find: found ssh-rsa key at /home/skato/.ssh/known_hosts:12
debug1: client_input_hostkeys: searching /home/skato/.ssh/known_hosts2 for github.com / (none)
debug1: client_input_hostkeys: hostkeys file /home/skato/.ssh/known_hosts2 does not exist
debug3: client_input_hostkeys: 3 server keys: 0 new, 3 retained, 0 incomplete match. 0 to remove
debug1: client_input_hostkeys: no new or deprecated keys from server
debug3: client_repledge: enter
debug3: receive packet: type 91
debug2: channel_input_open_confirmation: channel 0: callback start
debug2: fd 3 setting TCP_NODELAY
debug3: set_sock_tos: set socket 3 IP_TOS 0x20
debug2: client_session2_setup: id 0
debug2: channel 0: request shell confirm 1
debug3: send packet: type 98
debug3: client_repledge: enter
debug1: pledge: fork
debug2: channel_input_open_confirmation: channel 0: callback done
debug2: channel 0: open confirm rwindow 32000 rmax 35000
약 13분 후:
debug3: receive packet: type 80
debug1: client_input_global_request: rtype [email protected] want_reply 1
debug3: send packet: type 82
debug3: send packet: type 1
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
#0 client-session (t4 [session] r43 i0/0 o0/0 e[write]/0 fd 4/5/6 sock -1 cc -1 io 0x01/0x00)
Connection to github.com closed by remote host.
Transferred: sent 3504, received 2784 bytes, in 780.2 seconds
Bytes per second: sent 4.5, received 3.6
debug1: Exit status -1