오래된 노트북(HP Pavilion Entretainement dv7)을 재사용하려고 하는데 계속 과열 문제가 발생합니다. 이것이 영향이 있는지는 모르겠지만, 충전기를 뽑은 후에 컴퓨터가 시작되지 않습니다(충전하는 동안에만 시작됩니다). Kali Linux 운영 체제를 성공적으로 설치했습니다.
문제가 주로 배터리에 있다고 생각하게 만드는 몇 가지 명령은 다음과 같습니다.
└─# upower -e
/org/freedesktop/UPower/devices/line_power_ACAD
/org/freedesktop/UPower/devices/battery_BAT0
/org/freedesktop/UPower/devices/DisplayDevice
└─# upower -i /org/freedesktop/UPower/devices/battery_BAT0
native-path: BAT0
vendor: Hewlett-Packard
model: Primary
power supply: yes
updated: Sat Sep 2 16:20:15 2023 (16 seconds ago)
has history: yes
has statistics: yes
battery
present: yes
rechargeable: yes
state: pending-charge
warning-level: none
energy: 0 Wh
energy-empty: 0 Wh
energy-full: 73.44 Wh
energy-full-design: 73.44 Wh
energy-rate: 0 W
charge-cycles: N/A
percentage: 0%
capacity: 100%
technology: lithium-ion
icon-name: 'battery-caution-charging-symbolic'
└─# acpi -V
Battery 0: Not charging, 0%, rate information unavailable
Battery 0: design capacity 5100 mAh, last full capacity -51 mAh = -1%
Adapter 0: on-line
Thermal 0: ok, 66.0 degrees C
Thermal 0: trip point 0 switches to mode hot at temperature 100.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 95.0 degrees C
Cooling 0: Processor 0 of 10
Cooling 1: LCD 8 of 10
Cooling 2: Processor 0 of 3
└─# cat /sys/class/thermal/thermal_zone0/trip_point_0_temp
100000
└─# cat /sys/class/thermal/thermal_zone0/trip_point_1_temp
95000
└─# ls /sys/class/thermal/thermal_zone0
available_policies cdev0_weight cdev1_weight integral_cutoff k_po offset slope temp trip_point_0_type trip_point_1_type
cdev0 cdev1 device k_d k_pu policy subsystem trip_point_0_hyst trip_point_1_hyst type
cdev0_trip_point cdev1_trip_point hwmon0 k_i mode power sustainable_power trip_point_0_temp trip_point_1_temp uevent
새 장비를 구입하지 않고도 과열 문제를 해결할 수 있는 방법을 아는 사람이 있습니까?
읽어 주셔서 감사합니다!