$ docker run --rm nginx:alpine
$ docker exec --privileged -it `docker ps -q | head -1` sh
/ # apk add strace lsof
/ # strace -fp1 lsof
strace: Process 1 attached
[pid 1] rt_sigsuspend([], 8 <unfinished ...>
[pid 100] execve("/usr/bin/lsof", ["lsof"], 0x7fff9ca1d308 /* 9 vars */) = 0
[pid 100] arch_prctl(ARCH_SET_FS, 0x7f19d2cc8b48) = 0
[pid 100] set_tid_address(0x7f19d2cc8fb0) = 100
[pid 100] brk(NULL) = 0x55791ae48000
[pid 100] brk(0x55791ae4a000) = 0x55791ae4a000
[pid 100] mmap(0x55791ae48000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x55791ae48000
[pid 100] mprotect(0x7f19d2cc5000, 4096, PROT_READ) = 0
[pid 100] mprotect(0x557919b6d000, 4096, PROT_READ) = 0
[pid 100] prlimit64(0, RLIMIT_NOFILE, NULL, {rlim_cur=1073741816, rlim_max=1073741816}) = 0
[pid 100] close_range(3, 1073741815, 0) = 0
[pid 100] open("/dev/null", O_RDWR|O_LARGEFILE) = 3
[pid 100] close(3) = 0
[pid 100] umask(000) = 022
[pid 100] getpid() = 100
[pid 100] getgid() = 0
[pid 100] getegid() = 0
[pid 100] geteuid() = 0
[pid 100] getuid() = 0
[pid 100] mmap(NULL, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f19d2c2b000
[pid 100] stat("/dev", {st_mode=S_IFDIR|0755, st_size=340, ...}) = 0
[pid 100] open("/", O_RDONLY|O_LARGEFILE) = 3
[pid 100] lseek(3, 1, SEEK_SET) = 1
[pid 100] lstat("/proc/100/fd/3", {st_mode=S_IFLNK|0500, st_size=64, ...}) = 0
[pid 100] open("/proc/100/fdinfo/3", O_RDONLY|O_LARGEFILE) = 4
[pid 100] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f19d2c2a000
[pid 100] read(4, "pos:\t1\nflags:\t0100000\nmnt_id:\t35"..., 1024) = 47
[pid 100] lseek(4, -40, SEEK_CUR) = 7
[pid 100] close(4) = 0
[pid 100] munmap(0x7f19d2c2a000, 4096) = 0
[pid 100] close(3) = 0
[pid 100] open("/proc/mounts", O_RDONLY|O_LARGEFILE) = 3
[pid 100] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f19d2c2a000
[pid 100] read(3, "overlay / overlay rw,relatime,lo"..., 4088) = 2115
[pid 100] pipe([4, 5]) = 0
[pid 100] pipe([6, 7]) = 0
[pid 100] rt_sigprocmask(SIG_BLOCK, ~[RTMIN RT_1 RT_2], [], 8) = 0
[pid 100] rt_sigprocmask(SIG_BLOCK, ~[], ~[KILL STOP RTMIN RT_1 RT_2], 8) = 0
[pid 100] fork(strace: Process 101 attached
) = 101
[pid 101] gettid() = 101
[pid 100] rt_sigprocmask(SIG_SETMASK, ~[KILL STOP RTMIN RT_1 RT_2], <unfinished ...>
[pid 101] rt_sigprocmask(SIG_SETMASK, ~[KILL STOP RTMIN RT_1 RT_2], <unfinished ...>
[pid 100] <... rt_sigprocmask resumed>NULL, 8) = 0
[pid 101] <... rt_sigprocmask resumed>NULL, 8) = 0
[pid 100] rt_sigprocmask(SIG_SETMASK, [], <unfinished ...>
[pid 101] rt_sigprocmask(SIG_SETMASK, [], <unfinished ...>
[pid 100] <... rt_sigprocmask resumed>NULL, 8) = 0
[pid 101] <... rt_sigprocmask resumed>NULL, 8) = 0
[pid 100] close(4 <unfinished ...>
[pid 101] close(0 <unfinished ...>
[pid 100] <... close resumed>) = 0
[pid 101] <... close resumed>) = 0
[pid 100] close(7 <unfinished ...>
[pid 101] close(1 <unfinished ...>
[pid 100] <... close resumed>) = 0
[pid 101] <... close resumed>) = 0
[pid 100] rt_sigprocmask(SIG_UNBLOCK, [RT_1 RT_2], <unfinished ...>
[pid 101] close(2 <unfinished ...>
[pid 100] <... rt_sigprocmask resumed>NULL, 8) = 0
[pid 101] <... close resumed>) = 0
[pid 100] rt_sigaction(SIGALRM, {sa_handler=0x557919b5f4b6, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7f19d2c78acd}, <unfinished ...>
[pid 101] close(3 <unfinished ...>
[pid 100] <... rt_sigaction resumed>{sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
[pid 101] <... close resumed>) = 0
[pid 100] setitimer(ITIMER_REAL, {it_interval={tv_sec=0, tv_usec=0}, it_value={tv_sec=15, tv_usec=0}}, <unfinished ...>
[pid 101] close(5 <unfinished ...>
[pid 100] <... setitimer resumed>{it_interval={tv_sec=0, tv_usec=0}, it_value={tv_sec=0, tv_usec=0}}) = 0
[pid 101] <... close resumed>) = 0
[pid 100] write(5, "\315\364\265\31yU\0\0", 8 <unfinished ...>
[pid 101] close(6 <unfinished ...>
[pid 100] <... write resumed>) = 8
[pid 101] <... close resumed>) = 0
[pid 100] write(5, "\2\0\0\0", 4 <unfinished ...>
[pid 101] close(8 <unfinished ...>
[pid 100] <... write resumed>) = 4
[pid 101] <... close resumed>) = -1 EBADF (Bad file descriptor)
[pid 100] write(5, "/\0", 2 <unfinished ...>
[pid 101] close(9 <unfinished ...>
[pid 100] <... write resumed>) = 2
[pid 101] <... close resumed>) = -1 EBADF (Bad file descriptor)
[pid 100] write(5, "\0\20\0\0", 4 <unfinished ...>
[pid 101] close(10 <unfinished ...>
[pid 100] <... write resumed>) = 4
[pid 101] <... close resumed>) = -1 EBADF (Bad file descriptor)
[pid 100] read(6, <unfinished ...>
[pid 101] close(11) = -1 EBADF (Bad file descriptor)
[pid 101] close(12) = -1 EBADF (Bad file descriptor)
[pid 101] close(13) = -1 EBADF (Bad file descriptor)
[pid 101] close(14) = -1 EBADF (Bad file descriptor)
[pid 101] close(15) = -1 EBADF (Bad file descriptor)
[pid 101] close(16) = -1 EBADF (Bad file descriptor)
[pid 101] close(17) = -1 EBADF (Bad file descriptor)
[pid 101] close(18) = -1 EBADF (Bad file descriptor)
[pid 101] close(19) = -1 EBADF (Bad file descriptor)
...
[pid 101] close(1141630) = -1 EBADF (Bad file descriptor)
[pid 101] close(1141631) = -1 EBADF (Bad file descriptor)
[pid 101] close(1141632) = -1 EBADF (Bad file descriptor)
[pid 101] close(1141633) = -1 EBADF (Bad file descriptor)
[pid 101] close(1141634) = -1 EBADF (Bad file descriptor)
[pid 101] close(1141635) = -1 EBADF (Bad file descriptor)
[pid 101] close(1141636) = -1 EBADF (Bad file descriptor)
[pid 101] close(1141637) = -1 EBADF (Bad file descriptor)
[pid 101] close(1141638) = -1 EBADF (Bad file descriptor)
[pid 101] close(1141639strace: Process 1 detached
strace: Process 100 detached
strace: Process 101 detached
<detached ...>
작동하게 하는 방법이 있나요?
답변1
나에게도 이런 일이 일어났는데 왜 lsof파일 설명자를 닫아야 하는지 잘 모르겠습니다. 이 문제는 FILENO컨테이너 또는 프로세스별로 리소스 제한을 설정하여 해결할 수 있습니다 .
$ docker run -d --rm --name nginx --ulimit nofile=1024 nginx:alpine
또는
$ docker run -d --rm --name nginx nginx:alpine
$ docker exec -it -u root /bin/sh nginx
# ulimit -Sn 1024
# apk add lsof
# lsof
Docker 데몬 구성 파일 이나 명령줄에서 /etc/docker/daemon.json기본 리소스 제한을 설정할 수도 있습니다.
{
"default-ulimits": {
"default-nofile": {
"Name": "nofile",
"Soft": 1024,
"Hard": 65535
}
}
}
ulimit옵션 은 다음을 참조하세요.getrlimit(2). ulimit내장 쉘입니다. 참조ash(1).