Intel 그래픽(Intel NUC)이 통합된 FreeBSD 13.1이 설치되어 있습니다. Intel 그래픽 드라이버와 NVidia 그래픽 드라이버(두 개의 카드가 있음)를 사용하여 ACPI 비디오 지원 유무에 관계없이 시도해 보았습니다. KVM을 통해 한 컴퓨터에서 다른 컴퓨터로 전환하고 다시 돌아올 때마다 모니터가 공백으로 유지됩니다.
SSH를 통해 머신에 연결할 수 있으므로 여전히 실행 중입니다. 이것은 X를 사용할 때와 콘솔로 부팅할 때 모두 발생합니다.
dmesg에는 아무것도 표시되지 않습니다. 온라인으로 검색했는데 관련 콘텐츠를 찾지 못했습니다. 원인은 무엇일까요?
이 문제가 발생한 다른 사람들에게 정보를 제공하기 위해 편집되었습니다. 모니터를 껐다가 다시 켜도 화면이 공백으로 유지됩니다. FreeBSD 대신 Ubuntu Linux를 설치했는데 같은 문제가 발생했습니다. NVidia 드라이버를 5xx에서 4xx로 다운그레이드하면 Linux의 문제를 해결할 수 있습니다.
psi# cat dmesg.boot | grep -i acpi
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ACPI APIC Table: <INTEL NUC11PHB>
acpi0: <INTEL>
Firmware Error (ACPI): Failure creating named object [\134_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20201113/dswload2-480)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372)
Firmware Error (ACPI): Failure creating named object [\134_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20201113/dswload2-480)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3: <ACPI PCI-PCI bridge> at device 7.2 on pci0
pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pci5: <ACPI PCI bus> on pcib7
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134AMW0.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi3: <ACPI-WMI mapping> on acpi0
acpi_wmi4: <ACPI-WMI mapping> on acpi0
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ACPI APIC Table: <INTEL NUC11PHB>
acpi0: <INTEL>
Firmware Error (ACPI): Failure creating named object [\134_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20201113/dswload2-480)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372)
Firmware Error (ACPI): Failure creating named object [\134_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20201113/dswload2-480)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3: <ACPI PCI-PCI bridge> at device 7.2 on pci0
pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pci5: <ACPI PCI bus> on pcib7
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134AMW0.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi3: <ACPI-WMI mapping> on acpi0
acpi_wmi4: <ACPI-WMI mapping> on acpi0
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1
===
psi# grep -i pci dmesg.boot
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Structured Extended Features=0xf3bfa7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0x6053000000-0x6053ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci1: <VGA-compatible display> port 0x3000-0x307f mem 0x6b000000-0x6bffffff,0x6040000000-0x604fffffff,0x6050000000-0x6051ffffff at device 0.0 on pci1
hdac0: <NVIDIA (0x10f9) HDA Controller> mem 0x6c080000-0x6c083fff at device 0.1 on pci1
xhci0: <NVIDIA TU106 USB 3.1 controller> mem 0x6052000000-0x605203ffff,0x6052040000-0x605204ffff at device 0.2 on pci1
pci1: <serial bus> at device 0.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3: <ACPI PCI-PCI bridge> at device 7.2 on pci0
xhci1: <Intel Tiger Lake-LP Thunderbolt 4 USB controller> mem 0x6054190000-0x605419ffff at device 13.0 on pci0
pci0: <serial bus, USB> at device 13.2 (no driver attached)
pci0: <serial bus, USB> at device 13.3 (no driver attached)
xhci2: <Intel Tiger Lake-LP USB 3.2 controller> mem 0x6054180000-0x605418ffff at device 20.0 on pci0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <network> at device 20.3 (no driver attached)
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <serial bus> at device 21.1 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib4
rtsx0: <2.1e Realtek RTS525A PCIe MMC/SD Card Reader> mem 0x6c600000-0x6c600fff at device 0.0 on pci2
pcib5: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib5
igc0: <Intel(R) Ethernet Controller I225-LM> mem 0x6c200000-0x6c2fffff,0x6c300000-0x6c303fff at device 0.0 on pci3
pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib6
nvme0: <Generic NVMe Device> mem 0x6c500000-0x6c503fff at device 0.0 on pci4
pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pci5: <ACPI PCI bus> on pcib7
nvme1: <Generic NVMe Device> mem 0x6c400000-0x6c403fff at device 0.0 on pci5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
hdac1: <Intel Tiger Lake HDA Controller> mem 0x60541a8000-0x60541abfff,0x6054000000-0x60540fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
iwlwifi0: <iwlwifi> mem 0x60541ac000-0x60541affff at device 20.3 on pci0
ig4iic0: <Intel Tiger Lake-LP I2C Controller-4> at device 21.0 on pci0
ig4iic1: <Intel Tiger Lake-LP I2C Controller-5> at device 21.1 on pci0
ichsmb0: <Intel Tiger Lake SMBus controller> port 0xefa0-0xefbf mem 0x60541b4000-0x60541b40ff at device 31.4 on pci0
pci1: unknown notify 0x2
pci1: unknown notify 0x2
pci1: unknown notify 0x2
pci1: unknown notify 0x2
pci1: unknown notify 0x2
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Structured Extended Features=0xf3bfa7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0x6053000000-0x6053ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci1: <VGA-compatible display> port 0x3000-0x307f mem 0x6b000000-0x6bffffff,0x6040000000-0x604fffffff,0x6050000000-0x6051ffffff at device 0.0 on pci1
hdac0: <NVIDIA (0x10f9) HDA Controller> mem 0x6c080000-0x6c083fff at device 0.1 on pci1
xhci0: <NVIDIA TU106 USB 3.1 controller> mem 0x6052000000-0x605203ffff,0x6052040000-0x605204ffff at device 0.2 on pci1
pci1: <serial bus> at device 0.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3: <ACPI PCI-PCI bridge> at device 7.2 on pci0
xhci1: <Intel Tiger Lake-LP Thunderbolt 4 USB controller> mem 0x6054190000-0x605419ffff at device 13.0 on pci0
pci0: <serial bus, USB> at device 13.2 (no driver attached)
pci0: <serial bus, USB> at device 13.3 (no driver attached)
xhci2: <Intel Tiger Lake-LP USB 3.2 controller> mem 0x6054180000-0x605418ffff at device 20.0 on pci0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <network> at device 20.3 (no driver attached)
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <serial bus> at device 21.1 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib4
rtsx0: <2.1e Realtek RTS525A PCIe MMC/SD Card Reader> mem 0x6c600000-0x6c600fff at device 0.0 on pci2
pcib5: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib5
igc0: <Intel(R) Ethernet Controller I225-LM> mem 0x6c200000-0x6c2fffff,0x6c300000-0x6c303fff at device 0.0 on pci3
pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib6
nvme0: <Generic NVMe Device> mem 0x6c500000-0x6c503fff at device 0.0 on pci4
pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pci5: <ACPI PCI bus> on pcib7
nvme1: <Generic NVMe Device> mem 0x6c400000-0x6c403fff at device 0.0 on pci5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
hdac1: <Intel Tiger Lake HDA Controller> mem 0x60541a8000-0x60541abfff,0x6054000000-0x60540fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
iwlwifi0: <iwlwifi> mem 0x60541ac000-0x60541affff at device 20.3 on pci0
ig4iic0: <Intel Tiger Lake-LP I2C Controller-4> at device 21.0 on pci0
ig4iic1: <Intel Tiger Lake-LP I2C Controller-5> at device 21.1 on pci0
ichsmb0: <Intel Tiger Lake SMBus controller> port 0xefa0-0xefbf mem 0x60541b4000-0x60541b40ff at device 31.4 on pci0