☰

git 설치 "sudo: apt-get: 명령을 찾을 수 없음"

tag-icon • tag-icon command-line centos apt yum git
git 설치 "sudo: apt-get: 명령을 찾을 수 없음"

git을 설치하려고 합니다. 다음 명령을 실행합니다.

sudo apt-get install git-core git-gui git-doc

하지만 다음과 같은 오류가 발생했습니다. sudo: apt-get: command not found

어떻게 해야 합니까?

답변1

CentOS 5를 사용하고 있으므로 기본패키지 관리자아니요. 이를 사용하여 프로그램을 설치 yum하려면apt-get

$ sudo yum install <packagename>

그러나 이 방법으로 git을 설치하려고 하면 CentOS 5에서 다음 오류가 발생합니다.

$ sudo yum install git
Setting up Install Process
Parsing package install arguments
No package git available.
Nothing to do

yum이는 알려진 패키지 저장소에 설치에 필요한 rpm(RPM 패키지 관리자 파일)이 포함되어 있지 않음 을 나타냅니다 git. 이는 아마도 CentOS 5가 2007년에 출시되어 git이전에 성숙한 버전 제어 시스템으로 간주되었던 RHEL 5를 기반으로 하기 때문일 것입니다 . 이 문제를 해결하려면 사용된 목록에 추가 저장소를 추가해야 합니다 yum(다음에 따라 RPMforge 저장소를 추가하겠습니다).이 지침).

이는 i386 패키지가 필요하다고 가정합니다. 를 실행하여 테스트합니다 uname -i. x86_64 패키지가 필요한 경우 다음 명령에서 i386의 모든 항목을 x86_64로 바꾸십시오.

먼저 설치 rpmforge-release패키지를 다운로드합니다.

$ wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.3-1.el5.rf.i386.rpm

다음으로 패키지를 확인하고 설치합니다.

$ sudo rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
$ rpm -K rpmforge-release-0.5.3-1.el5.rf.i386.rpm
$ sudo rpm -i rpmforge-release-0.5.3-1.el5.rf.i386.rpm

이제 다음을 설치할 수 있습니다 git:

$ sudo yum install git-gui

yum종속성이 결정되고 해당 지점에서 계속할지 묻는 메시지가 표시됩니다. y"예"를 누르 n거나 return"아니오"를 누르세요.

답변2

데비안 관련 배포판을 사용하고 있습니까? 그렇지 않은 경우 YUM(현재 Red Hat, CentOS 등), Portage, Entropy, RPM 등과 같은 다른 패키지 관리자를 사용해야 할 수도 있습니다.

Debian 관련 배포판을 사용하는 경우:

그것은 당신에게 무엇을 제공합니까?

$ command -V apt-get
apt-get is /usr/bin/apt-get

바이너리가 실제로 존재합니까?

$ file /usr/bin/apt-get
/usr/bin/apt-get: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.18, stripped

답변3

소스에서 Git을 빌드하려는 경우 다음이 도움이 될 수 있습니다. 빌드 스크립트는 다음에서 나옵니다.Noloader Github 빌드 스크립트 |. CentOS 5 및 MIPS ci20 보드와 같은 이전 운영 체제에서 사용합니다. 배포판은 더 이상 저장소를 유지하지 않으므로 이것이 소프트웨어를 업데이트하는 유일하고 안정적인 방법입니다. Oracle에서는 업데이트를 받으려면 서비스 계약을 구매해야 하기 때문에 이러한 스크립트는 Solaris와 같은 최신 운영 체제에서도 유용합니다.

이것은 Git 스크립트입니다. 답변에 실질적인 내용이 있는지 확인하기 위해 여기에 추가되었습니다. 하지만 특정 패키지의 최신 버전을 얻기 위해 때때로 GitHub를 수정하므로 GitHub로 돌아가야 합니다.

#!/usr/bin/env bash

# See fixup for INSTALL_LIBDIR below
INSTALL_PREFIX=/usr/local
INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"

# OpenSSH can only use OpenSSL 1.0.2 at the moment
OPENSSL_TAR=openssl-1.0.2l.tar.gz
OPENSSL_DIR=openssl-1.0.2l
#OPENSSL_TAR=openssl-1.1.0e.tar.gz
#OPENSSL_DIR=openssl-1.1.0e

ZLIB_TAR=zlib-1.2.11.tar.gz
ZLIB_DIR=zlib-1.2.11

BZ2_TAR=bzip2-1.0.6.tar.gz
BZ2_DIR=bzip2-1.0.6

READLN_TAR=readline-7.0.tar.gz
READLN_DIR=readline-7.0

UNISTR_TAR=libunistring-0.9.7.tar.gz
UNISTR_DIR=libunistring-0.9.7

ICONV_TAR=libiconv-1.15.tar.gz
ICONV_DIR=libiconv-1.15

IDN2_TAR=libidn2-0.16.tar.gz
IDN2_DIR=libidn2-0.16

PCRE_TAR=pcre-8.40.tar.gz
PCRE_DIR=pcre-8.40

PCRE2_TAR=pcre2-10.23.tar.gz
PCRE2_DIR=pcre2-10.23

CURL_TAR=curl-7.54.0.tar.gz
CURL_DIR=curl-7.54.0

GIT_TAR=v2.13.0.tar.gz
GIT_DIR=git-2.13.0

# Unset to avoid using an existing trust store when configuring cURL.
# No trust store will be supplied for some OSes, like Solaris.
# Also see '/usr/bin/curl-config --ca' and '/usr/bin/curl-config --configure'
USE_TRUST_STORE=1

###############################################################################

# Autotools on Solaris has an implied requirement for GNU gear. Things fall apart without it.
# Also see https://blogs.oracle.com/partnertech/entry/preparing_for_the_upcoming_removal.
if [[ -d "/usr/gnu/bin" ]]; then
    if [[ ! ("$PATH" == *"/usr/gnu/bin"*) ]]; then
        echo
        echo "Adding /usr/gnu/bin to PATH for Solaris"
        PATH="/usr/gnu/bin:$PATH"
    fi
elif [[ -d "/usr/swf/bin" ]]; then
    if [[ ! ("$PATH" == *"/usr/sfw/bin"*) ]]; then
        echo
        echo "Adding /usr/sfw/bin to PATH for Solaris"
        PATH="/usr/sfw/bin:$PATH"
    fi
elif [[ -d "/usr/ucb/bin" ]]; then
    if [[ ! ("$PATH" == *"/usr/ucb/bin"*) ]]; then
        echo
        echo "Adding /usr/ucb/bin to PATH for Solaris"
        PATH="/usr/ucb/bin:$PATH"
    fi
fi

###############################################################################

if [[ -z `which autoreconf` ]]; then
    echo "Some packages require autoreconf. Please install autoconf or automake."
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

if [[ -z `which msgfmt` ]]; then
    echo "Git requires msgfmt. Please install gettext."
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

###############################################################################

echo
echo "If you enter a sudo password, then it will be used for installation."
echo "If you don't enter a password, then ensure INSTALL_PREFIX is writable."
echo "To avoid sudo and the password, just press ENTER and they won't be used."
read -s -p "Please enter password for sudo: " SUDO_PASSWWORD
echo

###############################################################################

THIS_SYSTEM=$(uname -s 2>&1)
IS_DARWIN=$(echo -n "$THIS_SYSTEM" | grep -i -c darwin)
IS_LINUX=$(echo -n "$THIS_SYSTEM" | grep -i -c linux)
IS_CYGWIN=$(echo -n "$THIS_SYSTEM" | grep -i -c cygwin)
IS_MINGW=$(echo -n "$THIS_SYSTEM" | grep -i -c mingw)
IS_OPENBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c openbsd)
IS_DRAGONFLY=$(echo -n "$THIS_SYSTEM" | grep -i -c dragonfly)
IS_FREEBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c freebsd)
IS_NETBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c netbsd)
IS_SOLARIS=$(echo -n "$THIS_SYSTEM" | grep -i -c sunos)

if [[ ("$IS_FREEBSD" -eq "1" || "$IS_OPENBSD" -eq "1" || "$IS_NETBSD" -eq "1" || "$IS_DRAGONFLY" -eq "1" || "$IS_SOLARIS" -eq "1") ]]; then
    if [[ !(-z `which gmake 2>/dev/null | grep -v 'no gmake'`) ]]; then
        MAKE=gmake
    else
        MAKE=make
    fi
else
    MAKE=make
fi

# Try to determine 32 vs 64-bit, /usr/local/lib, /usr/local/lib32 and /usr/local/lib64
# The Autoconf programs misdetect Solaris as x86 even though its x64. OpenBSD has
# getconf, but it does not have LONG_BIT.
IS_64BIT=$(getconf LONG_BIT 2>&1 | grep -i -c 64)
if [[ "$IS_64BIT" -eq "0" ]]; then
    IS_64BIT=$(file /bin/ls 2>&1 | grep -i -c '64-bit')
fi

if [[ "$IS_SOLARIS" -eq "1" ]]; then
    SH_KBITS=64
    SH_MARCH=-m64
    INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"
    INSTALL_LIBDIR_DIR="lib64"
elif [[ "$IS_64BIT" -eq "1" ]]; then
    if [[ (-d /usr/lib) && (-d /usr/lib32) ]]; then
        SH_KBITS=64
        SH_MARCH=-m64
        INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
        INSTALL_LIBDIR_DIR="lib"
    elif [[ (-d /usr/lib) && (-d /usr/lib64) ]]; then
        SH_KBITS=64
        SH_MARCH=-m64
        INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"
        INSTALL_LIBDIR_DIR="lib64"
    else
        SH_KBITS=64
        SH_MARCH=-m64
        INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
        INSTALL_LIBDIR_DIR="lib"
    fi
else
    SH_KBITS=32
    SH_MARCH=-m32
    INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
    INSTALL_LIBDIR_DIR="lib"
fi

if [[ -z "$CC" ]]; then CC=`which cc`; fi

MARCH_ERROR=`$CC $SH_MARCH -x c -c -o /dev/null - </dev/null 2>&1 | grep -i -c error`
if [[ "$MARCH_ERROR" -ne "0" ]]; then
    SH_MARCH=
fi

echo
echo "********** libdir **********"
echo
echo "Using libdir $INSTALL_LIBDIR"

###############################################################################

echo
echo "********** zLib **********"
echo

wget "http://www.zlib.net/$ZLIB_TAR" -O "$ZLIB_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download zLib"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$ZLIB_DIR" &>/dev/null
tar -xzf "$ZLIB_TAR"
cd "$ZLIB_DIR"

SH_LDLIBS=("-ldl -lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure zLib"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build zLib"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Bzip **********"
echo

wget "http://www.bzip.org/1.0.6/$BZ2_TAR" -O "$BZ2_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download Bzip"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$BZ2_DIR" &>/dev/null
tar -xzf "$BZ2_TAR"
cd "$BZ2_DIR"

# Fix Bzip install paths
cp Makefile Makefile.orig
sed 's|$(PREFIX)/lib|$(LIBDIR)|g' Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed 's|$(PREFIX)/lib|$(LIBDIR)|g' Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig

# Fix Bzip cpu architecture
cp Makefile Makefile.orig
sed "s|CFLAGS=|CFLAGS=$SH_MARCH |g" Makefile.orig > Makefile
cp Makefile Makefile.orig
sed "s|CXXFLAGS=|CXXFLAGS=$SH_MARCH |g" Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|CFLAGS=|CFLAGS=$SH_MARCH |g" Makefile-libbz2_so.orig > Makefile-libbz2_so
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|CXXFLAGS=|CXXFLAGS=$SH_MARCH |g" Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig

# Add RPATH
cp Makefile Makefile.orig
sed "s|LDFLAGS=|LDFLAGS=$SH_MARCH -Wl,-rpath,$INSTALL_LIBDIR -L$INSTALL_LIBDIR|g" Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|LDFLAGS=|LDFLAGS=$SH_MARCH -Wl,-rpath,$INSTALL_LIBDIR -L$INSTALL_LIBDIR|g" Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build Bzip"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install PREFIX="$INSTALL_PREFIX" LIBDIR="$INSTALL_LIBDIR")
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Unistring **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/gnu/libunistring/$UNISTR_TAR" --no-check-certificate -O "$UNISTR_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$UNISTR_DIR" &>/dev/null
tar -xzf "$UNISTR_TAR"
cd "$UNISTR_DIR"

SH_LDLIBS=("-ldl -lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Readline **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/gnu/readline/$READLN_TAR" --no-check-certificate -O "$READLN_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download Readline"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$READLN_DIR" &>/dev/null
tar -xzf "$READLN_TAR"
cd "$READLN_DIR"

SH_LDLIBS=("-ldl" "-lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure Readline"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build Readline"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** iConvert **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/pub/gnu/libiconv/$ICONV_TAR" --no-check-certificate -O "$ICONV_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download iConvert"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$ICONV_DIR" &>/dev/null
tar -xzf "$ICONV_TAR"
cd "$ICONV_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure iConvert"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build iConvert"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** IDN2 **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://alpha.gnu.org/gnu/libidn/$IDN2_TAR" --no-check-certificate -O "$IDN2_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$IDN2_DIR" &>/dev/null
tar -xzf "$IDN2_TAR"
cd "$IDN2_DIR"

if [[ "$IS_SOLARIS" -eq "1" ]]; then
    cp src/idn2.c src/idn2.c.orig
    sed '/^#include "error.h"/d' src/idn2.c.orig > src/idn2.c
    cp src/idn2.c src/idn2.c.orig
    sed '43istatic void error (int status, int errnum, const char *format, ...);' src/idn2.c.orig > src/idn2.c
    rm src/idn2.c.orig

    echo "" >> src/idn2.c
    echo "static void" >> src/idn2.c
    echo "error (int status, int errnum, const char *format, ...)" >> src/idn2.c
    echo "{" >> src/idn2.c
    echo "  va_list args;" >> src/idn2.c
    echo "  va_start(args, format);" >> src/idn2.c
    echo "  vfprintf(stderr, format, args);" >> src/idn2.c
    echo "  va_end(args);" >> src/idn2.c
    echo "  exit(status);" >> src/idn2.c
    echo "}" >> src/idn2.c
    echo "" >> src/idn2.c
fi

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** OpenSSL **********"
echo

# wget on Ubuntu 16 cannot validate against Let's Encrypt certificate
wget "https://www.openssl.org/source/$OPENSSL_TAR" --no-check-certificate -O "$OPENSSL_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download OpenSSL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$OPENSSL_DIR" &>/dev/null
tar -xzf "$OPENSSL_TAR"
cd "$OPENSSL_DIR"

# OpenSSL and enable-ec_nistp_64_gcc_128 option
IS_X86_64=$(uname -m 2>&1 | egrep -i -c "(amd64|x86_64)")
if [[ "$SH_KBITS" -eq "32" ]]; then IS_X86_64=0; fi

CONFIG=./config
CONFIG_FLAGS=("no-ssl2" "no-ssl3" "no-comp" "shared" "-DNDEBUG" "-Wl,-rpath,$INSTALL_LIBDIR"
        "--prefix=$INSTALL_PREFIX" "--openssldir=$INSTALL_PREFIX" "--libdir=$INSTALL_LIBDIR_DIR")
if [[ "$IS_X86_64" -eq "1" ]]; then
    CONFIG_FLAGS+=("enable-ec_nistp_64_gcc_128")
fi

KERNEL_BITS="$SH_KBITS" "$CONFIG" "${CONFIG_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure OpenSSL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4 depend)
"$MAKE" "${MAKE_FLAGS[@]}"

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build OpenSSL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install_sw)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** PCRE **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.pcre.org/pub/pcre/$PCRE_TAR" --no-check-certificate -O "$PCRE_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download PCRE"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$PCRE_DIR" &>/dev/null
tar -xzf "$PCRE_TAR"
cd "$PCRE_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lz" "-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --enable-pcregrep-libz --enable-pcregrep-libbz2 \
    --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure PCRE"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4 all)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build PCRE"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** PCRE2 **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.pcre.org/pub/pcre/$PCRE2_TAR" --no-check-certificate -O "$PCRE2_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download PCRE2"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$PCRE2_DIR" &>/dev/null
tar -xzf "$PCRE2_TAR"
cd "$PCRE2_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lz" "-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --enable-pcre2-8 --enable-pcre2-16 --enable-pcre2-32 \
    --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure PCRE2"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4 all)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build PCRE2"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** cURL **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://curl.haxx.se/download/$CURL_TAR" --no-check-certificate -O "$CURL_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download cURL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$CURL_DIR" &>/dev/null
tar -xzf "$CURL_TAR"
cd "$CURL_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lidn2" "-lssl" "-lcrypto" "-lz" "-ldl" "-lpthread")

if [[ ("$IS_SOLARIS" -ne ")" && "$USE_TRUST_STORE" -ne "0") ]]; then
  CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --without-ca-bundle --with-ca-path=/etc/openssl/certs --enable-ipv6 \
    --with-nghttp2 --with-ssl="$INSTALL_PREFIX" \
    --with-libidn2="$INSTALL_PREFIX" --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
else
  CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --enable-ipv6 --with-nghttp2 --with-ssl="$INSTALL_PREFIX" \
    --with-libidn2="$INSTALL_PREFIX" --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
fi

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure cURL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build cURL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Git **********"
echo

# wget on Ubuntu 16 cannot validate against DigiCert certificate
wget "https://github.com/git/git/archive/$GIT_TAR" --no-check-certificate -O "$GIT_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$GIT_DIR" &>/dev/null
tar -xzf "$GIT_TAR"
cd "$GIT_DIR"

"$MAKE" configure

if [[ "$?" -ne "0" ]]; then
    echo "Failed to make configure Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

# "Instruct Git to use pthread library?", http://stackoverflow.com/q/43080417/
for file in $(find `pwd` -iname 'Makefile*')
do 
    cp "$file" "$file.orig"
    sed 's|-lrt|-lrt -lpthread|g' "$file.orig" > "$file"
    rm "$file.orig"
done

# Various Solaris 11 workarounds
if [[ "$IS_SOLARIS" -eq "1" ]]; then
    for file in $(find `pwd` -iname 'Makefile*')
    do 
        cp "$file" "$file.orig"
        sed 's|-lsocket|-lnsl -lsocket|g' "$file.orig" > "$file"
        cp "$file" "$file.orig"
        sed 's|/usr/ucb/install|install|g' "$file.orig" > "$file"
        rm "$file.orig"
    done
    for file in $(find `pwd` -iname 'config*')
    do 
        cp "$file" "$file.orig"
        sed 's|-lsocket|-lnsl -lsocket|g' "$file.orig" > "$file"
        cp "$file" "$file.orig"
        sed 's|/usr/ucb/install|install|g' "$file.orig" > "$file"
        rm "$file.orig"
    done
fi

if [[ -e /usr/local/bin/perl ]]; then
    SH_PERL=/usr/local/bin/perl
elif [[ -e /usr/bin/perl ]]; then
    SH_PERL=/usr/bin/perl
else
    SH_PERL=perl
fi

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lssl" "-lcrypto" "-lz" "-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-pthreads --with-lib="$INSTALL_LIBDIR" --with-openssl="$INSTALL_PREFIX" \
    --with-curl="$INSTALL_PREFIX" --with-libpcre="$INSTALL_PREFIX" --with-zlib="$INSTALL_PREFIX" \
    --with-iconv="$INSTALL_PREFIX" --with-perl="$SH_PERL" --prefix="$INSTALL_PREFIX"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

# See INSTALL for the formats and the requirements
MAKE_FLAGS=(-j 4 all)
if [[ ! -z `which asciidoc 2>/dev/null | grep -v 'no asciidoc'` ]]; then
    if [[ ! -z `which makeinfo 2>/dev/null | grep -v 'no makeinfo'` ]]; then
        MAKE_FLAGS+=("man")
    fi
    if [[ ! -z `which xmlto 2>/dev/null | grep -v 'no xmlto'` ]]; then
        MAKE_FLAGS+=("info" "html")
    fi
fi

"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -eq "1" ]]; then
    echo "Failed to build Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

# See INSTALL for the formats and the requirements
MAKE_FLAGS=(install)
if [[ ! -z `which asciidoc 2>/dev/null | grep -v 'no asciidoc'` ]]; then
    if [[ ! -z `which makeinfo 2>/dev/null | grep -v 'no makeinfo'` ]]; then
        MAKE_FLAGS+=("install-man")
    fi
    if [[ ! -z `which xmlto 2>/dev/null | grep -v 'no xmlto'` ]]; then
        MAKE_FLAGS+=("install-info" "install-html")
    fi
fi

if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Cleanup **********"
echo

# Set to false to retain artifacts
if true; then

    ARTIFACTS=("$OPENSSL_TAR" "$OPENSSL_DIR" "$UNISTR_TAR" "$UNISTR_DIR" "$READLN_TAR" "$READLN_DIR"
            "$PCRE_TAR" "$PCRE_DIR" "$PCRE2_TAR" "$PCRE2_DIR" "$ZLIB_TAR" "$ZLIB_DIR"  "$BZ2_TAR" "$BZ2_DIR"
            "$IDN2_TAR" "$IDN2_DIR" "$ICONV_TAR" "$ICONV_DIR" "$CURL_TAR" "$CURL_DIR" "$GIT_TAR" "$GIT_DIR")

    for artifact in "${ARTIFACTS[@]}"; do
        rm -rf "$artifact"
    done

    # ./build-git.sh 2>&1 | tee build-git.log
    if [[ -e build-git.log ]]; then
        rm build-git.log
    fi
fi

[[ "$0" = "$BASH_SOURCE" ]] && exit 0 || return 0

만약에sudo비밀번호를 사용하기로 결정한 후 다음을 고려하세요.Bash 기록을 일시적으로 비활성화합니다.따라서 비밀번호는 기록되지 않습니다. 실수로 중요한 정보를 기록하지 않도록 기록을 비활성화하므로 이는 문제가 되지 않습니다.

관련 정보