내 NVME의 상태를 알고 싶습니다.
firstlove@chenli ~> sudo smartctl -A /dev/nvme0n1p3
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.1-arch2-1] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF SMART DATA SECTION ===
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 49 Celsius
Available Spare: 100%
Available Spare Threshold: 5%
Percentage Used: 18%
Data Units Read: 46,120,988 [23.6 TB]
Data Units Written: 343,649,247 [175 TB]
Host Read Commands: 1,184,731,427
Host Write Commands: 3,228,585,654
Controller Busy Time: 4,397
Power Cycles: 922
Power On Hours: 11,374
Unsafe Shutdowns: 292
Media and Data Integrity Errors: 0
Error Information Log Entries: 1,620
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
firstlove@chenli ~> sudo nvme error-log --log-entries=1 /dev/nvme0n1p3
Error Log Entries for device:nvme0n1p3 entries:1
.................
Entry[ 0]
.................
error_count : 1620
sqid : 0
cmdid : 0x10
status_field : 0x2002(Invalid Field in Command: A reserved coded value or an unsupported value in a defined field)
phase_tag : 0
parm_err_loc : 0x28
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
오류가 많은 것 같은데 cmdid : 0x10"과 "status_field : 0x2002"는 무슨 뜻인가요?
답변1
NVMe 로그 항목 외에도 NVMe 드라이브 및 파일 시스템이 제대로 작동합니까?
그렇다면 문제가 될 수도 있을 것 같습니다.
https://www.smartmontools.org/ticket/1222
또한 답변해 주십시오.
매번 동일한 값을 추가합니까?
- 시스템을 다시 시작하시겠습니까?
- 시스템을 대기 상태로 설정하시겠습니까?