브리지 모드의 virtualbox에서 데비안 이미지를 사용하고 있습니다(NAT 네트워크와 동일한 문제). Talos Os를 설치하려고 했지만 인터페이스에 문제가 있습니다. 이 인터페이스가 무엇인지 알려주실 수 있나요 br-0bad60df5a4c
?
osboxes@osboxes:~$ sudo talosctl cluster create
validating CIDR and reserving IPs
generating PKI and tokens
creating network talos-default
creating controlplane nodes
creating worker nodes
renamed talosconfig context "talos-default" -> "talos-default-2"
waiting for API
bootstrap error: 2 error(s) occurred:
rpc error: code = Unavailable desc = connection error: desc = "transport: Error while dialing dial tcp 10.5.0.2
timeout
상호 작용:
osboxes@osboxes:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 08:00:27:a9:1d:5d brd ff:ff:ff:ff:ff:ff
inet 192.168.1.29/24 brd 192.168.1.255 scope global dynamic enp0s3
valid_lft 80005sec preferred_lft 80005sec
inet6 fe80::a00:27ff:fea9:1d5d/64 scope link
valid_lft forever preferred_lft forever
4: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:79:fc:6b:1e brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
5: br-0bad60df5a4c: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:c9:4f:9b:cf brd ff:ff:ff:ff:ff:ff
inet 10.5.0.1/24 brd 10.5.0.255 scope global br-0bad60df5a4c
valid_lft forever preferred_lft forever
inet6 fe80::42:c9ff:fe4f:9bcf/64 scope link
valid_lft forever preferred_lft forever
또한 다음을 찾으십시오.
osboxes@osboxes:~$ sudo talosctl cluster create -?
unknown shorthand flag: '?' in -?
Usage:
talosctl cluster create [flags]
Flags:
--arch string cluster architecture (default "amd64")
--bad-rtc launch VM with bad RTC state (QEMU only)
--cidr string CIDR of the cluster network (IPv4, ULA network for IPv6 is derived in automated way) (default "10.5.0.0/24")
답변1
br-0bad60df5a4c
브리지 인터페이스일 가능성이 높습니다. 를 사용하여 해당 구성을 조사할 수 있습니다 brctl show br-0bad60df5a4c
.