불행하게도 내 raidcard는 4.10.9보다 높은 커널 버전에서는 더 이상 인식되지 않습니다. 그래서 4.10.9에서는 내 디스크가 표시되었지만 4.11로 업데이트한 후에는 더 이상 작동하지 않습니다.
다음은 일부 시스템 정보입니다 inxi -Fxz.
System: Kernel: 4.14.295 x86_64 bits: 64 compiler: gcc v: 10.2.1 Console: tty 0 Distro: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: Micro-Star model: X470 GAMING PLUS MAX (MS-7B79) v: 3.0 serial: <filter>
UEFI: American Megatrends LLC. v: H.D2 date: 09/26/2021
CPU: Info: 6-Core model: AMD Ryzen 5 5600X bits: 64 type: MT MCP arch: Zen 3 rev: 0 L2 cache: 3 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 88797
Speed: 3600 MHz min/max: 2200/3700 MHz boost: enabled Core speeds (MHz): 1: 3600 2: 2878 3: 2869 4: 3593 5: 3594
6: 2879 7: 2880 8: 3594 9: 3598 10: 2874 11: 3593 12: 2873
Graphics: Device-1: NVIDIA GK208B [GeForce GT 730] vendor: ZOTAC driver: nouveau v: kernel bus ID: 27:00.0
Display: server: No display server data found. Headless machine? tty: 270x69
Message: Advanced graphics data unavailable in console for root.
Audio: Device-1: NVIDIA GK208 HDMI/DP Audio vendor: ZOTAC driver: snd_hda_intel v: kernel bus ID: 27:00.1
Device-2: Advanced Micro Devices [AMD] Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel
v: kernel bus ID: 2a:00.4
Sound Server: ALSA v: k4.14.295
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI driver: r8169 v: 2.3LK-NAPI
port: d000 bus ID: 22:00.0
IF: enp34s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel 82572EI Gigabit Ethernet driver: e1000e v: 3.2.6-k port: c000 bus ID: 25:00.0
IF: enp37s0 state: down mac: <filter>
Drives: Local Storage: total: 232.89 GiB used: 39.07 GiB (16.8%)
ID-1: /dev/sda vendor: Crucial model: CT250MX500SSD4 size: 232.89 GiB temp: 33 C
Partition: ID-1: / size: 226.74 GiB used: 39.07 GiB (17.2%) fs: ext4 dev: /dev/sda2
ID-2: /boot/efi size: 511 MiB used: 3.4 MiB (0.7%) fs: vfat dev: /dev/sda1
Swap: ID-1: swap-1 type: partition size: 977 MiB used: 0 KiB (0.0%) dev: /dev/sda3
Sensors: Message: No sensors data was found. Is sensors configured?
Info: Processes: 174 Uptime: 10m Memory: 31.4 GiB used: 624.8 MiB (1.9%) Init: systemd runlevel: 5 Compilers: gcc: 10.2.1
Packages: 519 Shell: Bash v: 5.1.4 inxi: 3.3.01
dmesg커널 4.9.330(작동 중):
[ 1.099063] pci 0000:00:03.2: scanning [bus 28-28] behind bridge, pass 0
[ 1.099099] pci_bus 0000:28: scanning bus
[ 1.099112] pci 0000:28:00.0: [1000:0060] type 00 class 0x010400
[ 1.099136] pci 0000:28:00.0: reg 0x10: [mem 0xfc940000-0xfc97ffff 64bit]
[ 1.099147] pci 0000:28:00.0: reg 0x18: [io 0xe000-0xe0ff]
[ 1.099164] pci 0000:28:00.0: reg 0x1c: [mem 0xfc900000-0xfc93ffff 64bit]
[ 1.099185] pci 0000:28:00.0: reg 0x30: [mem 0xfc980000-0xfc99ffff pref]
[ 1.099251] pci 0000:28:00.0: supports D1
[ 1.111045] pci_bus 0000:28: fixups for bus
[ 1.111045] pci 0000:00:03.2: PCI bridge to [bus 28]
[ 1.111049] pci 0000:00:03.2: bridge window [io 0xe000-0xefff]
[ 1.111051] pci 0000:00:03.2: bridge window [mem 0xfc900000-0xfc9fffff]
[ 1.111055] pci_bus 0000:28: bus scan returning with max=28
[ 1.111058] pci 0000:00:07.1: scanning [bus 29-29] behind bridge, pass 0
lspci -v커널 4.9.330에서:
28:00.0 RAID bus controller: Broadcom / LSI MegaRAID SAS 1078 (rev 04)
Subsystem: Broadcom / LSI MegaRAID SAS 1078
Flags: bus master, fast devsel, latency 0, IRQ 234, IOMMU group 16
Memory at fc940000 (64-bit, non-prefetchable) [size=256K]
I/O ports at e000 [size=256]
Memory at fc900000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fc980000 [disabled] [size=128K]
Capabilities: [b0] Express Endpoint, MSI 00
Capabilities: [c4] MSI: Enable- Count=1/4 Maskable- 64bit+
Capabilities: [d4] MSI-X: Enable+ Count=4 Masked-
Capabilities: [e0] Power Management version 2
Capabilities: [ec] Vital Product Data
Capabilities: [100] Power Budgeting <?>
Kernel driver in use: megaraid_sas
Kernel modules: megaraid_sas
dmesg커널 4.14.295(작동하지 않음):
[ 0.312039] pci 0000:00:03.2: scanning [bus 28-28] behind bridge, pass 0
[ 0.512001] pci_bus 0000:28: scanning bus
[ 0.712001] pci_bus 0000:28: fixups for bus
[ 0.712001] pci 0000:00:03.2: PCI bridge to [bus 28]
[ 0.712005] pci 0000:00:03.2: bridge window [io 0xe000-0xefff]
[ 0.712007] pci 0000:00:03.2: bridge window [mem 0xfc900000-0xfc9fffff]
[ 0.712011] pci_bus 0000:28: bus scan returning with max=28
[ 0.712013] pci 0000:00:07.1: scanning [bus 29-29] behind bridge, pass 0
주석( lspci -s 28:00.0및 lspci -n -s 28:0.0)은 커널 4.14.295에서 아무것도 반환하지 않습니다. 그리고 modprobe megaraid_sas그것은 아무것도 바꾸지 않을 것입니다.
불행하게도 저는 커널 컴파일 세계에 익숙하지 않습니다(저는 이 튜토리얼을 사용했습니다)https://askubuntu.com/a/513243), 더 나은 디버깅을 위해 구체적으로 어떤 수정이 필요한지 모르겠습니다. 커널을 컴파일하고 PCI 디버깅을 활성화했습니다. 커널 4.9.330에서는 이 구성 파일을 사용했습니다.https://www.pastery.net/uuccaz/ 4.14.295의 경우 나는 사용합니다https://www.pasery.net/adfuyx/.
변경 로그에서도 변경 사항을 찾아보았습니다.https://mirrors.edge.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.10.9그리고https://mirrors.edge.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.11.1, 하지만 안타깝게도 그곳에서도 아무것도 찾지 못했습니다.
모든 아이디어에 정말 감사드립니다!