존재하지 않는 RAID로 인해 충돌 발생

에 따르면 내 RAID가 존재하지 않습니다 mdadm md10.

정기적으로 다음 오류로 인해 내 OS가 완전히 충돌합니다.

md10에 대한 액세스 시간이 초과되었습니다.

그것을 제거하는 다른 방법이 있습니까? 내 시스템에서 볼 수 없는 mdadm것처럼 실제로 다른 곳에 는 존재하지 않습니다.gparted

cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0] [raid1] [raid10] 
md127 : active raid5 sde18[3] sdb4[4] sdb17[1]
      409335808 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]
      bitmap: 0/2 pages [0KB], 65536KB chunk

unused devices: <none>

md10 산화질소

다음은 "md10"이 어딘가에 구성되어 있음을 확인하는 로그의 일부입니다. 문제는 여전히 존재합니다. 어디에 있습니까?

:0\x2dpart1.device/start failed with result 'timeout'.
Sep 01 19:12:46 q5-desktop systemd[1]: dev-disk-by\x2dpath-pci\x2d0000:00:14.0\x2dusb\x2d0:1.3:1.0\x2dscsi\x2d0:0:0:0\x2dpart5.device: Job dev-disk-by\x2dpath-pci\x2d0000:00:14.0\x2dusb\x2d0:1.3:1.0\x2dscsi\x2d0:0:0:0\x2dpart5.device/start timed out.
Sep 01 19:12:46 q5-desktop systemd[1]: Timed out waiting for device /dev/disk/by-path/pci-0000:00:14.0-usb-0:1.3:1.0-scsi-0:0:0:0-part5.
Sep 01 19:12:46 q5-desktop systemd[1]: Dependency failed for /mnt/pci-0000:00:14.0-usb-0:1.3:1.0-scsi-0:0:0:0-part5.
Sep 01 19:12:46 q5-desktop systemd[1]: mnt-pci\x2d0000:00:14.0\x2dusb\x2d0:1.3:1.0\x2dscsi\x2d0:0:0:0\x2dpart5.mount: Job mnt-pci\x2d0000:00:14.0\x2dusb\x2d0:1.3:1.0\x2dscsi\x2d0:0:0:0\x2dpart5.mount/start failed with result 'dependency'.
Sep 01 19:12:46 q5-desktop systemd[1]: dev-disk-by\x2dpath-pci\x2d0000:00:14.0\x2dusb\x2d0:1.3:1.0\x2dscsi\x2d0:0:0:0\x2dpart5.device: Job dev-disk-by\x2dpath-pci\x2d0000:00:14.0\x2dusb\x2d0:1.3:1.0\x2dscsi\x2d0:0:0:0\x2dpart5.device/start failed with result 'timeout'.
Sep 01 19:12:46 q5-desktop systemd[1]: dev-md10.device: Job dev-md10.device/start timed out.
Sep 01 19:12:46 q5-desktop systemd[1]: Timed out waiting for device /dev/md10.
Sep 01 19:12:46 q5-desktop systemd[1]: Dependency failed for /mnt/md10.
Sep 01 19:12:46 q5-desktop systemd[1]: mnt-md10.mount: Job mnt-md10.mount/start failed with result 'dependency'.
Sep 01 19:12:46 q5-desktop systemd[1]: dev-md10.device: Job dev-md10.device/start failed with result 'timeout'.

내 최선의 추측은 - 불완전한 RAID 5 - 아마도 하나의 디스크 일 것입니다 - 어떻게든 md10을 복구하려고 합니다... RAID "장치"를 설치해야 했지만 실패했습니다...

"설치된 모든 장치를 나열"할 수 있습니까?

이것은 필수입니다cat /etc/fstab

설치를 "제거"하라는 마지막 제안을 실행했지만 여기에 복사하기 위해 액세스할 수 없습니다. 여기서 편집을 마친 후에 시도해 보겠습니다.

$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sde31 during installation
UUID=8a11a155-c003-4bf8-9eb6-9505e4a88085 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sde1 during installation
UUID=2792-8CD9  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0
/dev/md10 /mnt/md10 auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-id/usb-VendorCo_ProductCode_9718791054593227694-0:0-part1 /mnt/usb-VendorCo_ProductCode_9718791054593227694-0:0-part1 auto nosuid,nodev,nofail,x-gvfs-show,x-gvfs-name=USB_125_J 0 0
/dev/disk/by-id/usb-VendorCo_ProductCode_0769581094151700277-0:0 /mnt/usb-VendorCo_ProductCode_0769581094151700277-0:0 auto nosuid,nodev,nofail,x-gvfs-show,x-gvfs-symbolic-icon=USB_125_2 0 0
/dev/disk/by-id/usb-VendorCo_ProductCode_9718791054593227694-0:0-part2 /mnt/usb-VendorCo_ProductCode_9718791054593227694-0:0-part2 auto nosuid,nodev,nofail,x-gvfs-show,x-gvfs-symbolic-icon=USB_124_PART_2 0 0
/dev/disk/by-path/pci-0000:00:14.0-usb-0:1.3:1.0-scsi-0:0:0:0-part5 /mnt/pci-0000:00:14.0-usb-0:1.3:1.0-scsi-0:0:0:0-part5 auto nosuid,nodev,nofail,x-gvfs-show 0 0
LABEL=MDI_RAID_5 /mnt/MDI_RAID_5 auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/md127 /mnt/md127 auto nosuid,nodev,nofail,x-gvfs-show 0 0