SD 카드: 파티션 테이블을 읽을 수 없습니다.

lsblk내 노트북에서 읽을 수 없고 또는 에 설치되거나 표시되지 않는 마이크로 SD 카드가 있습니다 blkid. tail -f /var/log/syslog문제를 나타내는 를 사용하십시오 .

[ 3250.544073] tifm_core: MMC/SD card detected in socket 0:3
[ 3250.689963] mmc0: new SDHC card at address 0007
[ 3250.693295] mmcblk0: mmc0:0007 SD16G 14.4 GiB 
[ 3250.695323] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
[ 3250.763994] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
[ 3250.764048] mmcblk0: retrying using single block read
[ 3250.764462] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0
[ 3250.764901] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0
[ 3250.765534] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0
[ 3250.765963] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0
[ 3250.766391] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0
[ 3250.766817] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0
[ 3250.767246] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0
[ 3250.767672] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0
[ 3251.776249] tifm_sd0:3 : card failed to respond for a long period of time (12, 9)
[ 3251.776273] tifm0 : demand removing card from socket 0:3
[ 3251.776372] mmcblk0: error -123 sending status command, retrying
[ 3251.776381] mmcblk0: error -123 sending status command, retrying
[ 3251.776389] mmcblk0: error -123 sending status command, aborting
[ 3251.776530] mmcblk0: error -123 sending status command, retrying
[ 3251.776539] mmcblk0: error -123 sending status command, retrying
[ 3251.776546] mmcblk0: error -123 sending status command, aborting
[ 3251.776573] ldm_validate_partition_table(): Disk read failed.
[ 3251.776638] mmcblk0: error -123 sending status command, retrying
[ 3251.776646] mmcblk0: error -123 sending status command, retrying
[ 3251.776654] mmcblk0: error -123 sending status command, aborting
[ 3251.776737] mmcblk0: error -123 sending status command, retrying
[ 3251.776745] mmcblk0: error -123 sending status command, retrying
[ 3251.776752] mmcblk0: error -123 sending status command, aborting
[ 3251.776836] mmcblk0: error -123 sending status command, retrying
[ 3251.776844] mmcblk0: error -123 sending status command, retrying
[ 3251.776852] mmcblk0: error -123 sending status command, aborting
[ 3251.776934] mmcblk0: error -123 sending status command, retrying
[ 3251.776942] mmcblk0: error -123 sending status command, retrying
[ 3251.776950] mmcblk0: error -123 sending status command, aborting
[ 3251.776974] Dev mmcblk0: unable to read RDB block 0
[ 3251.777041] mmcblk0: error -123 sending status command, retrying
[ 3251.777049] mmcblk0: error -123 sending status command, retrying
[ 3251.777056] mmcblk0: error -123 sending status command, aborting
[ 3251.777138] mmcblk0: error -123 sending status command, retrying
[ 3251.777147] mmcblk0: error -123 sending status command, retrying
[ 3251.777154] mmcblk0: error -123 sending status command, aborting
[ 3251.777248] mmcblk0: error -123 sending status command, retrying
[ 3251.777257] mmcblk0: error -123 sending status command, retrying
[ 3251.777264] mmcblk0: error -123 sending status command, aborting
[ 3251.777346] mmcblk0: error -123 sending status command, retrying
[ 3251.777355] mmcblk0: error -123 sending status command, retrying
[ 3251.777362] mmcblk0: error -123 sending status command, aborting
[ 3251.777444] mmcblk0: error -123 sending status command, retrying
[ 3251.777452] mmcblk0: error -123 sending status command, retrying
[ 3251.777460] mmcblk0: error -123 sending status command, aborting
[ 3251.777484] mmcblk0: unable to read partition table
[ 3251.781293] mmc0: card 0007 removed
systemd-udevd[2305]: inotify_add_watch(9, /dev/mmcblk0, 10) failed: No such file or directory
[ 3251.844043] tifm_core: MMC/SD card detected in socket 0:3
[ 3252.089018] mmc0: error -110 whilst initialising SD card
[ 3252.269558] mmc0: error -110 whilst initialising SD card

몇 가지(예 sudo apt-get install exfat-fuse exfat-utils:)를 시도하거나 추가했습니다.tifm_sd/etc/modules., 그들 중 누구도 성공하지 못했습니다 . SD 카드(Sony micro sd, HC, 16GB, 90MB/s, SR 16UY3)가 Android 휴대폰과 카메라에서는 제대로 작동하지만 노트북(Ubuntu 18.04, Acer TravelMate 4500)에서는 작동하지 않습니다.고팟, 카드가 보이지 않아요. 다른 SD 카드는 노트북에서 잘 작동합니다.

SD 카드 리더에 대한 정보(가능한 원인을 배제하기 위해 드라이버도 업데이트했습니다) lspci:

CardBus bridge [0607]: Texas Instruments PCIxx21/PCIxx11/PCIx515 PC Card Controller [104c:8031]
    Subsystem: Acer Incorporated [ALI] Extensa 3000 series laptop [1025:0064]
    Flags: bus master, medium devsel, latency 168, IRQ 10
    Memory at e0209000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
    Memory window 0: 80000000-83ffffff (prefetchable)
    Memory window 1: 90000000-93ffffff
    I/O window 0: 00003000-000030ff
    I/O window 1: 00003400-000034ff
    16-bit legacy interface ports at 0001
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: yenta_cardbus
    Kernel modules: yenta_socket

감사해요여러분의 팁을 찾고 있습니다! 추가 정보가 필요하면 알려주시기 바랍니다!