무작위 시스템 정지, VMware 오염 모듈

무작위 시스템 정지, VMware 오염 모듈

시스템 정지 현상이 계속 나타나고 키보드나 마우스가 응답하지 않으며 재부팅한 후에만 작동합니다. 문제 보고서오류 신고:

A kernel problem occurred, but your kernel has been tainted (flags:GDOE). Explanation:
D - Kernel has oopsed before
O - Out-of-tree module has been loaded.
E - Unsigned module has been loaded.
Kernel maintainers are unable to diagnose tainted reports. Tainted modules: vmnet,vmmon.

해당 모듈은 VMware와 관련된 것으로 보입니다.

출력은 dmesg -t --level=alert,crit,err,warn다음과 같습니다

ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
usb: port power management may be unreliable
i8042: Warning: Keylock active
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:07: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
i2c_hid i2c-DELL09A1:00: supply vdd not found, using dummy regulator
i2c_hid i2c-DELL09A1:00: supply vddl not found, using dummy regulator
systemd-sysv-generator[517]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[517]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[517]: SysV service '/etc/rc.d/init.d/vmware-USBArbitrator' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[517]: SysV service '/etc/rc.d/init.d/vmware' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-56.ucode failed with error -2
iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
thermal thermal_zone8: failed to read out thermal zone (-61)
vmmon: loading out-of-tree module taints kernel.
bridge-wlo1: interface wlo1 unregistered without going down! Disabling the bridge

5.9.16-200.fc33.x86_64Dell Latitude 5510 노트북에서 최신 커널 Fedora 33 KDE 플라즈마를 사용합니다. Linux에 익숙해지고 있는 중입니다. 추가 정보가 필요하거나 문제의 원인을 찾기 위해 확인할 수 있는 다른 항목이 있으면 알려 주시기 바랍니다.

고쳐 쓰다

journalctl -b-1 -g failed, journalctl -b-1 -g warn, 의 결과journalctl -b-1 -g error

rngd[238]: [hwrng ]: Initialization Failed
rngd[238]: [pkcs11]: Initialization Failed
rngd[238]: [rtlsdr]: Initialization Failed
kernel: i8042: Warning: Keylock active
kernel: pcieport 0000:00:1c.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
kernel: pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
kernel: RAS: Correctable Errors collector initialized.

로그에서 강조 표시된 다른 항목:

ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored

systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.

kernel: acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
kernel: wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
kernel: acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
kernel: acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
kernel: acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
kernel: acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
kernel: acpi PNP0C14:07: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
kernel: i2c_hid i2c-DELL09A1:00: supply vdd not found, using dummy regulator
kernel: i2c_hid i2c-DELL09A1:00: supply vddl not found, using dummy regulator
systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/smartd.service:10: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/mcelog.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.

관련 정보