무선 USB 어댑터 ZyXel NDW6605가 있고 이를 Debian 10에서 사용하려고 합니다.
Realtek RTL8812AU 칩셋을 사용하므로 여기에서 드라이버를 설치했습니다.https://github.com/lwfinger/rtl8812au그리고 frimware-realtek
포장.
이후 ifconfig 출력에서 wlan 인터페이스를 볼 수 있습니다.
wlp10s0f3u2: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether ba:ec:a3:d9:e6:25 txqueuelen 1000 (Ethernet)
RX packets 11 bytes 1705 (1.6 KiB)
RX errors 0 dropped 61 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlxb8eca3d9e625: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether b8:ec:a3:d9:e6:25 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 61 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
사용 가능한 WiFi 네트워크 목록nmcli dev wifi list
문제는 네트워크에 연결하려고 할 때마다 nmcli dev wifi connect "xxx" password "yyy"
비밀번호를 계속 묻고 수락하지 않는다는 것입니다.
이것은 내 결과입니다 dmesg
.
[ 5.766781] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 31.696023] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[ 64.694789] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[ 85.414295] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[ 91.483427] RTL8812: set ssid [xxx] fw_state=0x00000008
[ 91.565989] RTL8812: start auth
[ 91.570139] RTL8812: auth success, start assoc
[ 91.574308] RTL8812: assoc success
[ 91.577071] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x0fffffff
==> rssi_level:0, rate_bitmap:0x0f8ff015
[ 91.658694] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x0fffffff
==> rssi_level:1, rate_bitmap:0x0f8f0000
[ 99.502134] RTL8812: sta recv deauth reason code(15) sta:18:d6:c7:80:c5:3a
[ 101.957678] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[ 108.028308] RTL8812: set ssid [mim] fw_state=0x00000008
[ 108.155110] RTL8812: start auth
[ 108.158452] RTL8812: auth success, start assoc
[ 108.163228] RTL8812: assoc success
[ 108.166068] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x0fffffff
==> rssi_level:0, rate_bitmap:0x0f8ff015
[ 110.063816] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x0fffffff
==> rssi_level:1, rate_bitmap:0x0f8f0000
[ 136.740938] IPv6: ADDRCONF(NETDEV_UP): wlp10s0f3u2: link is not ready
[ 137.112065] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[ 160.702950] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[ 199.719092] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[ 223.701597] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[ 242.698232] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[ 286.723999] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[ 295.688256] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
인증이 성공했음을 나타내며 sta recv deauth reason code(15)
.
누구든지 이 문제를 해결하도록 도와줄 수 있나요? 감사해요
답변1
대체 드라이버를 찾았습니다.https://github.com/aircrack-ng/rtl8812au. 이건 효과가 있어