☰

Kali Linux가 Wi-Fi 어댑터를 인식하길 원합니다.

tag-icon • tag-icon kali-linux compiling make
Kali Linux가 Wi-Fi 어댑터를 인식하길 원합니다.

저는 칼리리눅스를 사용하고 있습니다. 나는 노력했다

sudo apt update && sudo apt upgrade && sudo apt install linux-headers-$(uname -r)

makeMakefile을 실행할 때 이 문제가 발생했습니다 .

포함된 CD에서 Wi-Fi 어댑터, 칩셋=rt3070용 드라이버를 설치하려고 합니다.

$ lspci 
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 620 (rev 02)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1d.2 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #11 (rev f1)
00:1d.3 PCI bridge: Intel Corporation Device 9d1b (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point LPC Controller/eSPI Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce MX130] (rev a2)
03:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)
04:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)



$ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether d8:c4:99:26:4d:01  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 12  bytes 556 (556.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 12  bytes 556 (556.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.3  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::b333:8bf2:c17f:6ab  prefixlen 64  scopeid 0x20<link>                                                                                              
        ether XX:XX:XX:XX:XX txqueuelen 1000  (Ethernet)
        RX packets 1152  bytes 464903 (454.0 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1260  bytes 216120 (211.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

답변1

실제 모듈을 컴파일할 수 없어 실행 시 sudo make install8192fu.ko를 찾을 수 없고 무선 모듈 디렉터리로 이동할 수 없기 때문에 다음과 같은 오류가 발생합니다.
install: cannot stat '8192fu.ko': No such file or directory

확인하다이 자식 저장소업데이트된 드라이버와 보다 쉬운 설치를 위해.

관련 정보