다시 시작한 후 USB 장치를 다시 연결하고 플러그를 뽑아야 합니다.

컴퓨터를 다시 시작한 후 USB 장치 중 두 개(마우스와 외부 WiFi 어댑터)가 작동하지 않습니다.

프린터, 키보드, 외부 디스크 등 기타 USB 장치는 정상적으로 작동합니다. 그러나 마우스와 Wi-Fi는 예상대로 작동하기 전에 항상 연결을 끊었다가 다시 연결해야 합니다. 전원 코드를 완전히 뽑고 기기를 켰을 때 모든 것이 잘 작동했습니다. 정상적인 종료는 작동하지 않습니다.

나는 주위를 둘러보며 USB 포트 재설정과 같은 다른 제안을 찾았고 이를 위해 이것을 사용했습니다.USBreset유틸리티를 사용하면 약간의 시간(10초)이 걸렸지만 마우스에서는 작동했지만 마우스 코드를 뽑거나 꽂는 작업은 즉시 작동했습니다.

USB 포트를 전환해도 아무런 차이가 없습니다. 다른 USB 포트와 기존 USB 2.0 포트도 사용해 보았습니다.

하지만 내 WiFi 어댑터에서는 작동하지 않습니다. 또한 실행할 때 나열되지 않은 것으로 나타났습니다.LSSB. 두 장치 모두에 작동하는 솔루션이 있습니까?

시스템 메시지:

• 커널 5.5.15-1
• 배급: 만자로
• 데스크탑 환경: KDE 플라즈마 5.18.4
• 마더보드:ASRock B450M Pro4그리고 그것의수동

dmesg 출력의 USB 부분은 다음과 같습니다.

[    8.543260] usb 1-6: Device not responding to setup address.
[    8.621357] usbcore: registered new interface driver usbhid
[    8.621359] usbhid: USB HID core driver
[    8.625461] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.0/0003:045E:07F8.0001/input/input15
[    8.680636] hid-generic 0003:045E:07F8.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:38:00.3-4/input0
[    8.680937] input: Microsoft Wired Keyboard 600 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.1/0003:045E:07F8.0002/input/input16
[    8.740196] input: Microsoft Wired Keyboard 600 System Control as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.1/0003:045E:07F8.0002/input/input17
[    8.740301] hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:38:00.3-4/input1
[    8.950935] fuse: init (API version 7.31)
[    8.950991] *** VALIDATE fuse ***
[    8.950994] *** VALIDATE fuse ***
[   10.563896] kauditd_printk_skb: 24 callbacks suppressed
[   10.563897] audit: type=1130 audit(1586452184.476:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.163360] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 2
[   12.340958] audit: type=1130 audit(1586452186.252:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.344467] audit: type=1130 audit(1586452186.256:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=expressvpn comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.530392] audit: type=1325 audit(1586452186.439:48): table=filter family=2 entries=0
[   12.562109] audit: type=1325 audit(1586452186.472:49): table=filter family=10 entries=0
[   12.774046] aufs 5.5-20200302
[   13.135884] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   13.139005] Bridge firewalling registered
[   13.166492] audit: type=1325 audit(1586452187.076:50): table=nat family=2 entries=0
[   13.201972] audit: type=1325 audit(1586452187.112:51): table=nat family=2 entries=5
[   13.204115] audit: type=1325 audit(1586452187.116:52): table=filter family=2 entries=4
[   13.206234] audit: type=1325 audit(1586452187.116:53): table=filter family=2 entries=6
[   13.208873] audit: type=1325 audit(1586452187.119:54): table=filter family=2 entries=8
[   13.238387] Initializing XFRM netlink socket
[   13.546480] usb 1-6: Device not responding to setup address.
[   13.676962] ahci 0000:15:00.1: port does not support device sleep
[   13.756687] usb 1-6: device not accepting address 3, error -71
[   14.153438] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[   15.977783] kauditd_printk_skb: 37 callbacks suppressed
[   15.977785] audit: type=1131 audit(1586452189.889:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.949402] usb 1-6: Device not responding to setup address.
[   23.952635] usb 1-6: Device not responding to setup address.
[   24.160012] usb 1-6: device not accepting address 4, error -71
[   24.160068] usb usb1-port6: attempt power cycle
[   24.803571] usb 1-6: new high-speed USB device number 5 using xhci_hcd
[   30.016938] usb 1-6: device descriptor read/64, error -110
[   36.163628] audit: type=1131 audit(1586452210.076:93): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.350165] usb 1-5: USB disconnect, device number 2
[   41.610038] usb 1-5: new full-speed USB device number 6 using xhci_hcd
[   42.040881] usb 1-5: New USB device found, idVendor=04d9, idProduct=a070, bcdDevice= 1.04
[   42.040885] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   42.040887] usb 1-5: Product: USB Gaming Mouse
[   42.040889] usb 1-5: Manufacturer: Sun Sonny
[   42.956688] usb 1-6: new high-speed USB device number 7 using xhci_hcd
[   43.014384] usb 1-6: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08
[   43.014389] usb 1-6: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[   43.014391] usb 1-6: Product: UB91C
[   43.014393] usb 1-6: Manufacturer: ATHEROS
[   43.014395] usb 1-6: SerialNumber: 12345
[   43.038423] usb 1-6: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[   43.620567] input: Sun Sonny USB Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-5/1-5:1.0/0003:04D9:A070.0006/input/input18
[   43.677091] holtek_mouse 0003:04D9:A070.0006: input,hidraw2: USB HID v1.10 Keyboard [Sun Sonny USB Gaming Mouse] on usb-0000:15:00.0-5/input0
[   43.677572] input: Sun Sonny USB Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-5/1-5:1.1/0003:04D9:A070.0007/input/input19
[   43.733544] holtek_mouse 0003:04D9:A070.0007: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Sun Sonny USB Gaming Mouse] on usb-0000:15:00.0-5/input1
[   43.733755] holtek_mouse 0003:04D9:A070.0008: hiddev1,hidraw4: USB HID v1.10 Device [Sun Sonny USB Gaming Mouse] on usb-0000:15:00.0-5/input2
[   44.118540] usb 1-6: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[   44.367951] ath9k_htc 1-6:1.0: ath9k_htc: HTC initialized with 33 credits
[   44.382279] mousedev: PS/2 mouse device common for all mice
[   44.594532] ath9k_htc 1-6:1.0: ath9k_htc: FW Version: 1.4
[   44.594535] ath9k_htc 1-6:1.0: FW RMW support: On
[   44.594537] ath: EEPROM regdomain: 0x833a
[   44.594538] ath: EEPROM indicates we should expect a country code
[   44.594539] ath: doing EEPROM country->regdmn map search
[   44.594541] ath: country maps to regdmn code: 0x37
[   44.594542] ath: Country alpha2 being used: GB
[   44.594543] ath: Regpair used: 0x37
[   44.598475] ieee80211 phy0: Atheros AR9271 Rev:1
[   44.611638] ath9k_htc 1-6:1.0 wlp21s0f0u6: renamed from wlan0
[   44.613348] audit: type=1130 audit(1586452218.522:94): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'