4~5년 정도 운영해 온 라즈베리 파이에서는 매 시간마다 cron 작업을 실행해 시간을 설정합니다. 저는 Pi가 더 오래 실행될수록 시간이 표류할 가능성이 더 높다는 것을 경험을 통해 알고 있으므로 Pi를 재설정하는 스크립트를 찾았습니다. 수년간 잘 작동했는데 갑자기 작동이 멈췄습니다. ntp.conf는 여기에 있습니다:
# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
driftfile /var/lib/ntp/ntp.drift
# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable
# You do need to talk to an NTP server or two (or three).
#server ntp.your-provider.example
# pool.ntp.org maps to about 1000 low-stratum NTP servers. Your server will
# pick a different set every time it starts up. Please consider joining the
# pool: <http://www.pool.ntp.org/join.html>
server 0.uk.pool.ntp.org iburst
server 1.uk.pool.ntp.org iburst
server 2.uk.pool.ntp.org iburst
server 3.uk.pool.ntp.org iburst
# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details. The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.
# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default kod notrap nomodify nopeer noquery
restrict -6 default kod notrap nomodify nopeer noquery
# Local users may interrogate the ntp server more closely.
#restrict 127.0.0.1
#restrict ::1
# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust
# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255
# If you want to listen to time broadcasts on your local subnet, de-comment the
# next lines. Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient
내 cron 작업은 다음 스크립트를 실행합니다.
#! /bin/bash
/etc/init.d/ntp stop
ntpd -q -g
/etc/init.d/ntp start
이제 ntp -q -g 명령을 실행할 때 다음 메시지 세트가 표시되고 종료되지 않습니다.
14 Nov 05:43:23 ntpd[1577]: ntpd [email protected] Sat Mar 10 18:03:33 UTC 2018(1): Starting
14 Nov 05:43:23 ntpd[1577]: Command line: ntpd -q -g
14 Nov 05:43:23 ntpd[1577]: proto: precision = 3.000 usec (-18)
restrict 0.0.0.0: KOD does nothing without LIMITED.
14 Nov 05:43:23 ntpd[1577]: restrict 0.0.0.0: KOD does nothing without LIMITED.
restrict ::: KOD does nothing without LIMITED.
14 Nov 05:43:23 ntpd[1577]: restrict ::: KOD does nothing without LIMITED.
14 Nov 05:43:23 ntpd[1577]: Listen and drop on 0 v6wildcard [::]:123
14 Nov 05:43:23 ntpd[1577]: Listen and drop on 1 v4wildcard 0.0.0.0:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 2 lo 127.0.0.1:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 3 eth0 192.168.0.42:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 4 lo [::1]:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 5 eth0 [2a02:c7f:9665:6900:ba27:ebff:fe24:90a5]:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 6 eth0 [fd57:5132:3318:0:ba27:ebff:fe24:90a5]:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 7 eth0 [fe80::ba27:ebff:fe24:90a5%2]:123
14 Nov 05:43:23 ntpd[1577]: Listening on routing socket on fd #24 for interfaceupdates
어떤 아이디어가 있나요? Pi 시계를 시간 서버에 동기화하려면 가장 쉬운 방법은 무엇입니까?