문제 없습니다 ppp. 실행하고 업데이트하면 작동이 중지됩니다.
내 설정:
Lenovo T470s with Fedora 28, Linux user-fedora 4.18.13-200.fc28.x86_64 #1 SMP Wed Oct 10 17:29:59 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
custom board with Linux custom-board-0 4.14.0-xilinx-v2018.2 #1 SMP PREEMPT Mon Sep 24 12:55:51 PDT 2018 armv7l armv7l armv7l GNU/Linux
pppFedora 28에서 실행되는 명령
sudo pppd -detach local debug noauth passive xonxoff lock dump 192.168.10.100:192.168.10.1 /dev/ttyUSB0 9600`
ppp커스텀 보드에서 실행하는 명령
pppd -detach persist debug local noauth passive xonxoff lock dump 192.168.10.1:192.168.10.100 /dev/ttyS0 9600
ppp명령 실행 후 Fedora에 출력
pppd options in effect:
debug # (from command line)
-detach # (from command line)
dump # (from command line)
noauth # (from command line)
/dev/ttyUSB0 # (from command line)
9600 # (from command line)
lock # (from command line)
xonxoff # (from command line)
local # (from command line)
passive # (from command line)
192.168.10.100:192.168.10.1 # (from command line)
using channel 16
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB0
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
LCP: timeout sending Config-Requests
ppp명령 실행 후 보드의 출력을 사용자 정의
pppd options in effect:
debug # (from command line)
-detach # (from command line)
persist # (from command line)
dump # (from command line)
noauth # (from command line)
/dev/ttyS0 # (from command line)
9600 # (from command line)
lock # (from command line)
xonxoff # (from command line)
local # (from command line)
passive # (from command line)
192.168.10.1:192.168.10.100 # (from command line)
using channel 11
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS0
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x4b51417a> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x4b51417a> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x4b51417a> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x4b51417a> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x4b51417a> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x4b51417a> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x4b51417a> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x4b51417a> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x4b51417a> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x4b51417a> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
LCP: timeout sending Config-Requests
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x82da991a> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x82da991a> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x82da991a> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x82da991a> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x1aa6d871> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x82da991a> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x82da991a> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x82da991a> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x82da991a> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x82da991a> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x82da991a> <pcomp> <accomp>]
LCP: timeout sending Config-Requests
Fedora가 LCP 패킷을 보내고 Custom Board가 이를 수신하고, Custom Board가 LCP 패킷을 보내고 있지만 Fedora가 이를 수신하지 못하는 것 같습니다.
문제가 무엇인지, 해결 방법을 아는 사람이 있나요?
답변1
하루 동안 디버깅을 한 후, 문제가 커스텀 보드에 있다는 것을 알게 되었습니다. 커넥터의 핀 중 하나가 전기적으로 손상된 것으로 밝혀졌습니다. 따라서 이것은 Fedora나 PPP 문제가 아니라 하드웨어 커넥터 문제입니다. 관심을 가져주셔서 감사합니다.