외부 모니터 전용 Nvidia Driver/X [디스플레이 포트]

2024-5-29 • tag-icon

Bumblebee가 내 외부 모니터와 작동하도록 할 수 없게 된 후(xrandr는 이를 "인식"하지 않음) Debian을 다시 설치했습니다. Nvidia Dev Forum(atm을 찾을 수 없음)에서 384 설치 제안을 찾았습니다. 이 설정을 통해 NVIDIA가 외부 모니터에서 X를 사용하도록 했습니다. 디스플레이 관리자로 gdm3을 사용하고 있습니다. 모니터 없이 실행하면 X가 (EE) 찾을 수 없음 화면과 함께 충돌이 발생합니다.

WaylandEnable=false댓글을 달아 이 설정을 되돌리면 /etc/gdm3/daemon.conf내 노트북 모니터에서 Gnome(Wayland)을 시작할 수 있습니다. 이제 wayland에서 시작하면 시작 시 루프가 발생합니다.

Nvidia가 2개의 화면을 인식하도록 하려면 어떻게 해야 합니까?

>lspci                                      
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 05)
00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 (rev 31)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #1 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1)
00:1c.6 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #7 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Ti Mobile] (rev a1)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)
04:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

uname -a
Linux hostname 4.13.0-1-amd64 #1 SMP Debian 4.13.4-2 (2017-10-15) x86_64 GNU/Linux

--enable-all-gpus --separate-x-screens가 포함된 새로운 xorg.conf는 이전 것과 다르지 않습니다.

cat /etc/X11/xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 384.90  (buildmeister@swio-display-x86-rhel47-05)  Tue Sep 19 18:13:03 PDT 2017


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    Screen      1  "Screen0 (1)" RightOf "Screen0"
    Screen      2  "Screen0 (2)" RightOf "Screen0 (1)"
    Screen      3  "Screen0 (3)" RightOf "Screen0 (2)"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:1:0:0" #manually added
    Screen          0
EndSection

Section "Device"
    Identifier     "Device0 (1)"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:1:0:0" 
    Screen          1
EndSection

Section "Device"
    Identifier     "Device0 (2)"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:1:0:0"
    Screen          2
EndSection

Section "Device"
    Identifier     "Device0 (3)"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:1:0:0"
    Screen          3
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0 (1)"
    Device         "Device0 (1)"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0 (2)"
    Device         "Device0 (2)"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0 (3)"
    Device         "Device0 (3)"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

이전, 수동으로 수정된 xorg.conf:

cat /etc/X11/xorg.conf.backup:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 384.90  (buildmeister@swio-display-x86-rhel47-05)  Tue Sep 19 18:13:03 PDT 2017

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:1:0:0" #Manually added
EndSection



Section "Device" #Manually added
    Identifier     "intelhd4000" #Manually added
    Driver         "intel" #Manually added
    BusID          "PCI:2:0:0" #Manually added
EndSection       #Manually added


Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

미리 감사드립니다!

관련 정보